In an orbiting space station, an electronic package is housed in a compartment having a surface area 1 m² which is exposed to space. The surface emissivity is 1.0. Under normal operating conditions, the electronics generate 500 W of heat which must be dissipated from the exposed surface to space. If the surface is exposed to a solar flux of 750 W/m² and its absorptivity to solar radiation is 0.25, please find the steady-state temperature of the surface.

In an orbiting space station, an electronic package is housed in a compartment having a surface area 1 m² which is exposed to space. The surface emissivity is 1.0. Under normal operating conditions, the electronics generate 500 W of heat which must be dissipated from the exposed surface to space. If the surface is exposed to a solar flux of 750 W/m² and its absorptivity to solar radiation is 0.25, please find the steady-state temperature of the surface.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The surface of a 0.5-m diameter space probe dissipates 150 W of heat to the outside. If the probe surface emits 80% of the heat that comes from the electronic equipment inside of it and the probe does not receive radiation from other surfaces, compute for the surface emissive power in : m²°
Heat transfer
It is desired to heat the workshop with a stove made of falling cylindrical sheet material with an outer diameter of 400 mm and a height of 1600 mm. The surface temperature of the stove is 217 oC and the radiation emission coefficient is 0.92, the temperature of the workshop surfaces is 12 oC and the ambient temperature of the workshop is 17 oC. Next to the stove, the workshop surface area is very large. From the side surface of the stove to the workshop; a) By transport,b) with radiation Calculate the heat transfer.
The inside surface of an insulation layer is maintained at 350°C and the outside surface dissipates heat by convection and radiation to air and wall, respectively. The temperatures of air and wall are 15 °C. The insulation layer has a thickness of 10 cm and a thermal conductivity of 15 W/m.K. What is the value of the heat transfer coefficient at the outside surface of the layer, if the temperature at the outside surface should not exceed 225 °C? (The emissivity and the width of the surface are 0.3 and1 m., respectively. o-5.67x10-8 W/m²K*). Tw=15°. T=225°C ɛ=0.3 ТЬ3350°C To=15°C h.=? 10 cm
2. Consider steady heat transfer between two large parallel plates at constant temperatures of T1 = 295 K and T2 = 155 K that are L = 2 cm apart. Assuming the surfaces to be black, determine the rate of heat transfer between the plates per unit surface area assuming the gap between the plates is (a) filled with atmospheric air,(k = 0.01979 W/m- o C) (b) evacuated,(c) filled with superinsulation having an apparent thermal conductivity of 0.00015 W/m · °C.
Consider steady heat transfer between two large parallel plates at constant temperatures T1 = 300 K and T2 = 200 K that are L = 1 cm apart, as shown below. Assuming the surface to be black, determine the rate of heat transfer between the plates per unit surface area assuming the gap between the plates is a) filled with still air with k = 0.0219 W/m°C, b) free flowing air with h = 7.5 W/m2°C, c) evacuated, d) filled with urethane insulation with k = 0.026 W/m°C, and e) filled with superinsulation that has an apparent thermal conductivity k = 0.00002 W/m°C PLEASE ANSWER LETTER D AND E, THANK YOU
If you have a room (10*7*3.5m) and you have 2 solar windows (the dimension of the window (2.5*2m)) located in the largest wall and the solar gain of them 1.5 kW/day and you have a door (1.6*2.5 m) in the northern wall and the temperature inside = 21°c and the average temperature outside = 10°C and the natural air change = 0.9 time /hour/day and the characteristics of materials are shown in the table below Elements U value Window 1.4 W/m.K Door 2.5 W/m.K South and North wall 0.5 W/m .K East and west wall 0.65 W/m .K Roof 0.45 W/m.K Floor 0.7 W/m .K If you know that you have 6 fixture lighting units of 50 W and the efficiency of them 70% and their runtime is 10 hours /day and there are 3 persons one of them is cooking and the two other are sleeping and they are present 4 hours/day and if you have the following appliance Appliance Running time Rotisserie 0.2 hour Large refrigerator 5 hours Blender 0.2 hour From your heat balance result decide if we will need a cooling or a heating system…
1) Draw the thermal resistance network representing heat transfer through the shell. 2) Determine the heat rate transfer under steady state conditions (W) 3) Determine the emissive power being emitted from the outside of the cylindrical tank (W). You can ignore emission from the top and bottom surfaces.
Pravinbhai
You want to heat a house on a very cold day as shown in the figure. To do this, you want to use photovoltaic panels as an energy source. It would be about using 15 panels each with an area of 1.5 m2. These panels would be connected to an electrical resistance that would heat the house as shown in the figure. The house is losing heat through the walls and ceiling as shown in the figure. The panels are receiving solar radiation at a rate of 800 W / m2 and if their efficiency is 15%. How much will the temperature of the house rise after an hour? The house is hermetically sealed. Assume that the specific heats of air, cv and cp, are constant as shown in the figure. sol = sun fuga = leakage aire = air
A horizontal steam pipe with an outer surface temperature of 98°C and an outer diameter of 8 cm is covered with a 3 cm thick insulating layer with a surface emissivity of 0.7. The surface temperature of the insulation is 50°C, and the pipe is placed in a 15°C room with atmospheric still air at the same temperature. Calculate: a) Total heat loss from the 12 m length of pipe. b) Thermal conductivity of insulator. Use the empirical correlation for natural convection given below for horizontal cylinders. h=1.24 (AT)3
The horizontal roof of a building has an emittance of 0.9. Air temperature is 1oC on a clear night. Sky acts as a black radiation sink at -60o If the underside of the roof is well insulated, estimate the roof temperature. Assume a convective heat transfer coefficient of 5 W/m2 K.