Haas Company manufactures microchips on a highly automated assembly line. Haas's costing system uses two cost categories, direct materials, and conversion costs. Direct Materials are added at the beginning of the production process. Conversion costs are added evenly throughout the production. Cost Beginning WIP 20,000 Units Direct Materials $126,600 Conversion (35% Complete) $77,150 Started 72,000 Units $604,800 $385,090 Direct Materials Conversion Ending WIP 14,000 Units (60% Complete) Calculate Haas's physical flow of units, equivalent units, cost pequivalent unit and assign costs to Finished Goods and Ending Work-in-Process Inventories using the Weighted Average method of processing costing.
Q: XYZ has provided the following data from its activity-based costing system: Activity Cost Pool Total…
A: Activity rate = Total cost / Total activity Assembly = $228060/18000 = $12.67 per machine hour…
Q: XYZ Co. manufactures three types of remote-control devices: X, Y, and Z.T costing, has identified…
A: Hi student Since there are multiple questions, we will answer only first question.
Q: Star industries manufactures plastic toys. All direct materials are added at the beginning of the…
A: The equivalent units are calculated by multiplying the physical units with the percentage of…
Q: Mirkle Corporation uses the following activity rates from its activity-based costing to assign…
A: Under activity based costing, overhead cost assigned to products on the basis of activity consumed…
Q: Pinnocle Corporation has provided the following data from its activity-based costing system:…
A: Product Margin: There are four main types of profit margin: gross profit margin, which takes into…
Q: Selzik Company makes super-premium cake mixes that go through two processing departments, Blending…
A: Equivalent Units: An equivalent unit of production is an indication of the amount of work done by…
Q: how would I reconcile the total cost of work in process?
A: Compute theEquivalent units:
Q: Haas Company manufactures microchips on a highly automated assembly line. Haas's costing system uses…
A: Computation of Physical units Working: Answer:
Q: Becton Labs, Inc., produces various chemical compounds for industrial use. One compound, called…
A: Standards are set in the beginning, from the standard set the actual performance are required to be…
Q: Becton Labs, Incorporated, produces various chemical compounds for industrial use. One compound,…
A: Solution 1a: Standard quantity of material for actual production = 3500*2.30 = 8050 ounce Actual…
Q: :XYZ has provided the following data from its activity-based costing system Total Activity Total…
A: Formulas; Cost per activity=Total costTotal activity
Q: Becton Labs, Inc., produces various chemical compounds for Industrial use. One compound, called…
A: Standard costing refers to the performance evaluation process where the actual data is compared with…
Q: Tango Company produces and sells two products, Alpha and Zeta. The following information is…
A: Setup cost per unit = Cost per setup / No. of units per setup
Q: Becton Labs, Incorporated, produces various chemical compounds for industrial use. One compound,…
A: The question is based on the concept of Cost Accounting.
Q: Lymwood, Inc. produces two different products (Product A and Product X) using two different…
A: Inspection cost assigned to Product A = no. of batches x inspection cost per batch
Q: Lutz, Inc. produces three products: Quality, Superior, and Superb. The Lutz cost…
A: ABC or Activity based costing is a technique in which various cost divers are used to calculate the…
Q: he Oliver Company manufactures products in two departments: Mixing and Packaging. The company was…
A: Estimated overhead costs/Estimated allocation base = Predetermined OH allocation rate Predetermined…
Q: Reynoso Corporation manufactures titanium and aluminum tennis racquets. Reynoso’s total overhead…
A: Total costs assigned to Titanium rackets = Number of labor hours used in manufacture of titanium…
Q: Vaulker Company produces commercial gardening equipment. Since production is highly automated, the…
A:
Q: Becton Labs, Inc., produces various chemical compounds for industrial use. One compound, called…
A: Note: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question…
Q: Hackers Corp. accumulated the following information for its two products, A and B. Product A Total…
A: The traditional system will allocate set up costs on the basis of direct labor hours and ABC will…
Q: COVID Co. produces two different products (A and X) using two different activities: Machining, which…
A: The correct answer is Option(a).
Q: Becton Labs, Inc., produces various chemical compounds for industrial use. One compound, called…
A: 1: for direct material: a) Material price variance Material price variance=Standard…
Q: Cullumber Inc. manufactures and distributes three types of water skis: beginner, intermediate, and…
A: Overhead expense refers to the expenses that are not directly associated with the production of the…
Q: Ice Cool produces two different models of air conditioners. The activities, costs, and cost drivers…
A: Activity-based costing is a costing approach in which a company's activities are identified and the…
Q: Becton Labs, Inc., produces various chemical compounds for industrial use. One compound, called…
A: The variance is computed by comparing standard cost and actual cost. The standards are settled on…
Q: The Mixing Department of Yummy Foods had 60.000 equivalent units of materials for October. Of the…
A: The production price report. Summarizes the assembly and price activity inside a department for a…
Q: Becton Labs, Inc., produces various chemical compounds for industrial use. One compound, called…
A: In the above question we have given data related to Material, Labor and Manufacturing Overhead of…
Q: Becton Labs, Incorporated, produces various chemical compounds for industrial use. One compound,…
A: Formula used: Direct material price variance=Standard price-Actual price×Actual quantity Direct…
Q: ISQUID Corp. has provided the following data from its activity-based costing system: Activity Cost…
A: The product margin is calculated as difference between sales revenue and different costs incurred…
Q: Lutz, Inc. produces three products: Quality, Superior, and Superb. The Lutz cost…
A: Activity-based costing is commonly known as ABC. It is a costing method that allocates indirect…
Q: The Converting Department of Soft Touch Towel and Tissue Company had 1,080 units in work in process…
A: Answer - Particulars Whole units Direct materialsEquivalent units ConversionEquivalent units…
Q: Becton Labs, Inc., produces various chemical compounds for industrial use. One compound, called…
A: Variance: It is the computation of the differences between the standards and the actual rate, actual…
Q: Becton Labs, Inc., produces various chemical compounds for industrial use. One compound, called…
A: Under standard costing, actual cost is compared with standard cost to identify the variance. Actual…
Q: Venti Chemicals has a Mixing Department and a Refining Department. Its process-costing system in the…
A: Equivalent units of products concept came in to existence when some units are not fully completed at…
Q: Becton Labs, Inc., produces various chemical compounds for industrial use. One compound, called…
A: Formulas used:
Q: Feldpausch Corporation has provided the following data from its activity-based costing system:…
A: Net income: Net income can be ascertained from the statement of profit or loss when the charges are…
Q: XYZ Co. manufactures three types of remote-control devices: X, Y, and Z. The company, which uses…
A: Under activity based costing, the costs are allocated to the activities using various allocation…
Q: Carla Vista Inc. manufactures a single product in a continuous processing environment. All materials…
A: I am answering the first three sub-parts of the question as per bartleby guidelines. Please…
Q: National Inc. manufactures two models of CMD that can be used as cell phones, MPX, and digital…
A: Direct labour High F 12000 units x 19.60 = $235200 Great P 17000 units x 15.20 = $258400 Total…
Q: Becton Labs, Inc., produces varlous chemical compounds for Industrial use. One compound, called…
A: Variable Overhead Rate Variance = ( Standard Rate - Actual Rate) * Actual Hours Variable Overhead…
Q: i cannot figure out how to solve this problem
A: a. Reconciliation of the number of physical units worked on during the period:
Q: Becton Labs, Inc., produces various chemical compounds for industrial use. One compound, called…
A: Note: We’ll answer the first question since the exact one wasn’t specified. Please submit a new…
Q: Lynwood, Inc. produces two different products (Product A and Product X) using two different…
A: Machining cost assigned to product X = No. of machine hours x Machining cost per hour
Q: XYZ has provided the following data from its activity-based costing system: Activity Cost Pool Total…
A: Overhead means the cost incurred indirect in factory for the production of goods. Manufacturing…
Q: Lynwood, Inc. produces two different products (Product A and Product X) using two different…
A: An activity cost driver is a concept that comes under the Activity Based Costing (ABC) system.…
Q: The Mixing Department of Yummy FoodsYummy Foods had 60,000equivalent units of materials for…
A: Total Costs accounted for=Cost of units Competed & Transferred out+Cost of Ending Work in…
Q: Classify each of the following costs as unit-level, batch-level, product-level, or facility-level.
A: Activity-based costing: It is a method that helps in finding the activities performed by a company…
Trending now
This is a popular solution!
Step by step
Solved in 5 steps
- The following product costs are available for Stellis Company on the production of erasers: direct materials, $22,000; direct labor, $35,000; manufacturing overhead, $17,500; selling expenses, $17,600; and administrative expenses; $13,400. What are the prime costs? What are the conversion costs? What is the total product cost? What is the total period cost? If 13,750 equivalent units are produced, what is the equivalent material cost per unit? If 17,500 equivalent units are produced, what is the equivalent conversion cost per unit?K-Briggs Company uses the FIFO method to account for the costs of production. For Crushing, the first processing department, the following equivalent units schedule has been prepared: The cost per equivalent unit for the period was as follows: The cost of beginning work in process was direct materials, 40,000; conversion costs, 30,000. Required: 1. Determine the cost of ending work in process and the cost of goods transferred out. 2. Prepare a physical flow schedule.Medical Tape makes two products: Generic and Label. It estimates it will produce 423,694 units of Generic and 652,200 of Label, and the overhead for each of its cost pools is as follows: It has also estimated the activities for each cost driver as follows: How much is the overhead allocated to each unit of Generic and Label?
- Healthway uses a process-costing system to compute the unit costs of the minerals that it produces. It has three departments: Mixing, Tableting, and Bottling. In Mixing, at the beginning of the process all materials are added and the ingredients for the minerals are measured, sifted, and blended together. The mix is transferred out in gallon containers. The Tableting Department takes the powdered mix and places it in capsules. One gallon of powdered mix converts to 1,600 capsules. After the capsules are filled and polished, they are transferred to Bottling where they are placed in bottles, which are then affixed with a safety seal and a lid and labeled. Each bottle receives 50 capsules. During July, the following results are available for the first two departments (direct materials are added at the beginning in both departments): Overhead in both departments is applied as a percentage of direct labor costs. In the Mixing Department, overhead is 200 percent of direct labor. In the Tableting Department, the overhead rate is 150 percent of direct labor. Required: 1. Prepare a production report for the Mixing Department using the weighted average method. Follow the five steps outlined in the chapter. Round unit cost to three decimal places. 2. Prepare a production report for the Tableting Department. Materials are added at the beginning of the process. Follow the five steps outlined in the chapter. Round unit cost to four decimal places.Wrappers Tape makes two products: Simple and Removable. It estimates it will produce 369,991 units of Simple and 146,100 of Removable, and the overhead for each of its cost pools is as follows: It has also estimated the activities for each cost driver as follows: Â How much is the overhead allocated to each unit of Simple and Removable?Kenkel, Ltd. uses backflush costing to account for its manufacturing costs. The trigger points are the purchase of materials, the completion of goods, and the sale of goods. Prepare journal entries to account for the following: a. Purchased raw materials, on account, 80,000. b. Requisitioned raw materials to production, 80,000. c. Distributed direct labor costs, 10,000. d. Factory overhead costs incurred, 60,000. (Use Various Credits for the account in the credit part of the entry.) e. Completed all of the production started. f. Sold the completed production for 225,000, on account.
- Benson Pharmaceuticals uses a process-costing system to compute the unit costs of the over-the-counter cold remedies that it produces. It has three departments: mixing, encapsulating, and bottling. In mixing, the ingredients for the cold capsules are measured, sifted, and blended (with materials assumed to be uniformly added throughout the process). The mix is transferred out in gallon containers. The encapsulating department takes the powdered mix and places it in capsules (which are necessarily added at the beginning of the process). One gallon of powdered mix converts into 1,500 capsules. After the capsules are filled and polished, they are transferred to bottling, where they are placed in bottles that are then affixed with a safety seal, lid, and label. Each bottle receives 50 capsules. During March, the following results are available for the first two departments: Overhead in both departments is applied as a percentage of direct labor costs. In the mixing department, overhead is 200% of direct labor. In the encapsulating department, the overhead rate is 150% of direct labor. Required: 1. Prepare a production report for the mixing department using the weighted average method. Follow the five steps outlined in the chapter. (Note: Round to two decimal places for the unit cost.) 2. Prepare a production report for the encapsulating department using the weighted average method. Follow the five steps outlined in the chapter. (Note: Round to four decimal places for the unit cost.) 3. CONCEPTUAL CONNECTION Explain why the weighted average method is easier to use than FIFO. Explain when weighted average will give about the same results as FIFO.The following product Costs are available for Haworth Company on the production of chairs: direct materials, $15,500; direct labor, $22.000; manufacturing overhead, $16.500; selling expenses, $6,900; and administrative expenses, $15,200. What are the prime costs? What are the conversion costs? What is the total product cost? What is the total period cost? If 7,750 equivalent units are produced, what is the equivalent material cost per unit? If 22,000 equivalent units are produced, what is the equivalent conversion cost per unit?The Converting Department of Tender Soft Tissue Company uses the weighted average method and had 1,900 units in work in process that were 60% complete at the beginning of the period. During the period, 15,800 units were completed and transferred to the Packing Department. There were 1,200 units in process that were 30% complete at the end of the period. a. Determine the number of whole units to be accounted for and to be assigned costs for the period. b. Determine the number of equivalent units of production for the period. Assume that direct materials are placed in process during production.
- Evans, Inc., has a unit-based costing system. Evanss Miami plant produces 10 different electronic products. The demand for each product is about the same. Although they differ in complexity, each product uses about the same labor time and materials. The plant has used direct labor hours for years to assign overhead to products. To help design engineers understand the assumed cost relationships, the Cost Accounting Department developed the following cost equation. (The equation describes the relationship between total manufacturing costs and direct labor hours; the equation is supported by a coefficient of determination of 60 percent.) Y=5,000,000+30X,whereX=directlaborhours The variable rate of 30 is broken down as follows: Because of competitive pressures, product engineering was given the charge to redesign products to reduce the total cost of manufacturing. Using the above cost relationships, product engineering adopted the strategy of redesigning to reduce direct labor content. As each design was completed, an engineering change order was cut, triggering a series of events such as design approval, vendor selection, bill of materials update, redrawing of schematic, test runs, changes in setup procedures, development of new inspection procedures, and so on. After one year of design changes, the normal volume of direct labor was reduced from 250,000 hours to 200,000 hours, with the same number of products being produced. Although each product differs in its labor content, the redesign efforts reduced the labor content for all products. On average, the labor content per unit of product dropped from 1.25 hours per unit to one hour per unit. Fixed overhead, however, increased from 5,000,000 to 6,600,000 per year. Suppose that a consultant was hired to explain the increase in fixed overhead costs. The consultants study revealed that the 30 per hour rate captured the unit-level variable costs; however, the cost behavior of other activities was quite different. For example, setting up equipment is a step-fixed cost, where each step is 2,000 setup hours, costing 90,000. The study also revealed that the cost of receiving goods is a function of the number of different components. This activity has a variable cost of 2,000 per component type and a fixed cost that follows a step-cost pattern. The step is defined by 20 components with a cost of 50,000 per step. Assume also that the consultant indicated that the design adopted by the engineers increased the demand for setups from 20,000 setup hours to 40,000 setup hours and the number of different components from 100 to 250. The demand for other non-unit-level activities remained unchanged. The consultant also recommended that management take a look at a rejected design for its products. This rejected design increased direct labor content from 250,000 hours to 260,000 hours, decreased the demand for setups from 20,000 hours to 10,000 hours, and decreased the demand for purchasing from 100 component types to 75 component types, while the demand for all other activities remained unchanged. Required: 1. Using normal volume, compute the manufacturing cost per labor hour before the year of design changes. What is the cost per unit of an average product? 2. Using normal volume after the one year of design changes, compute the manufacturing cost per hour. What is the cost per unit of an average product? 3. Before considering the consultants study, what do you think is the most likely explanation for the failure of the design changes to reduce manufacturing costs? Now use the information from the consultants study to explain the increase in the average cost per unit of product. What changes would you suggest to improve Evanss efforts to reduce costs? 4. Explain why the consultant recommended a second look at a rejected design. Provide computational support. What does this tell you about the strategic importance of cost management?Plata Company has identified the following overhead activities, costs, and activity drivers for the coming year: Plata produces two models of microwave ovens with the following activity demands: The companys normal activity is 21,000 machine hours. Calculate the total overhead cost that would be assigned to Model X using an activity-based costing system: a. 230,000 b. 240,000 c. 280,000 d. 190,000Davis Co. uses backflush costing to account for its manufacturing costs. The trigger points are the purchase of materials, the completion of goods, and the sale of goods. Prepare journal entries to account for the following: a. Purchased raw materials, on account, 70,000. b. Requisitioned raw materials to production, 70,000. c. Distributed direct labor costs, 15,000. d. Factory overhead costs incurred, 45,000. (Use Various Credits for the account in the credit part of the entry.) e. Completed all of the production started. f. Sold the completed production for 195,000, on account. (Hint: Use a single account for raw materials and work in process.)