Given soil having particle size distribution of 8% sand, 20% gravel, 48% sit and 24% clay, classify the soll using Textural Classification System/USDA
Q: By referring to USCS table 1 (below), what is the soil type if the results from sieve test show; i.…
A: Less than 5% of soil passing NO 200 sieve it means more than 50% of soil are retained on NO 200…
Q: Discuss geology and engineering properties of black cotton soils under the following: Hydrologic…
A: Once the soil is recognized as a structural material, its relevance is vital in civil engineering.…
Q: Both soil classification systems, AASHTO and Unified (ASTM), are based on the texture and…
A: In AASHTO and Unified (ASTM) soil is mainly divided into two categories namely fine grained and…
Q: Classify the soil sample using USDA Textural Classification System if the sample has the following…
A: Given data, Gravel = 8% Sand = 52% Silt = 28% Clay = 11 % To find out the classification of soil…
Q: A soil has modified percentages for silt and clay which are 43.08% and 26.15%, respectively. (12pts)…
A:
Q: Classify the following soils by the AASHTO classification system. Give the group index for each…
A:
Q: Using AASHTO Classification System, determine the following: (a) Group Index (b) Soil Classification…
A:
Q: Question 7 Classify the following soil using the U.S. Department of Agriculture textural…
A: To Determine Classify the following soil using the U.S. Department of Agriculture textural…
Q: Question 17 Classify the following soil using the U.S. Department of Agriculture textural…
A: Refrence : Us department of Agriculture Firstly draw line for clay which is horizontally then for…
Q: Classify the soil below using USDA textural classification. 1 Particle-Size Distribution (%) Soil…
A: we have to classify the soil according to USDA CLASSIFICATION SYSTEM. Given that, Sand=30%…
Q: The soil has the following particle-size distribution Gravel – 20%, Sand – 10%, Silt, 30%, Clay,…
A: Given data, Gravel = 20% Sand = 10% Silt = 30% Clay = 40 %
Q: Classify the soil using USCS. Justify your statement. Choices: CL (lean clay with gravel) CL (lean…
A: Here to classify soil using USCS
Q: Classify the soil according to ASTM-CS
A: The soil is classified into fine-grain soil or coarse grain soil based on the soil passing through…
Q: Classify the following soil using the U.S. Department of Agriculture textural classification chart.…
A: Sand-20% Silt-20% Clay-60%
Q: Classify the given soils using the Unified Soil Classification System (USCS). Give the group symbols…
A:
Q: 2. Classify the following soil using AASHTO classification system. Description Percent finer than…
A: Solution: As per AASHTO classification system: Soil A: Sieve No. 200 = 38% passing Greater than 35 %…
Q: Classify the soil given below using the Unified Soil Classification System. Percentage passing No. 4…
A: Given Data: Percent Passing No.4 sieve=72 percent Passing No.200 sieve=33 Liquid Limit= WL =35…
Q: Question 8 Classify the following soil using the U.S. Department of Agriculture textural…
A:
Q: Particle Size Classification Name of Organization Grain size (mm) Sand Gravel Silt Clay…
A: 1. According to Massachusetts Institute of Technology (MIT) Gravel = 2 mm to 60 mm Sand = 0.06 mm…
Q: Given a grain-size distribution and Atterburg limits below: Using the AASHTO method, the soil is…
A:
Q: Classify the following soil by the AASHTO classification system. Give the group index. Sieve…
A:
Q: Classify the following soils by the AASHTO classification system Give the group index for each soil.…
A: Note- Since we only answer up to 3 sub-parts, we’ll answer the first3. Please resubmit the question…
Q: Classify the soil sample using the US. Department of Agriculture textural classification chart. Sand…
A:
Q: Soil has the following particle-size distribution Gravel-20%, Sand-10%, Silt-30%, Clay-40%.Classify…
A: Given data, %Gravel = 20 %Sand = 10 %Silt = 30 %Clay = 40 To classify soil using USDA textural…
Q: How to identify grain size distribution of soilExplain how to determine shrinkage limit and specific…
A: GIVEN, THERE ARE MULTIPLE QUESTIONS ARE THERE IN A SINGLE QUESTION. 3 QUESTIONS ARE FROM GEO…
Q: Using the unified classification system, what is the classification of soils that have the following…
A: Unified Soil classification system- Step I Sieve Number 200- If 50% or more soil fraction retained…
Q: Classify the following soil using the U.S. Department of Agriculture textural classification. Sand:…
A: Consider the texture classification graph of soils.
Q: ACTIVITY 3 1. Classify the Soil 1 according to the USDA textural classification system. Soil 1…
A: To find out the soil according to USDA textural classification system.
Q: Classify the following soils by using the USDA's textural classification chart Particle - size…
A: The USDA textural chart is given below:
Q: Provide USCS classification for the soil shown on the GSC below. Your answer must contain the…
A: Given data: Grain size distribution curve:
Q: Describe the grain arrangement of loose granular soil.
A: Various structure arrangement of loose granular soil are :- 1- Single coarse grained structure: -…
Q: Classify Soil C using the following: a) AASHO b) USCS c) USDA if the composition of the soil is: a.…
A:
Q: In accordance with the Unified Soils Classification System, a soil grain having a size greater than…
A: Only sand has size less than 4.75 mm Gravel ,cobble and pebble have size greater than 4.75 mm.…
Q: When soil achieve zero percent air void, this statement could be also defined as
A: Soil is one of the most important building materials. So one needs to find the parameters, the load,…
Q: Describe the Consistency and Strength of Cohesive Soils.
A: Soil consistency is defined as the strength that binds soil materials together, or soil resistance…
Q: Identify the type of soil that contains wide variety of particle sizes ranging from clay to gravel…
A: Note: Since you have asked multiple questions, we will solve the first question for you. If you want…
Q: Classify the following soils using the Unified soil classification system. Give the group symbols…
A:
Q: A soil has the following particle size distribution Gravel = 20% Sand = 10% Silt = 30%mm Clay =…
A: particle-size distribution : The particle-size distribution (PSD) of a powder, granular substance,…
Q: ) Determine the USCS group symbol and group name for soils H through L. Figure 1). All soils are…
A:
Q: Classify the following soil using the U.S. Department of Agriculture textural classification chart.…
A: Given data, ASTM Sieve designation (mm) % Finer 63 93 20 76 6.3 65 2 59 0.600 54…
Q: Given a grain-size distribution and Atterburg limits below: The soil is classified as:
A: Step1:Look at the % passing through sieve no 200=30<50%⇒COARSE GRAINED SOILStep2:Look at the %…
Q: Classify the following soils by AASHTO classification system. Soil Percent finer than (sieve…
A: GIVEN AASHTO soil classification chart. Soil sample 1 and 2 Passing passing through seives of both…
Q: Classify the following soils by the AASHTO classification system
A:
Q: 4. Classify the following soil by the Unified Soil Classification System: Percent passing No.4 sieve…
A: Classifying the soil by referring Unified soil classification system Consider the following…
Q: Classify the soil to be used as a highway subgrade material using AASHTO classification system;…
A:
Q: 1. Do hand drawing of the grain size distribution curves of each soil type and classify them using…
A: Grain size distribution curves are a semi-log plot of the % finer against the size of particles. The…
Q: Classify the soil sample using USDA Textural Classification System if the sample has the following…
A: Given data : % of sand = %Gravel +%Sand = 18+66% =84% %silt=11% %clay=5%
Q: Q2/ Classify the soil with the following properties according to the USCS Dia.(mm) 2.0 0.84 0.42…
A: Given data L.L=40 P.L=15 Draw the chart
Q: With the given data: Gravel = 15%, Sand = 10%, Clay = 35%, Silt = 40 % Classify the soil according…
A:
Given soil having particle size distribution of 8% sand, 20% gravel, 48% sit and 24% clay, classify the soll using Textural Classification System/USDA
Step by step
Solved in 2 steps with 1 images
- Classify the soil sample using USDA Textural Classification System if the sample has the following particle size distribution. Gravel = 18 % Silt = 11 % Sand = 66 % Clay = 5 % O Loamy Sand O sity Loam O Sandy Loam O sity ClayTable 2 British Soil Classification System for Engineering Purposes Soil groups GRAVEL and SAND may be qualified sandy GRAVEL and gravelly SAND. etc., where appropriate Subgroups and laboratory identification Subgroup symbol Fines (% less than 0.06 mm) Group symbol Liquid limit Slightly silty or GW GW clayey GRAVEL G GP GPu GPg O to 5 Silty GRAVEL G-MGWM GPM Clayey GRAVEL G-F G-C GWC GPC 5 to 15 GM GF GC Very silty GRAVEL GML, etc 15 to 35 GCL GCI GCH GCV GCE Very clayey GRAVEL Slightly silty or clayey SAND Sw SW O to 5 SP SPu SPg SWM SPM swc SPC Silty SAND S-M S-F S-C 5 to 15 Clayey SAND Very silty SAND SM SML, ete SF SC 15 to 35 SCL SCI SCH SCV SCE Very clayey SAND MG FG CG Gravelly SILT MLG, etc CLG CIG CHG CVG CÉG Gravelly CLAY 90 MS FS CS Sandy SILT MLS, ete Sandy CLAY CLS, etc SILT (M-SOIL) M F. ML, ete CLAY <35 50 to 70 70 to 90 -90 ORGANIC SOILS Descriptive letter O' suffixed to any group or subgroup symbol Pt PEAT Suos ANIH more than 35% of the material COARSE SOILS less than…Need help. Classify the soil according to the USDA texturalclassification system. The soil has particle size distribution ofGravel – 21%Sand – 12%Silt – 35%Clay – 32%a. Calculate the modified percentage of sand.b. Compute the modified percentage of silt.c. What is the soil classification.
- The soil has the following particle-size distribution Gravel – 20%, Sand – 10%, Silt, 30%, Clay, 40%.Classify according to USDA textural classification system.Question 2 Classify the following soil using the U.S. Department of Agriculture textural classification. Gravel: 10 Sand: 55 Silt: 15 Clay: 20 Blank 1 Blank 1 Add your answerClassify Soil C using the following:a) AASHOb) USCSc) USDA if the composition of the soil is:a. 2% Gravelb. 35% Sandc. 50% Clayd. 13% Silt
- Classify the following soil by USCS classification system by giving the group symbol and the group name. % finer than No. 4: 71 % finer than No. 200: 11 LL: 32 PL: 16 Cu: 4.8 Cc: 2.9 Group Symbol is and the Group Name isSoil classification requires all of the results of the following tests: Liquid limit and Plastic limit tests Atterberg limit and Hydrometer tests Atterberg limit and grain size analysis test Sieve and Hydrometer analysis testsClassify the group name of the soil by USCS using the data given below: Percent passing the #4 sieve 68 Percent passing the #200 sieve 22 Liquid Limit 34 Plastic Limit 17 Group of answer choices a) Poorly graded sand with gravel b) Well-graded sand with gravel c) Silty sand with gravel d) Clayey sand with gravel