full forming P= 52 kN axial force acts on the part shaped by the machining method made of xCy steel material. The thickness of the part is t= 20 mm and the steel tensile strength is sigma(tensile) = 620 MPa . Calculate the individual fatigue life of the A and B sections of the machine part for 99% reliability. Draw logarithmic S_N diagrams(A section diagram and b section diagram). (P=52 kN),(sigma(tensile)=620MPa) (reliability=%99) NOTE: RELİABİLİTY İS 99,NOT 90.PLEASE TAKE THE 99 VALUE,AND DRAW GRAPHİC A AND GRAPHİC B.
Design Against Fluctuating Loads
Machine elements are subjected to varieties of loads, some components are subjected to static loads, while some machine components are subjected to fluctuating loads, whose load magnitude tends to fluctuate. The components of a machine, when rotating at a high speed, are subjected to a high degree of load, which fluctuates from a high value to a low value. For the machine elements under the action of static loads, static failure theories are applied to know the safe and hazardous working conditions and regions. However, most of the machine elements are subjected to variable or fluctuating stresses, due to the nature of load that fluctuates from high magnitude to low magnitude. Also, the nature of the loads is repetitive. For instance, shafts, bearings, cams and followers, and so on.
Design Against Fluctuating Load
Stress is defined as force per unit area. When there is localization of huge stresses in mechanical components, due to irregularities present in components and sudden changes in cross-section is known as stress concentration. For example, groves, keyways, screw threads, oil holes, splines etc. are irregularities.
A full forming P= 52 kN axial force acts on the part shaped by the machining method made of xCy steel material. The thickness of the part is t= 20 mm and the steel tensile strength is sigma(tensile) = 620 MPa . Calculate the individual fatigue life of the A and B sections of the machine part for 99% reliability. Draw logarithmic S_N diagrams(A section diagram and b section diagram).
(P=52 kN),(sigma(tensile)=620MPa) (reliability=%99)
NOTE: RELİABİLİTY İS 99,NOT 90.PLEASE TAKE THE 99 VALUE,AND DRAW GRAPHİC A AND GRAPHİC B.
Step by step
Solved in 2 steps with 3 images
