If the initial composition of the carbon steel is c0=0.3 wt%, calculate the carbon concentration (in wt%) at a distance 0.2mm from the surface of the component after 1 hour of decarburization

According to the following graph, two samples of 1080 steel are cooled from the eutectoid temperature, one at a cooling rate of 250°C/s and the other at a cooling rate of 7.27x10-8 °C/s. Specify the phases obtained and explain their formation from thermodynamic and kinetic perspectives. Also, briefly describe their formation. Draw the microstructure of the phases obtained. Sıcaklık (C) 800 700 600 500 400 300 200 100 0 10 1 T M(başlama) M(% 50) M(% 90) 10 M+O -Otektoid Sıcaklık 10² Zaman (s) % 50 10³ 104 105

[Decarburization] An FCC iron-carbon alloy initially containing carbon with the concentration, C0, is exposed to anoxygen-rich and virtually carbon-free atmosphere. Under the given conditions, the carbon diffuses from the alloy andreacts at the surface with the oxygen in the atmosphere, meaning that the carbon concentration at the surface position is maintained essentially at 0 wt% C. The subproblems are independent.(1) Determine the diffusion coefficient at the temperature T given below.  Use T = 1250 °C(2) When the value of D is given below, what position will the carbon concentration be Cx after a treatment for thetime, t? Use D = 1.93 × 10−10m2 /s; C0 = 0.35 wt%; Cx = 0.11 wt%; t = 12 hr

Read the question carefully and give me right solution according to the question