Ice slurry is being transported in a pipe (k = 15 W/m K, D;= 0.025 m, Do= 0.085 m, and L = 5 m) with an inner surface temperature of 0°C. The ambient condition surrounding the pipe has a temperature of 20°C, a convection heat transfer coefficient of 10 W/m2.K, and a dew point of 10°C. If the outer surface temperature of the pipe drops below the dew point, condensation can occur on the surface. Since this pipe is located in the vicinity of high voltage devices, water droplets from the condensation can cause electrical hazard. To prevent such incident, the pipe surface needs to be insulated. Determine the insulation thickness for the pipe using a material with k= 0.95 W/mK to prevent the outer surface temperature from dropping below the dew point. The insulation thickness required for the pipe is cm.

Ice slurry is being transported in a pipe (k = 15 W/m K, D;= 0.025 m, Do= 0.085 m, and L = 5 m) with an inner surface temperature of 0°C. The ambient condition surrounding the pipe has a temperature of 20°C, a convection heat transfer coefficient of 10 W/m2.K, and a dew point of 10°C. If the outer surface temperature of the pipe drops below the dew point, condensation can occur on the surface. Since this pipe is located in the vicinity of high voltage devices, water droplets from the condensation can cause electrical hazard. To prevent such incident, the pipe surface needs to be insulated. Determine the insulation thickness for the pipe using a material with k= 0.95 W/mK to prevent the outer surface temperature from dropping below the dew point. The insulation thickness required for the pipe is cm.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 6-m-long section of an 9-cm-diameter horizontal hot-water pipe passes through a large room whose temperature is 30 °C. If the outer surface temperature of the pipe is 85 °C, determine the rate of heat loss from the pipe by natural convection. D = 0.0000175 m2/s, k = 0.02699 W/mK, g = 9.81 m/s?, Pr = 0.7241 and B = 0.00314 K-1 Ra # W/m²K W
Air is flowing in parallel over the upper surface of aflat plate with a length of 4 m. The first half of the plate length,from the leading edge, has a constant surface temperatureof 50°C. The second half of the plate length is subjected toa uniform heat flux of 86 W/m2. The air has a free streamvelocity and temperature of 2 m/s and 10°C, respectively.Determine the local convection heat transfer coefficients at1 m and 3 m from the leading edge. Evaluate the air propertiesat a film temperature of 30°C. Is the film temperatureTf = 30°C applicable at x = 3 m?
An average man has abody surface area of 1.8m2 and a skin temperature of 33degrees celcius .The convection heat transfer coefficient for a clothed person walking in still air is expressed as {h,8.6V^0.53}FOR 0.5<v<2m/s,where V is the walking velocityin m/s.Assuming the average surface temperature of the clothed person to be 30degrees celcius, determine the rate of heat loss from an average man walking in still air at 10degrees celcius by convectionat a walking velocity of (a)0.5m/s (b)1.0m/s (c)1.5m/s (d)2.0m/s
Air is flowing in parallel over the upper surface of a flat plate with a length of 4m. The first half of the plate length, from the leading edge, has a constant surface temperature of 50 degrees Celsius. The second half of the plate length is subjected to a uniform heat flux of 86 W/m2. The air has a free stream velocity and temperature of 2 m/s and 10 degrees Celsius, respectively. Determine the local convection heat transfer coefficients at 1 m and 3 m from the leading edge. Evaluate the air properties at a film temperature of 30 degrees Celsius. Is the film temperature Tf=30 degrees Celsius applicable at x = 3 m?
Fill in the blanks: A10-m-long section of a 6-cm-diameter horizontal hot water pipe passes through a large room whose temperature is 22°C. If the temperature of the outer surface of the pipe is 65°C, determine the rate of heat loss from the pipe by natural convection. The properties of air at 1 atm and the film temperature are: V=1.735 x 10^(-5) m^2/s, k=26.88 x 10^(-3) W/(m-K), Pr=0.725 W
Fruit is impeded from ripening when it reaches high temperatures (>32°C). Farmer Joe isworried that Deleware's summer heat wave will affect the ripening of his ground cherries.The spherical fruit (1 cm in diameter) is surrounded by a spherical papery husk (λhusk = 0.3W/m K) with an inner diameter of 2 cm and an outer diameter of 2.1 cm. The air in betweenthe fruit and the husk is stagnant (λair = 0.03 W/m K). On a calm day in July, the delewareair (outside of the husk) is very warm, with a temperature of ~38°C and a heat transfercoefficient of h deleware,calm = 10 W/m 2K. (a) Sketch the system, labeling all temperatures, dimensions, and proportionality constants. (b) sketch the electrical analogy tothis system, labeling all temperatures, resistances, and heat flows (c) what is the overall resistance to heat transfer from the air in Deleware to the fruit?
Consider a hot automotive engine, which can be approximated as a 0.5-m-high, 0.40-m-wide, and 0.8-m-long rectangular block. The bottom surface of the block is at a temperature of 100°C and has an emissivity of 0.95. The ambient air is at 20°C, and the road surface is at 25°C. Determine the rate of heat transfer from the bottom surface of the engine block by convection and radiation as the car travels at a velocity of 80 km/h. Assume the flow to be turbulent over the entire surface because of the constant agitation of the engine block.
A 4 m2window has a surface temperature of 30°C and the outside wind isblowing air at 5°C across it with a convection heat transfer coefficient of h = 200 W/m2K. What is the total heat transfer !
= 0.243 W/m K) while the bottom surface is exposed to a hot steam at 100°C with a convection hea 6-22 The top surface of a metal plate (kplate = 237 W/m-K) is being cooled by air (kair transfer coefficient of 30 W/m2-K. If the bottom surface temperature of the plate is 80°C, determine the temperature gradient in the air and the temperature gradient in the plate at the top surface of the plate. FIGURE P6-22 Air, hi To T2 Solid plate TI Hot steam, hteam. Tool
Question A 2-m2 window has a surface temperature of 15° C, and the outside wind is blowing air at 2° C across it with a convection heat transfer coefficient of h = 125 W/m2 K. What is the total heat transfer loss?
A 6 cm diameter cylinder is initially at a temperature of 10 °C. Later, this cylinder was thrown into water at 80°C. Calculate how long it will take for the center temperature of the cylinder to reach 50 °C by taking the convection heat transfer coefficient as 80W / /m?K. Thermal properties of the cylinder material k=0,587 W/m°C wwww a = 0,13 x10 * m /s attachments Heisler diagrams for cylinder 1.0 F100 50 30 12 0.7 0.5 0.4 0.3 0.2 2.5 3.0 0.1 3 02 B hr 0.07 0.05 0.04 0.03 0,02 0.007 0.005 0.004 0.00 0.002 0.001 ! 2 3 468 101214 16 18 20 22 24 26 28 30 40 50 60 70 B0 90100 115 130 150200 300 kenle)= Fo 1.0 0.2 0.9 0.8 0.4 0.7 0.6 0.6 0.5 0.4 0.3 0.8 0.2 0.9 0.1 1.0 8.01 0.02 0.05 0.1 O.2 0.5 1.0 2 3 5 10 20 CA/hr)- Bi 50 100 T-T
What are the differences between velocity boundary layer and thermal boundary layer? Discuss about both boundary layers including the characteristics, the profiles and factors affecting the boundary layers.