Hot combustion gases, modeled as air behaving as an ideal gas, enter a turbine at 145 lbf/in.2, 2700°R with a mass flow rate of 0.32 lb/sand exit at 29 lbf/in.² and 1620°R.If heat transfer from the turbine to its surroundings occurs at a rate of 20.36 Btu/s, determine the power output of the turbine, in hp.Wev=ihp

Given Data The gas temperature at inlet is:T1=2700°R The gas temperature at exit is:T2=1620°R The…

Hot combustion gases, modeled as air behaving as an ideal gas, enter a turbine at 145 lbf/in.2, 2700°R with a mass flow rate of 0.32 lb/ and exit at 29 lbf/in.² and 1620°R. If heat transfer from the turbine to its surroundings occurs at a rate of 20.36 Btu/s, determine the power output of the turbine, in hp. Wev = i hp

Hot combustion gases, modeled as air behaving as an ideal gas, enter a turbine at 145 lbf/in.2, 2700°R with a mass flow rate of 0.32 lb/ and exit at 29 lbf/in.² and 1620°R. If heat transfer from the turbine to its surroundings occurs at a rate of 20.36 Btu/s, determine the power output of the turbine, in hp. Wev = i hp

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Refrigerant 134a enters a well-insulated nozzle at 200 lbf/in.2, 170°F, with a velocity of 120 ft/s and exits at 50 lbf/in.² with a velocity of 1500 ft/s. For steady-state operation, and neglecting potential energy effects, determine the temperature, in °F, and the quality of the refrigerant at the exit. T₂= x2 = i i °F %
5. Air enters a compressor at a rate of 0.5 Kgs¹ with a velocity of 6.4 ms', specific volume 0.85 m³Kg¹ and a pressure of 1 bar. It leaves the compressor at a pressure of 6.9 bar with a specific volume of 0.16 m³Kg¹ and a velocity of 4.7 ms¹. The internal energy of the air at exit is greater than that at entry by 85 KJKg'. The compressor is fitted with a cooling system which removes heat at a rate of 60 KJs¹. Calculate the power required to drive the compressor and the cross- sectional areas of the inlet and outlet pipes.
Refrigerant 134a enters a well-insulated nozzle at 200 lbf/in.2, 140°F, with a velocity of 120 ft/s and exits at 10 lbf/in.² with a velocity of 1500 ft/s. For steady-state operation, and neglecting potential energy effects, determine the temperature, in °F, and the quality of the refrigerant at the exit. T₂ = i 29.615 x2 = 78.516 % °F
4. thermodynamics
Air enters the cylinder of a 4-stroke gasoline engine at 33°C and 101.2 kPa. Engine clearance is 10.5% of the displacement. 2600 kJ/kg of heat is added during the constant volume heat addition process. Determine the following:a. Pressure & Specific Volume at each state.b. Work per unit mass (using volume and pressure).
1. solve step by step and show proper conversion and cancellation of units.
Fast.
A steady state flow of saturated water vapor at 5 bar with a velocity of 14 m/s enters a horizontal pipe with a diameter of 15 cm. If steam exits the pipe at 4.5 bar with a quality of 94%, calculate the heat transfer for the process in kW. hint: No need to calculate the change in the kinetic energy, use velocity and pipe diameter in the calculation of the mass flow rate а. -63.3 b. -87.1 О с. -95.6 d. -106.8 e. -122.6 O f. -133.4 O g. -145.3
1. An engine rejects 200kW when running at a thermal efficiency of 22%. The calorific value of the fuel used is 42MJ/kg. Determine (i) the heat received by the engine; (ii) the power output in kW, and (iii) the mass of fuel used/h.
Refrigerant 134a enters an insulated diffuser as a saturated vapor at 80°F with a velocity of 1400 ft/s. The inlet area is 1.4 in². At the exit, the pressure is 400 lb/in² and the velocity is negligible. The diffuser operates at steady state and potential energy effects can be eglected. Determine the mass flow rate, in lb/s, and the exit temperature, in °F. Step 1 Your answer is correct. Determine the mass flow rate, in lb/s. m = 28.887 Hint Step 2 lb/s. Determine the exit temperature, in °F. T₂ = i OF Attempts: 1 of 4 used
5. thermodynamics
Five lbs of propane is contained in a closed, rigid tank initially at 80 lbf/in.2, 50°F. Heat transfer occurs until the final temperature in the tank is 0°F. Kinetic and potential energy effects are negligible. Determine the amount of energy transfer by heat, in Btu. Q= i Btu