Design a filter using the window method and provides the specifications for the filter design. Here is a summary of the specifications given: Stopband: [0 kHz, 4 kHz] Passband: [5.5 kHz, 16 kHz] Maximum ripple in the passband: 0.1 dB Minimum attenuation in the stopband: 51 dB Sampling frequency: 32 kHz The task is to design a filter (by hand, with the impulse response formula) that meets these specifications.

Answer the following wuth illustration and solutions. 1.) A second-order band pass filter is to be constructed using RC components that will only allow a range of frequencies to pass above 500Hz and below 1.5kHz. Assuming that both the resistor have values of 1kohms, calculate the values of the two capacitors required. Find also the center frequency of the two frequencies. This is the example/guide that might help.

Example 23