Example 29.2. A separately excited D.C. generator has armature circuit resistance of 0.1 ohmand the total brush-drop is 2 1. When running at 1000 r.p.m., it delivers a current of 100 A at 250 Tto a load of constant resistance. If the generator speed drop to 700 r.p.m., with field-currentered, find the current delivered to load.unal-(AMIE, Electrical Machines, 2001)

In this question we need to find a load current when generator running at 700 rpm

Example 29.2. A separately excited D.C. generator has armature circuit resistance of 0.1 ohm and the total brush-drop is 2 1. When running at 1000 r.p.m., it delivers a current of 100 A at 250 to a load of constant resistance. If the generator speed drop to 700 r.p.m., with field-current unal- ered, find the current delivered to load. (AMIE, Electrical Machines, 2001)

Example 29.2. A separately excited D.C. generator has armature circuit resistance of 0.1 ohm and the total brush-drop is 2 1. When running at 1000 r.p.m., it delivers a current of 100 A at 250 to a load of constant resistance. If the generator speed drop to 700 r.p.m., with field-current unal- ered, find the current delivered to load. (AMIE, Electrical Machines, 2001)

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

1)
A separately excited D.C. generator has armature circuit resistance of 0.15 . When running at 900 r.p.m., it delivers a current of 95 A at 200 V to a load of constant resistance. A) If the generator speed drop to 800 r.p.m., with field-current unaltered, find the current delivered to load. B)With what load resistance will the current be 95 amp, at 800 r.p.m.?
The armature of a 14 pole DC shunt generator has 60 slots and is lap wound with 13 conductors per slots. The generator is running at a speed of 630 rpm and supplies a resistive load of 16 ohms at a terminal voltage of 310V. The armature resistance is 0.5 ohms and field resistance is 60 ohms. Find the armature current, the generated EMF and the flux per pole.
7. show the solution and draw a figure
Please solve this problem step by step and illustrate your answer properly. Write your answer in a piece of paper please. Box the final answer.
short shunt compound generator delivers a load current of 10A at 200V and has a shunt field resistance 200 ohms. The shunt field current of 2A. Then armature delivers a current of a.10A b.8A c.11A d.12A
4. A shunt generator has a full load current of 196 A at 220 V. The stray losses are 900W and the shunt field coil resistance is 75N. If it has a full load efficiency of 90%, find the armature resistance.
Two separately excited DC generators are connected in parallel to supply a total loed of 300 A The two generators have the following paraneters: GI R. - 0,250 and induced E.M.F-220 v G2 R = 0.32 and induced E.M.F-250 V Find Mathematicall: (1) The armature current of euch generator, The bus-bar voltage, (ii) The power shuring by each generator, (ii) Repeat (i) and (ii) if the load current decreases to 100A.
An example of a universal building block is: Select one: A. OR gate B. AND gate
i need the answer quickly
A long-shunt compound generator delivers 80 A at 250 V and has the following armature, series field and shunt field resistances of 0.04 ohm, 0.036 ohm and 65 ohms. Considering 1 volt per brush contact drop, calculate the generated voltage.
Q/ dc shunt generator 4 pole with 500 condcutor , wave running at speed 1000 r.p.m the resistance of armature and field are 0.02 , 55 ohm and delivering load 43.12kwatt at terminal voltage 220 volt, the iron losses is 750 watt 1-Torque developed by the prime mover .........and The torque developed by the armature ........... when running at 1000 r.p.m * 2-The load current ,,,,,,,,,,,,when the speed drops to 800 r.p.m. if If is unchanged ? * 3-Output of the prime motor…….kwatt * 4-Mechanical , electrical and overall efficiency …….. * 5-Flux per pole is......... wb *