Determine the flow rate in a confined aquifer with a hydraulic conductivity of 20m/d, and thickness of 6.6m. The initial piezometric surface is 14.53 above the lower confining bed, causing the piezometric surface to be 13.85m at a radius of 40m and a 14.31m at a radius of 85m. The solution should include a labeled diagram.

Determine the flow rate in a confined aquifer with a hydraulic conductivity of 20m/d, and thickness of 6.6m. The initial piezometric surface is 14.53 above the lower confining bed, causing the piezometric surface to be 13.85m at a radius of 40m and a 14.31m at a radius of 85m. The solution should include a labeled diagram.

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter6: Hydraulic Conductivity

Section: Chapter Questions

Problem 6.14P

See similar textbooks

Similar questions

P 4: A sand sample of 35cm2 cross sectional area and 20cm long was tested in a constant head permeameter. Under a head of 60cm, the discharge was 120ml in 6min. The dry weight of sand used for the test was 1120g, and G3=2.68. Determine (a) the hydraulic conductivity in cm/s, (b) the discharge velocity, and (c) the seepage velocity. Answers: a) 3.174 x 103 cm/s, b) 9.52 x 10³ cm/s, c) 2.36 x 10-² cm/s
A sand sample of 35m cm^2 cross sectional area and 20cm long was tested in a constant head permeameter. Under a head of 60 cm, the discharge was 120 ml in 6min. The dry weight of sand used for the test was 1120 g, and Gs= 2.68 A. Determine the hydraulic conductivity in cm/sec. B.Determine the discharge velocity in cm/sec. C. Determine the seepage velocity in cm/sec.
Determine the following: a) hydraulic conductivity is ______ x10^3 cm/sec b) Transmissbility of the impermeable layer is _____ cm^2/sec c) The drawdown in the test well is ____ m
(b) TABLE Q1(b) shows three layers of soil used in permeability pilot test. (i) Calculate the average vertical conductivity of the soil in cm/day. (ii) Calculate the transmissivity of the soil when water is at the ground surface. (iii) Discuss the factors that might affect the results obtained in Q1(b)(i) and Q1(b)(ii).
B. Under certain conditions the Thiem equation (5-43) for confined aquifers, is equivalent to the Cooper-Jacob equation (5-58) for confined aquifers. What are the conditions? (This exercise is easier than Problem A.) C. If an analysis is made of the hydraulic conductivity of a site using permeameter tests of core samples, slug tests of monitoring wells, and pumping tests of production wells, it is often observed that the hydraulic conductivity as measured by each method is different. Which method would be most likely to have the greatest hydraulic conductivity, and which the least? What are some possible reasons why this would be true?
(a) A stratified aquifer has a total thickness of 30 m and is made up of three layers. The top layer has a coefficient of permeability of 20 m/day and a thickness of 12.0 m. The middle and bottom layers have permeability of 15 m/day and 20 m/day respectively and are of equal thickness. Calculate the following:
Direction: Choose A- When both statements are true; B - When both statements are false; C- When the first statement is true and the second statement is false; D- When the first statement is false and the second statement is true. First Statement: The piezometric surface of an aquifer confined by an aquiclude is higher than that of an unconfined. Second Statement: Hydraulic conductivity is a measure of permeability or impermeability of a geologic unit. OA B. D.
Three piezometers have been installed in the confined aquifer having a uniform thickness of 4.6 m. and a hydraulic conductivity of 2 x 104 m/s. Be 140m 61m S10m 235m C EL 12292m EL 122.03m E 120.5 Im Aquiclude Aquifer 6m Aquiclude a) Compute the hydraulic gredient. b) Compute the transmissivity in m2/day. c) Compute the flow rate per unit width of the aquifer in liters/day.
A sand sample of 35 sq. cm cross sectional area and 20 cm long was tested in a constant head permeameter. Under a head of 60 cm, the discharge was 120 ml in 6 min. The dry weight of sand used for the test was 1120 g, and Gs = 2.68 1. Determine the hydraulic conductivity in cm/sec. 2. Determine the discharge velocity in cm/sec 3. Determine the seepage velocity in cm/sec
Please answer with complete solution and Fbd. A field sample of an unconfined aquifer is packed in a test cylinder. The length and diameter of the cylinder are 60cm and 8cm, respectively. The field sample is tested for a period of 2min under a constant head difference of 18.5 cm. As a result, 50cm3 of water is collected at the outlet. Determine the hydraulic conductivity of the aquifer sample.
Need help with C. 8. An aquifer has a hydraulic conductivity of 12 ft/d and an effective porosity of 17% and is under a hydraulic gradient of 0.0055. (A) Compute the specific discharge. (B) Compute the average linear velocity. (C) The water temperature is 14°C and the mean pore diameter is 0.33 mm. Is it permissible to use Darcy's law under these circumstances? What is the reason for your answer?
Determine the drawdown at a distance of 50 m from a well pumping constantly at 50 US gpm after one year of pumping. The confined aquifer saturated thickness is 12 m, the hydraulic conductivity is 0.004 cm/s, and the storativity is 0.0004.