I need the answer as soon as possible Q8/ (9- 99) gas turbine for an automobile is designed with a regenerator. Airenters the compressor of this engine at 100 kPa and 30°C. The compressorpressure ratio is 10; the maximum cycle temperature is 800°C; and the coldair stream leaves the regenerator 10°C cooler than the hot air stream at theinlet of the regenerator. Assuming both the compressor and the turbine to beisentropic, determine the rates of heat addition and rejection for this cyclewhen it produces 115 kW. Use constant specific heats at room temperature.Answers: 258 kW, 143 kW.Heat exchangerCombCompressorTurbine

Answered: Image /qna-images/answer/64320c5e-c583-4596-90b5-fe2f8508a54d.jpg

he compressor of this engine at 100 kPa and 30°C. The compres e ratio is 10; the maximum cycle temperature is 800°C; and the m leaves the regenerator 10°C cooler than the hot air stream at he regenerator. Assuming both the compressor and the turbine to ic, determine the rates of heat addition and rejection for this c produces 115 kW. Use constant specific heats at room temperat s: 258 kW, 143 kW.

he compressor of this engine at 100 kPa and 30°C. The compres e ratio is 10; the maximum cycle temperature is 800°C; and the m leaves the regenerator 10°C cooler than the hot air stream at he regenerator. Assuming both the compressor and the turbine to ic, determine the rates of heat addition and rejection for this c produces 115 kW. Use constant specific heats at room temperat s: 258 kW, 143 kW.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A turbo-charge, 16 cylinder, Vee-type diesel engine has an airconsumption of 3,000 kg/hr per cylinder at rated load and speed. Thisair is drawn in through a filter by a centrifugal compressor directlyconnected to the exhaust gas turbine. The temperature of the air fromthe compressor is 145 C and a counter flow air cooler reduces the air temperature to 45 C before it goes to the engine suction header. Cooling water enters air cooler at 30 C and leaves at 38 C. Calculatethe quantity of cooling water in m3/hr required to cool the total airrequirements of the engine at rated load and speed. (Use AMTD)
A turbo-charge, 16 cylinder, Vee-type diesel engine has an airconsumption of 3,000 kg/hr per cylinder at rated load and speed. Thisair is drawn in through a filter by a centrifugal compressor directlyconnected to the exhaust gas turbine. The temperature of the air fromthe compressor is 145 C and a counter flow air cooler reduces the air temperature to 45 C before it goes to the engine suction header. Cooling water enters air cooler at 30 C and leaves at 38 C. Calculatethe quantity of cooling water in m3/hr required to cool the total airrequirements of the engine at rated load and speed. ( hint: use AMTD)
A large regenerative-type steam turbine is to operate 10 Mpa, 550C and 10kpa terminal states. Stage arrangement is: two velocity compounded stage exhausting at 8 mPa followed by many pressure compounded stage. Construct the steam steam condition line for this turbine.
Air with a pressure of 0.1 MPa and a temperature of 25oC with a flow rate of 5.29 kg/minute enters a three-stage reciprocating piston compressor with intercooler. The air is compressed polytropically (n = 1.3) to reach the pressure of 4 MPa. Calculate: a) The pressure at stage-2 and stage-3 so that the compression work is minimum? b) The compression work in each stage and the total compression work? c) The outlet air temperature from each stage's cylinder? d) The amount of heat transferred to each intercooler? e) How much air is needed for cooling in the intercooler if the allowable maximum temperature changes between the inlet and outlet of the intercooler is 8oC?
Define the Reversible Isothermal Compression
1. The working substance for a Carnot cycle is 8 lb of air. The volume at the beginning of isothermal expansion is 9 ft3 and the pressure is 300 psia. The ratio of expansion during the addition of heat is 2 and the temperature of the cold body is 90°F. Calculate: a. QA b. V3
a turbo-charge 16 cylinder, vee diesel engine has an air consumption of 3000 kg/hr per cylinder at rated load and speed. this air is drawn in through afliter by a centrifugal compressor diresctly connected to the exhaust gas turbine. the temperature of the air from the compressor is 147 C and a counter flow cooler reduces the air temperature to 43 C before it goes to the engine suction header. cooling water enters air cooler at 31 C and leaves at 40 C. calculate the LMTD
An ideal single stage air compressor without clearance takes in air at 105KPa with temperature of 15degC and delivered it at 413KPa after isentropic compression. What is the work done by the compressor in KJ/kg? complete solution tnx.
A spark ignition engine that operates on Otto cycle has a compression ratio of 10. At the beginningof the compression process, air is at 100 kPa and 25 C. 750 kJ/kg of heat is transferred to air duringthe constant-volume heat-addition process. Consider the variation of specific heats withtemperature. (d) Explain the relationship between thermal efficiency (?) and compression ratio (r).(e) Why are high compression ratios not used in spark ignition engines?(f) Determine the pressure and temperature at the end of the heat addition process(g) Determine the net-work output, the thermal efficiency, and the mean effective pressure forthe cycle.
The steam rate to a turbine for variable output is controlled by a throttle valve in the inlet line.Steam is supplied to the throttle valve at 1,700 kPa and 225°C. During a test run, the pressure atthe turbine inlet is 1000 kPa, the exhaust steam at 10 kPa has a quality of 0.95, the steam flowrate is 0.5 kg/s, and the power output of the turbine is 180kW. 1. What are the heat losses from the turbine? 2. What would be the power output if the steam supplied to the throttle valve were expandedisentropically to the final pressure?
A three-stage compressor receives 500 lps of air at 101 kPaa and 27degrees Celcius, anddischarges at 750 kPaa. Determine a) the power required; b) the pressure at eachintercooler; c) the maximum temperature; and d) the heat transferred in each intercooler. e) What is the discharge temperature of a single-stage compressor operating at the sameintake and discharge temperatures?
Consider a cylinder of a gasoline engine at the beginning of the compression cycle, duringwhich a fuel/air mixture (for our purposes mostly composed of nitrogen and oxygen, i.e.an ideal gas of diatomic molecules) at 300 K and 1 bar is compressed down to one-tenthvolume (compression ratio of 10:1). Assume that the compression is rapid so no heatexchange occurs with the environment. Calculate the pressure and the temperature ofthe compressed gas. In a diesel engine, the compression ratios are typically much higher;redo the same calculation with a compression ratio of 20:1.