please solve this a , b , c ,d ... A single phase transformer is given:SN=S, 100 kVA, V = 10 kV, t = 25.=1NThe short circuit parameters reported to primary are:R = 25 02,X = 40 22.SCSCNeglecting the no load parameters of the machine, evaluate:a) the no-load secondary voltage V20Vb) The voltage at the load terminals, when the load absorbs a current equal to80% of the secondary rated current, with power factor cosp = 0.9Vc) The power absorbed during the short circuit test PP =SCSCd) The fault current on primary side in case of fault at the secondary terminalsk20SOLW4

Answered: Image /qna-images/answer/0667876b-15e9-4dcc-af6d-233931c6baf8.jpg

A single phase transformer is given: SN= = 100 kVA, V₁10 kV t = 25. The short circuit parameters reported to primary are: R = 2502, X = 40 2 SC SC Neglecting the no load parameters of the machine, evaluate: a) the no-load secondary voltage V 20 V 20 b) The voltage at the load terminals, when the load absorbs a current equal to 80% of the secondary rated current, with power factor cosp = 0.9 V₂ Colla c) The power absorbed during the short circuit test P P = SC W SC V L

A single phase transformer is given: SN= = 100 kVA, V₁10 kV t = 25. The short circuit parameters reported to primary are: R = 2502, X = 40 2 SC SC Neglecting the no load parameters of the machine, evaluate: a) the no-load secondary voltage V 20 V 20 b) The voltage at the load terminals, when the load absorbs a current equal to 80% of the secondary rated current, with power factor cosp = 0.9 V₂ Colla c) The power absorbed during the short circuit test P P = SC W SC V L

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter3: Power Transformers

Section: Chapter Questions

Problem 3.9P

See similar textbooks

Similar questions

An ideal transformer has no real or reactive power loss. (a) True (b) False
In developing per-unit circuits of systems such as the one shown in Figure 3.10. when moving across a transformer, the voltage base is changed in proportion to the transformer voltage ratings. (a) True (b) False
The ideal transformer windings are eliminated from the per-unit equivalent circuit of a transformer. (a) True (b) False
For an ideal 2-winding transformer, the ampere-turns of the primary winding, N1I1 is equal to the ampere-turns of the secondary winding, N2I2 (a) True (b) False
A single-phase, 50-kVA,2400/240-V,60-Hz distribution transformer has the following parameters: Resistance of the 2400-V winding: R1=0.75 Resistance of the 240-V winding: R2=0.0075 Leakage reactance of the 2400-V winding: X1=1.0 Leakage reactance of the 240-V winding: X2=0.01 Exciting admittance on the 240-V side =0.003j0.02S (a) Draw the equivalent circuit referred to the high-voltage side of the transformer. (b) Draw the equivalent circuit referred to the low-voltage side of the transformer. Show the numerical values of impedances on the equivalent circuits.
Consider the three single-phase two-winding transformers shown in Figure 3.37. The high-voltage windings are connected in Y. (a) For the low-voltage side, connect the windings in , place the polarity marks, and label the terminals a, b, and c in accordance with the American standard. (b) Relabel the terminals a, b, and c such that VAN is 90 out of phase with Va for positive sequence.
Rework Problem 3.14 if the transformer is delivering rated load at rated secondary voltage and at (a) unity power factor, (b) 0.8 power factor leading. Compare the results with those of Problem 3.14. -
The direct electrical connection of the windings allows transient over voltages to pass through the auto transfonner more easily, and that is an important disadvantage of the autotransformer. (a) True (b) False
The ratings of a three-phase three-winding transformer are Primary(1): Y connected 66kV,15MVA Secondary (2): Y connected, 13.2kV,10MVA Tertiary (3): A connected, 2.3kV,5MVA Neglecting winding resistances and exciting current, the per-unit leakage reactances are X12=0.08 on a 15-MVA,66-kV base X13=0.10 on a 15-MVA,66-kV base X23=0.09 on a 10-MVA,13.2-kV base (a) Determine the per-unit reactances X1,X2,X3 of the equivalent circuit on a 15-MVA,66-kV base at the primary terminals. (b) Purely resistive loads of 7.5 MW at 13.2 kV and 5 MW at 2.3kV are connected to the secondary and tertiary sides of the transformer, respectively. Draw the per- unit impedance diagram, showing the per-unit impedances on a 15-MVA,66-kV base at the primary terminals.
Consider Figure 3.4. For an ideal phase-shifting transformer, the imda nce is unchanged when it is referred from one side to the other. (a) True (b) False
Three single-phase, two-winding transformers, each rated 450MVA,20kV/288.7kV, with leakage reactance Xeq=0.10perunit, are connected to form a three-phase bank. The high-voltage windings are connected in Y with a solidly grounded neutral. Draw the per-unit equivalent circuit if the low-voltage windings are connected (a) in with American standard phase shift or (b) in Y with an open neutral. Use the transformer ratings as base quantities. Winding resistances and exciting current are neglected.
A 23/230-kV step-up transformer feeds a three-phase transmission line, which in turn supplies a 150-MVA,0.8 lagging power factor load through a step-down 230/23-kV transformer. The impedance of the line and transformers at 230kVis18+j60. Determine the tap setting for each transformer to maintain the voltage at the load at 23 kV.