Give the expression for the shear force, V = V(x), and the bending moment,M = M(x), as a function of the distance, x, measured from point A.Hint: Find the expressions of shear force and bending moment in each section:AB (0< x <4), BC (4 <x <7) and CD (7< x <10) Problem 1Simply supported beam ABCD carries a linearly distributed load, w(x), and aconcentrated load P as shown in the figure below. Neglect the weight of thebeam.yW₁ = 2 kN/mA Q4 m3 mW₂ = 4 kN/mBс3 mP = 5 kNᎠTĪTĪTX

Given a simply supported beam with loads as shown in the figurethe objective is to determine…

Give the expression for the shear force, V = V(x), and the bending moment, M = M(x), as a function of the distance, x, measured from point A. Hint: Find the expressions of shear force and bending moment in each section: AB (0< x <4), BC (4

Give the expression for the shear force, V = V(x), and the bending moment, M = M(x), as a function of the distance, x, measured from point A. Hint: Find the expressions of shear force and bending moment in each section: AB (0< x <4), BC (4

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.2.1P: A 10-ft rigid bar AB is supported with a vertical translational spring at A and a pin at B. The bar...

See similar textbooks

Related questions

Q: 4 Problem Norm the Niner has a running start when he catches on to the zipline at the top of the…

A: The initial velocity is .The final velocity is .The distance travelled is

Q: Given: Metal Specimen diameter x-sectiion (circular)= 0.55 in Gage Length= 2.030 in Fracture…

Q: 25.18 The following is an initial-value, second-order differential equation: dx ²+(5x) + (x +7) sin…

A: To decompose the given second-order differential equation into a system of first-order differential…

Q: Crank 2 of the pushlink mechanism shown in the figure is driven at a constant angular velocity ω2 =…

A: Find the velocity and acceleration of point D and find the angular velociuty and acceleration of…

Q: The uniform lamina of density 2.2 kg/m2. for a=2.2 m,b=4.8 m,c=8 m,d=8.9 m 1-The x-co-ordinate of…

Q: 1. This arm is attached to a wall on the left. The right end is free hanging. Each section is 1.9m…

Q: An aeroplane was flying horizontally with a velocity of 720 km/h at an altitude of 490 m. When it is…

A: Velocity V=720 km/hAltitude h=490 mTo Find-The horizontal distance by which it missed the target.

Q: Problem 4: Consider the flow field formed by combining a uniform flow in the positive x direction…

A: Given Data:Flow field: Combination of a uniform flow in the positive x direction and a source…

Q: ____ are installed in supply-water piping to prevent water hammer. Bypass valves, air chambers,…

A: Which of the following is installed in supply water piping to prevent water hammer.Water…

Q: section. Calculate the percentage increase in the plastic moment resistance about the y-axis of the…

A: to find:To determine the percentage increase in the simply supported beamgiven:the dimension of the…

Q: A circular shock absorber, as shown in the figure below, is designed to support a set of sensitive…

A: Force applied (F): 1500 NDiameter of aluminum circular bar (d1): 5 mmDiameter of hollow circular…

Q: Moment of Inertia about the X-axis Use three (3) decimal places, neglect small curves and fillets…

A: Given Data

Q: So , What we found in section B is the absolute pressure? Since most of the time when using…

A: Absolute pressure-When we take into account the atmospheric pressure we obtain the absolute…

Q: n the realm of mechanical engineering, how do advances in material science, especially in the…

A: Material science plays a pivotal role in mechanical engineering, especially in the development and…

Q: A car weighs 2200 lb and is travelling 100 mi/h on a race track that is on a 3% upgrade. The car is…

A: The objective is to determine maximum car acceleration.

Q: Sparky is experimenting with using different fluids in a duct. Based on helium as the working fluid…

A: NOTE :since ,they mentioned normal shock conditions , i have used those formulas related to normal…

Q: n the field of mechanical engineering, how do the principles of thermodynamics and heat transfer…

A: Thermodynamics is the branch of physics that deals with the relationship between heat, work, and…

Q: Question 8 Determine the magnitude of the resultant force. Use F1 = 450 lb, F2 = 150 lb, 81 = 11°,…

Q: Draw the shear and bending moment diagrams for the beam and loading as shown in Fig. 4, and…

Q: Which one of these is NOT a technique that could help a researcher generate some ideas for business…

A: We need to find which option is not useful for the researcher to generate some ideas for business…

Q: blank are installed in supply-water piping to prevent water hammer. Bypass valves, air chambers,…

A: Which of the following is installed in supply water piping to prevent water hammer.Water…

Q: if the coefficient of friction for the site contact surfaces is μ=0.2, determine the magnitude of…

Q: How does the Navier-Stokes equation encapsulate the complexities of fluid behavior, and what…

A: The Navier-Stokes equation is a fundamental equation in fluid mechanics that describes the motion of…

Q: - Establish on the left view, the layout of the intersection curves - cylindrical bores 1 and 2. -…

A: Given DataCylindrical bores 1 and 2.Cylindrical surfaces 3 and 4.FindEstablish on the left view, the…

Q: What will be the cross-sectional area in mm² of the prismatical bar of length 5 mm and weight per…

Q: For the beam and load shown, determine the deflection at point D.

Q: A sign hangs from a wall, as shown. The upper left corner is supported by a pin joint, firmly…

Q: A steam power plant operates on an ideal Rankine cycle with two stages of reheat and has a net power…

A: Assumption :steam considered as saturated vapor at each turbine exitGiven data Ideal reheat rankine…

Q: 7-118 Refrigerant-134a is throttled from 900 kPa and 35°C to 200 kPa. Heat is lost from the…

A: Given the question thatLet p1 be the pressure at the entry position = 900 kpaLet p2 be the pressure…

Q: Problem 2: A two-dimensional ideal flow occurs in a vertical plane. Data are as follows: r = 7 m, b…

Q: Determine the total summation of the y-component surface forces generated by the fluid in unit of…

A: Given data:Velocity in section 1 (V1) = 4.3i ft/sAbsolute pressure in section 1 (P1abs) = 32 psiArea…

Q: The uniform lamina of density 2.2 kg/m2. for a=2.2 m,b=4.8 m,c=8 m,d=8.9 m, 1- x-co-ordinate of…

Q: An engineer designing a light aircraft is trying to make an estimate of the radius of the propeller…

Q: Fluid Mechanics & Machinery Q-5b A fluid has specific gravity of 0.9. What is the value of specific…

A: The specific gravity of fluid S = 0.9To Find-The value of the specific weight.(Take g = 10 m/s2)

Q: The figure shows a part of a machine used to crush recycled cans. Link ABC is attached to the ground…

Q: The cantilever beam is a 300mm long carbono steel bar, with a diameter of 25mm. And it is charged by…

A: The load applied is .The diameter of beam is .The length of beam is .

Q: A three-point bending test was performed on an aluminum oxide specimen having a circular cross…

Q: Water is pumped through a pipeline to a height of 10 m at the rate of 0.1 m³/s, friction and other…

A: Pumping height H=10 mTotal head loss hf=5 mRate of flow Q=0.1 m3/sUnit Weight of Water To Find-The…

Q: A sample of poly(1,4-phenylene sulphide) (PPS) is known to have a glass transition temperature of…

A: Given:A sample of poly(1,4-phenylene sulphide) (PPS) Glass transition temperature of 89°C, A…

Q: Rod AB is attached to the rotating arm using ball-and-socket joints as shown in (Figure 1). AC is…

Q: 24 m 24 m 2.4m P F Q B 4.5 m C E G

A: Given:To find:1- The force in member AB.2- The force in member BD.3- The force in member BE.

Q: A “swing ride” is shown in the figure. For b=2.2 m , L=5 m and θ=41o ,neglect the mass of the cables…

A: Given-b=2.2 m L=5 m θ=41o Mass of (chair + person) m=25 kgTo Find-1.Radius of horizontal circle…

Q: 2) An object with a mass of m = 50 kg is suspended, as shown. What are the reactions (external and…

Q: A B IB В ФО P

A: Given:1-The initial angular velocity of disk B is v0, let v0=w0 2-The mass of the disk A is mA.3-The…

Q: Consider a fully reversible cycle consisting of isentropic compression, isothermal heat addition,…

Q: Question 6 The uniform solid cylinder shown in the figure is released from rest on the = 60 degree…

Q: What are the key principles behind the design and analysis of mechanical systems, and how do they…

A: Mechanical systems encompass a vast array of devices, tools, and machinery that harness various…

Q: 4. Two reservoirs, A and B, are connected by a pipeline which is 1300 m long. The surface of…

A: Given data:Length of pipeline L = 1300 mHeight of reservoir A above B, Δh = 10 mDiameter of pipe D =…

Q: A linearized model for the water level in a system of two interconnected water tanks is 2 * = [ -1…

A: a)Take Laplace transformNowTake Laplace transform

Q: A group of athletes were tested for isometric endurance by measuring the length of time they could…

Question

Give the expression for the shear force, V = V(x), and the bending moment,
M = M(x), as a function of the distance, x, measured from point A.
Hint: Find the expressions of shear force and bending moment in each section:
AB (0< x <4), BC (4 <x <7) and CD (7< x <10)

Problem 1
Simply supported beam ABCD carries a linearly distributed load, w(x), and a
concentrated load P as shown in the figure below. Neglect the weight of the
beam.
y
W₁ = 2 kN/m
A Q
4 m
3 m
W₂ = 4 kN/m
B
с
3 m
P = 5 kN
Ꭰ
TĪTĪT
X

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Given data

VIEW

Step 2: Determining reaction forces

VIEW

Step 3: Determining shear force equation and bending moment equations :

VIEW

Solution

VIEW

Step by step

Solved in 4 steps with 11 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

B cams AB and CDE are connected using rigid link DB with hinges (or moment releases) at ends D and B (see figure a). Beam AB is fixed at joint A and beam CDE is pin-supported at joint E. Load P = 150 lb is applied at C\ Calculate the deflections of joints B and joint C Assume L = 9 ft and EI = 127,000 kip-in2. Repeat part (a) if rigid link DB is replaced by a linear spring with k = 20 kips/in (see figure b).
-4-4 A cantilever beam is supported at B by cable BC. The beam carries a uniform load q = 200 N/M. If the length of the beam is L = 3 m, find the force in the cable and the reactions at A. Ignore the axial flexibility of the cable.
A steel post (E=30×106) having thickness t = 1/8 in. and height L = 72 in. support a stop sign (see figure), where s = 12.5 in. The height of the post L is measured from the base to the centroid of the sign. The stop sign is subjected to wind pressure p = 20 lb/ft2 normal to its surface. Assume that the post is fixed at its base. What is the resultant load on the sign? (Sec Appendix E, Case 25, for properties of an octagon, n =8.) What is the maximum bending stress in the post? Repeat part (b) if the circular cut-outs arc eliminated over the height of the post.
Segments AB and BCD of beam ABCD are pin connected at x = 10 ft. The beam is supported by a pin support at A and roller supports at C and D; the roller at D is rotated by 30* from the x axis (see figure). A trapezoidal distributed load on BC varies in intensity from 5 lb/ft at B to 2.5 lb/ft at C. A concentrated moment is applied at joint A, and a 40-lb inclined load is applied at the mid-span or CD. (a) Find reactions at supports A, C, and D. (b) Find the resultant force in the pin connection at B. (c) Repeat parts (a) and (b) if a rotational spring(kr= 50 ft-lb/radian ) is added at A and the roller at C is removed.
Solve the preceding problem for a W 250 × 89 steel column having a length L = 10 m. Let E = 200 GPa.
Two pipe columns (AB, FC) are pin-connected to a rigid beam (BCD), as shown in the figure. Each pipe column has a modulus of E, but heights (L1or L2) and outer diameters (d1or different for each column. Assume the inner diameter of each column is 3/4 of outer diameter. Uniformly distributed downward load q = 2PIL is applied over a distance of 3L/4 along BC, and concentrated load PIA is applied downward at D. (a) Derive a formula for the displacement
Solve the preceding problem using the following data: beam cross section is 100 x 150 mm, length is 3 m, and point load is P = 5 kN at mid-span, Point C is located 25 mm below the top of the beam and 0.5 m to the right of support A.
A heavy object of weight W is dropped onto the midpoint of a simple beam AB from a height h (see figure). Obtain a formula for the maximum bending stress ^ma* due to tne filing weight in terms of h, st, and 5st, where it is the maximum bending stress and Sstis the deflection at the midpoint when the weight W acts on the beam as a statically applied load. Plot a graph of the ratio o"max/ö"it (that is, the ratio of the dynamic stress to the static stress) versus the ratio iifS^r(Let h/S^ vary from 0 to 10.)
A T-frame structure is torn posed of a prismatic beam ABC and a nonprismatic column DBF. The beam and the column have a pin support at .A and D, respectively. Both members are connected with a pin at B. The lengths and properties of the members are shown in the figure. Find the vertical displacement of the column at points F and B. Plot axial force (AFD) and axial displacement (ADD) diagrams For column DBF.
A fixed-end beam is loaded by a uniform load q = 15 kN/m and a point load P = 30 kN at mid-span. The beam has a length of 4 m and modulus of elasticity of 205 GPa. Find reactions at A and B. Calculate the height of the beam if the displacement at mid-span is known to be 3 mm. Assume that the beam has rectangular cross section with h/b = 2.
Repeat Problem 11.3-9. Use two C 150 × 12.2 steel shapes and assume that E = 205 GPa and L = 6 m.
A large precast concrete panel for a warehouse is raised using two sets of cables at two lift lines, as shown in the figure part a. Cable 1 has a length L1 = 22 Ft, cable 2 has a length L2= 10 ft, and the distance along the panel between lift points Band D is d = 14 ft (see figure part b). The total weight of the panel is W = 85 kips. Assuming the cable lift Forces F at each lift line are about equal, use the simplified model of one half of the panel in figure part b to perform your analysis for the lift position shown. Find the required cross-sectional area AC of the cable if its breaking stress is 91 ksi and a factor of safety of 4 with respect to failure is desired.