Show the full solution. АCTIVITYDining tables are made up mostly of a wooden frame and a table top by a manufacturer. Table lists thevarious materials used to make the tables, as well as their costs.Description of the itemQuantityCostWood for frame and legs0.1 m3Php 8,200.00/mWooden table top withmica finish1Php 2,100.00Leg bushes4Php 10.00/ bushNails100gPhp 200.00/kgTotal Labour15 hr.Php 70.00/hr.АCTIVITYThe company believes that the usage of wood should be limited in light of the increased awarenessof deforestation and environmental conservation. As a result, the wooden top might be replaced with agranite one. To support the added weight of the granite top, more wood would be needed for thestructure and legs. The next Table lists the materials and labor requirements, as well as the cost of makinga table with a granite top.Description of the itemQuantityCostWood for frame and legs0.15 m3Php 8,200,00/mGranite table top1.62m2Php 570.00/m2Leg bushes4Php 25.00/ bushNails50gPhp 200.00/kgTotal Labour8hrPhp 70.00/hr.If the cost of a dining table with a granite top is less than the cost of a table with awooden top, the company is willing to produce granite-topped dining tables. Calculatethe cost of manufacturing the table for each of the options listed above andrecommend the best option. Also, find the economic advantage of the best alternative.What can you conclude based on the computations you acquired?

To find : Determine the economics advantage of the best alternative Given : description of…

Dining tables are made up mostly of a wooden frame and a table top by a manufacturer. Table lists the various materials used to make the tables, as well as their costs. Description of the item Quantity Cost Wood for frame and legs Php 8,200.00/m 0.1 m Wooden table top with mica finish Php 2,100.00 1 Leg bushes Php 10.00/ bush Nails 100g Php 200.00/kg Total Labour 15 hr. Php 70.00/hr.

Dining tables are made up mostly of a wooden frame and a table top by a manufacturer. Table lists the various materials used to make the tables, as well as their costs. Description of the item Quantity Cost Wood for frame and legs Php 8,200.00/m 0.1 m Wooden table top with mica finish Php 2,100.00 1 Leg bushes Php 10.00/ bush Nails 100g Php 200.00/kg Total Labour 15 hr. Php 70.00/hr.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

please send handwritten solution for Q13 part a
therm0dynamlcsProblem
16. Two types of metal sheets can be used in the manufacture of container vans that require 20 m2 of material. Steel sheets which cost P500.00/m2 may be used but will have to be painted at a cost of P200.00m2, with repainting done every 4 years. Aluminum which costs P1000.00/m2 and is guaranteed to last for 16 years may also be used. If aluminum is used the vans may be sold at P10 000.00 higher than the steel vans at any time. If steel is used repainting has to be done before the vans are sold. If the vans are to be sold after 8 years, determine the material to be used using FW analysis and a 15% MARR. (Ans. Use aluminum, FTA= -P51 180.46) 17. If the vans in Prob. No. 16 are to be sold after 16 years with all other data remaining the same, determine the material to be used. (Ans. Use steel, FTS= -P1175 639.81)
! SHOW FULL SOLUTION ! *DRAW FBD PLS *use DATA GIVEN PROPERLY thank you!
n/mod/quiz/attempt.php?attempt3D2656018cmid%3D36642 NCT e-Learning Portal Courses Reports e-Services - Academic Departments - ETC - CIMS - on 17 In the classification of manufacturing process, pressing is an example of et ered O secondary machining process ed out of O primary shaping process ag question O surface finishing process O joining process stion 18 Gold chains and rings are not possible to made with hand forging operation. yet vered Select one: ked out of O True O False lag question estion 19 Identify the drilling operation in which the flat bottom drill bit is used to enlarge the existing hole. E yet wered O Type here to search 5米 ts 23 $ 6 8. V. E R Y 行 24 47
Show solution. Ansswwr is C pls ?
1. Present solution in personal handwriting. Place final answers in a box. 2. Present detailed drawings/FBD's illustrating your solution. 3ubmissions must be in pdf or jpeg with filename. ME-9SCTION LASTNAME 4. Somit accora epecified schecle andiesation. 5. Deduenons we made for otiAewingstuctions. PROBLEM 1 Determine the load that can be applied at the end of the rigid bar if the stress in either spring shown in the figure shall not exceed 200MP.. Spring 1 Spring 2 n 20 30 d. 10mm 20mm 150mm 120mm G 83GPA 35GPA 2m
Procedure: 1. Copy the following table on a separate sheet of paper. 2. List all knowns 3. List all unknowns 4. List all equations that you need to use 5. Draw a diagram of the problem 6. Substitute and solve the problem. Be sure to show your work (1pt). 7. Final Answer 8. Take a picture and upload your answer! Problem: A 25 ft long solid steel rod is subjected to a load of 10,000 lb. This load causes the rod to stretch 0.477 in. The modulus of elasticity of the steel is 30,000,000 psi. Determine the diameter of the rod. (precision of 0.00) Table: #1 Substitute and Solve: Knowns: Draw: Unknowns: Equation: Final Solution
Question 3 10 points V Sav The basic principle to select a material for a product is to use a material with properties that meet or exceed the product performance requirements, and keep the cost of the product as low as possible to use a material with properties that meet the product performance requirements, and keep the cost of the product as low as possible to use a material with properties that exceed the product performance requirements as much as possible, and keep the cost of the product as low as possible to use a material with properties that meet or exceed the product performance requirements, and keep the cost of the material as low as possible
Plz asap handwritten solution acceptable Will
Please Include complete and prescise FBD for this Problem Thankyouu!
Jncct or pupci. 1. What is your mechanical advantage if you are using a 35 cm wrench on a bolt that has a diameter of 3 cm?