Find the Ce and the "apparent" OCR for a superficial clay stratum that is 4m thick. The water is at the surface. A sample of the clay has a water content of 27.9%, and a specific gravity of 2.65. An oedometer test showed the following results: Voids Ratio 0.736 0.733 0.73 0.675 0.638 0.6 Vertical Effective Stress 15 28 60 230 480 930

Find the Ce and the "apparent" OCR for a superficial clay stratum that is 4m thick. The water is at the surface. A sample of the clay has a water content of 27.9%, and a specific gravity of 2.65. An oedometer test showed the following results: Voids Ratio 0.736 0.733 0.73 0.675 0.638 0.6 Vertical Effective Stress 15 28 60 230 480 930

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter12: Shear Strength Of Soil

Section: Chapter Questions

Problem 12.19P

See similar textbooks

Similar questions

A triaxial shear test was performed on a well-drained sand sample. The normal stress on the failure plane and the shear stress on the failure plane, at failure were determined to be 6100 psf and 4600 psf, respectively. a. Determine the angle of internal friction of the sand? b. Determine the angle of the failure plane? c. Determine the maximum principal stress? Please answer this asap. For upvote. Thank you very much
Question 3 The results of two consolidated-drained test triaxial tests on a clay are given below: Specimen No. Chamber Pressure Deviator Stress 220 400 105 II 210 1. Determine the angle of internal friction. 2. Determine the cohesion of the clay. 3. Determine the normal stress on the point on the failure plane of the 2"d specimen. O Question 1: A. 26.744 O Question 1: B. 26.042 O Question 1: C. 27.871 O Question 1: D. 27.486 O Question 2: A. 10.737 O Question 2: B. 12.141 O Question 2: C. 17.372 O Question 2: D. 14.836 O Question 3: A. 317.694 O Question 3: B. 232.575 O Question 3: C. 230.306 O Question 3: D. 322.194 O O O O O O O CO
A series of previous CD tests conducted on a NC clay has established that the ultimate effective friction angle of the clay is 300. Now a CU test is conducted on this soil with an effective cell pressure of 100 kPa. The specimen fails at a deviatoric stress of 100 kPa. Estimate the pore pressure at failure. Given: σ3f′=Kaσ1f′whereKa=1−sin⁡ϕ1+sin⁡ϕ Please do fast .... ASAP Fast
A dilatometer test was conducted in a clay deposit. The groundwater table was located at a depth of 3 m below the surface. At a depth of 8 m below the surface, the contact pressure was and the expansion stress was 350 kN/m2Determine the following:a. Coefficient of at-rest earth pressure,b. Overconsolidation ratio, OCRc. Modulus of elasticity,Assume stress at a depth of 8 m to be and 95 kN/m2 , poisson ratio=0.35.
In a tri-axial test of a silty soil, the sample failed at normal stress of 475 kPa and a shear stress of 350 kPa. 1. Which of the following gives the angle of internal friction. 2. Compute the angle that the failure plane makes with the x-axis 3. Compute the maximum failure stress
A dilatometer test was conducted in a clay deposit. The groundwater table was locatedat a depth of 3 m below the surface. At a depth of 8 m below the surface, the contact pressure spod was 280 kN/m2 and the expansion stress sp1d was 350 kN/m2. Determinethe following:a. Coefficient of at-rest earth pressure, Kob. Overconsolidation ratio, OCRc. Modulus of elasticity, EsAssume s 9o at a depth of 8 m to be 95 kN/m2 and ms 5 0.35.
Question 42 The results of two consolidated-drained test triaxial tests on a clay are given below: Specimen No. Chamber Pressure Deviator Stress 105 220 210 400 1. Determine the angle of internal friction. 2. Determine the cohesion of the clay. 3. Determine the normal stress on the point on the failure plane of the 2nd specimen. Question 1: A. 26.744 O Question 1: B. 26.042 Question 1: C. 27.871 O Question 1: D. 27.486 Question 2: A. 10.737 O Question 2: B. 12.141 Question 2: C. 17.372 Question 2: D. 14.836 Question 3: A. 317.694 O Question 3: B. 232.575 Question 3: C. 230.306 O Question 3: D. 322.194
A consolidated-undrained triaxial test was conducted on a saturated, normally consolidated clay. The test results areσ3 = 13 lb/in2σ1(failure) = 32 lb/in2Pore pressure at failure = u = 5.5 lb/in2. Determine c, Φ, c', and Φ'.
A series of previous tests has established that the ultimate effective friction angle of a NC clayey soil is 19.2°. If a CD test is now performed on this soil with a cell pressure of 105 kPa, what would be deviator stress at failure? Given: o3 = Kao, where Ka 1-sin o' 1+sin o'
A consolidated-undrained triaxial compression test was performed on a normalconsolidated clay sample. During the experiment, the confining pressure was 140 kPa, thedeviator stress was 125 kPa, and the pore water pressure was 75 kPa at the time of failure.According to the information given:i- Find the consolidated-undrained internal friction angle of the clay. ii- Find the drained friction angle of the clay
A consolidated undrained triaxial test was performed on a normally consolidated clay with a critical state friction angle of 230. After an initial isotropic consolidation at a cell pressure of 50 kPa, drainage was turned off, the cell pressure was increased to 85 kPa, and the sample was loaded to ultimate conditions. A pore pressure of 55 kPa was measured at ultimate state. What value of major principal total stress was measured at the ultimate state?
2. A triaxial shear test was performed on a well-drained sand sample. The normal stress on the failure plane and the shear stress on the failure plane, at failure was determined to be 6,300 psf and 4,200 psf, respectively. a. Determine the angle of internal friction of the sand. b. Determine the angle of failure plane. c. Determine the maximum principal stress.