Hobbing is used almost exclusively for what type of machining operation?

Q: What are the three common types of machining operations and what are the machine tools used in each…

A: given: What are the three common types of machining operations and what are the machine tools used…

Q: Which of the machining process(es) above is(are) most common?

A: OPtion (a) 1 and 2  is correct option

Q: Identify a secondary machining process from the following. [A] Brazing [B] Broaching [C] Buffing [D]…

A: A process on the metal which is performed after completion of the initial manufacturing process is…

Q: Which one is not a chief element in metal cutting process?     Tool life       Cutting speed…

A: We have to find option that is not chief element in metal cutting.

Q: For pocket operation of 2 x 3 inch surface and dept of 0.06 in using 0.5 in end mill tool. What is…

A:

Q: b. A drilling operation is to be performed with a 13 mm diameter HSS twist drill on a mild steel…

A: Given data: d=13 mmT=80 mmt=65 mmv=0.42 m/sf=0.3 mm/rev Need to determine the angle of such drill…

Q: Of the following machining operations listed below which one surface finishing and close tolerance…

A: To give the correct options.

Q: 6) Why are most broaches made from alloy or high-speed steel rather than from tungsten carbide. 7)…

A: Given questions: 6) Why are most broaches made from alloy or high-speed steel rather than from…

Q: ust give a short answer (type written) 1. How is a tool bit blank prepared for use? 2. What is a…

A:

Q: 2.  “Milling is an intermitted cutting operation”. Explain it.

A: Intermittent cutting means the cutting is not continuous. That means at some time tool is in contact…

Q: (a) Conclude the Electron Beam Machining (EBM) and Laser Beam Machining (LBM).

A: Dear student, we are suppose to solve only one question. Please post other question as a separate…

Q: A/ What is the typical application area of the following non-traditional machining methods? 1- USM…

A:

Q: Q1) Explain the four types of chips formation with sketches? What is tool life in Lathe?

A: 1. CONTINUOUS CHIP- As the name shows these types of chips have a continuous segment and produce…

Q: shaper cutting tool

A:

Q: Determine time required for machining?

A: Given data;  A 600mm×30mm flat surface of a plate is to be finsih machined on a shaper. Plate is…

Q: value. The exponent nin Taylor's tool life equation In a machining operation, doubling the cutting…

A:

Q: Identify the machining operation

A:

Q: the ratio of new tool life to original tool life

A: Given, n=0.5 if cutting speed is reduced by 50 % Then find the ratio of new tool life ?

Q: Explain any one of the turning operations in terms of tool shape,tool path, final and generated…

A: Turning operations are carried out in a lathe. A lathe is a machine tool in which the work piece…

Q: This troubleshooting probably occurs in the drilling operation due to high cutting speed,…

A: Option (d) is correct. Excessive drill wear

Q: Broadly define what machining processes are

A: A machining process which are used in the field of mechanical engineering, machining is a process of…

Q: What are the different types of milling and its uses?

A: Milling machine: It has a tool having multiple cutting edge, tool can move in all three…

Q: Classify nontraditional machining (NTM) processes?

A: Non Traditional machining process is a special type of machining process in which there is no direct…

Q: -) With a neat sketch differentiate between counter boring and counter sinking operation.

A: As per bartleby guidelines we are allowed to solve only one question if multiple questions are…

Q: single-point cutting tool with 12° rake angle is used to machine a steel work-piece. The depth of…

A: Given:uncut thickness, t1=0.81 mmchip thickness, t2=1.8

Q: 1) What are the factors that affect the life of the cutting tool in the turning processes.

A: Dear student, we are suppose to solve only one question. Please post other question as a separate…

Q: Define the fundamental of cutting.

A: Definition of Cutting : Cutting is defined as It's process which creates new surfaces in a solid by…

Q: What is the cutting speed? when main axis spindle speed is 700rpm, and external diameter is 15mm ?

A: Given:-N=700 rpmD=15mmTo find:-Cutting speed, Vc

Q: Manufacuring processes List the forces acting on a chip during machining operation?

A: Machining is a process in which a cutting tool is used to remove a material in the form of small…

Q: In a multi point cutting tool the positive rake angle is used to cut low tensile strength and…

A: This question is from manufacturing engineering subject.

Q: 3. What are the important characteristics of a cutting tool material?

A: What are the important characteristics of a cutting tool material ?

Q: List all the failure modes, wear mechanisms and wear conditions for cutting tools

A:

Q: Identify major sources of heat generated in Cutting tool

A: When the cutting tool is used for the machining process then heat is generated through the cutting…

Q: Which one of the given below is/are associated with cemented carbide tools?

A: Which one of the given below is/are associated with cemented carbide tools? Answer: C)All

Q: What is a cutting tool and what are the two basic types of cutting tools in traditional machining?

A:

Q: a Copper during machining produces continuous chips none of these discontinuous chips continuous…

A: a.option A continuous chip is the correct answer.

Automation in manufacturing processes

The term automation refers to the technique through which the creation of an apparatus takes place using an automatic process or a system. Let us try to understand this with an example.