Dr Code is pulling a steel sledge uphill along a smooth ramp at 25.00°. The Ramp has magnets underneath which exert an attractive force of F magnet 1000.0 Newtons on the steel. The sledge is piled high with tiny gold bars. The combined mass of steel sledge and gold is 248.0 kg. The coefficient of dynamic (moving) friction is 0.2500 and the uphill tension in the rope is 4133.0 Newtons (because Dr Code is pulling on the rope). Hint: N # mgcose a) Draw a free body diagram (FBD) showing the 5 forces acting on the sledge b) Write out the equations c) Find the acceleration of the sledge in m/s? (be sure to include direction such as up the ramp, down the ramp, or static). JUUUUUUU

Dr Code is pulling a steel sledge uphill along a smooth ramp at 25.00°. The Ramp has magnets underneath which exert an attractive force of F magnet 1000.0 Newtons on the steel. The sledge is piled high with tiny gold bars. The combined mass of steel sledge and gold is 248.0 kg. The coefficient of dynamic (moving) friction is 0.2500 and the uphill tension in the rope is 4133.0 Newtons (because Dr Code is pulling on the rope). Hint: N # mgcose a) Draw a free body diagram (FBD) showing the 5 forces acting on the sledge b) Write out the equations c) Find the acceleration of the sledge in m/s? (be sure to include direction such as up the ramp, down the ramp, or static). JUUUUUUU

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

A 4 kg block is sliding down a vertical wall while being pushed by an external force as shown in the figure. What magnitude of the external force (in N) would be required for the block to move down the wall at constant speed if the coefficient of kinetic friction between the wall and the block is u = 0.20? 4 kg 六F 300 36.98
If a 93kg man plans to tow a 103000kg airplane along a runway by pulling horizontally on a cable attached to it. Suppose that he instead attempts the feat by pulling the cable at an angle of 8.5 degrees above the horizontal. the coefficient of static friction between his shoes and the runway is 0.95. what is the greatest acceleration the man can give the airplane? assume that the airplane is on wheels that turn without any frictional resistance.
A bulldozer drags a 252 kg long along the rough horizontal ground. The cable attached to the log applies a 525 N force at an angle of 30.0 degrees above the ground. The coefficient of kinetic friction between the log and the ground is 0.150. Assume the direction of motion is +x and upwards is +y. What is the normal force acting on the log? What kinetic friction force is acting on the log? (With proper sign) What is the acceleration of the log?
A stone has a mass of 8.79 g and is wedged into the tread of an automobile tire, as the drawing shows. The coefficient of static friction between the stone and each side of the tread channel is 0.818. When the tire surface is rotating at 10.9m/s, the stone flies out the tread. The magnitude FN of the normal force that each side of the tread channel exerts on the stone is 2.46 N. Assume that only static friction supplies the centripetal force, and determines the radius r of the tire (in terms of m)
A 5.0 g coin is placed 15 cm from the center of a turntable. The coin has static and kinetic coefficients of friction with the turntable surface of μs = 0.70 and μk = 0.50. The turntable very slowly speeds up. What is the frequency of the rotation of the turntable expressed in revolutions per minute when the coin slides off? Express your answer in revolutions per minute.
A 30 kg object is moving in uniform circular motion with a radius of 10 m. It takes the object 2 s to make one complete revolution. Find the net force acting on the object.
A 6.0 x 102 kg car is moving around a circular track that has a radius of 1.00 x 102 m at 20. m/s. How much frictional force is required to keep the car from skidding.
A box is at rest on a floor. The box has a mass of 35.0 kg. A force P = 213.0 N is acting to the left at an angle = 31.5° above the horizontal as shown in the figure provided on the right. Between the box and the floor, the coefficient of static friction is Hs = 0.830 and the coefficient of kinetic friction is HK = 0.778. What is the magnitude of the normal force acting on the box? P 0 m
A girl is sledding down a slope that is inclined at 30.0° with respect to the horizontal. The wind is aiding the motion by providing a steady force of 110. N that is parallel to the motion of the sled. The combined mass of the girl and the sled is 73.0 kg, and the coefficient of kinetic friction between the snow and the runners of the sled is 0.190. How much time is required for the sled to travel down a 197-m slope, starting from rest? MO Units
ment Chapter 05, Problem 007 There are two forces on the 1.82 kg box in the overhead view of the figure but only one is shown. For F, = 20.0 N, a = 13.5 m/s², and 0 = 21.5°, find the second force (a) in unit-vector notation and as (b) a magnitude and (c) a direction. (State the direction as a negative angle measured from the +x direction.) (a) Number i + jUnits (b) Number Units (c) Number Units Click if you would like to Show Work for this question: Open Show Work SUBMIT ANSWER SAVE FOR LATER Question Attempts: 0 of 10 used
A 770 kg car, with a 95 kg driver, is driving up a shallow hill of angle theta = 5 degrees directly into a strong headwind. The headwind exerts a force 200 N on the car. The coefficient of rolling friction for the car on the road is 0.025. What force must the car’s engine produce so that it travels at a constant velocity of 10 m/s.
A block is pressed against a vertical wall by a force F, as the drawing shows. F This force can either push the block upward at a constant velocity or allow it to slide downward at a constant velocity. The magnitude of the force is different in the two cases, while the directional angle e is the same. Kinetic friction exists between the block and the wall, and the coefficient of kinetic friction is 0.300. The weight of the block is 57.0 N, and the directional angle for the force F is 0 = 35.0°. Determine the magnitude of when the block slides (a) up the wall and (b) down the wall. (a) P= i (b) P= i