Describe Typical earth dam sections.

Q: The table below gives area information on earthwork of road cross sections at three different…

A:

Q: What is the top width of a triangular annel having a depth y and side slope Z?

A: OPEN CHANNEL FLOW- FLUID MECHANICS: Option C - 2Zy

Q: Figure 2.5.3 - Qu Inside perimeter Outside perimeter Centreline

A:

Q: Define earth work

A: The engineering work that is created by moving and/or processing unformed rock or large amounts of…

Q: Design a typical layout model for a Water Supply Scheme

A: Brief Concept- Water Supply Scheme- It is the set up of different units for the treatment of water…

Q: How many SF can 1 ton of RipRap cover at 4' thick? SG=2.65, Void Ratio=0.55

A: There is no weight in voids so total weight will be due to solid only. By solid weight we will…

Q: describes a compact section?

A: Compact section: Answer : 3:     section capable of developing its plastic moment capacity.

Q: The areas in cut of two irregular sections 45 m apart are 44 m^2 and 66 m^2 respectively. The base…

A: Given values: Area of 1st cut, A1 = 44 m2 Area of 2nd cut, A2 = 66 m2 Distance between the cuts, L =…

Q: Draw the SFD and BMD.

A:

Q: Explain the outflow and inland river and the side reserve by drawing it by hand. Kindly provide…

A: Lakes are naturally occurring land depressions that are full of water.

Q: Define Deep Foundations.

A: Deep Foundation:

Q: What is gravity dam?

A: The gravity dam can be defined as it is a mass concrete structure which is made up of stone or…

Q: Draw a neat sketch and show complete building bye laws.

A: Building-bye laws are used to regulate the design and construction of the building which are laid…

Q: what method is this? equation or area method

A: Given data in question  Simply supported beam  To be discussed  The method which is used is that…

Q: Describe with suitable sketches how geological structures and features effect dam and reservoir…

A: Question is related to the foundation of reservoirs and dam. In the questions we have to describe…

Q: Define Connections with existing structures

A: Connections are defined as the method of joining or supporting any structure. There are three types…

Q: Calculate the quantity of the earthworks meter for a canal omb

A: Trapezoidal method: -It is defined as a numerical method which is used for evaluating the area of…

Q: Draw a Gantt chart for this project.

A: The following figure shows the Gannt Chart for the project.

Q: Q3) The figure below represent the horizontal coordinates (x, y) and vertical coordinate -ground…

A: Surveying a branch of the construction industry where balancing between different points on the…

Q: Define aqueduct

A: An aqueduct is defined as:

Q: Please show the complete detailed solution. W=53

A:

Q: Two irregular sections of 60 m apart have an area of 32m2 and 68 m2 respectively with a base width…

A:

Q: The table below gives area information on earthwork of road cross sections at three different…

A:

Q: Explain the Plan representation of components and locations for concrete and earth fill dam.

A: Earthfill Dam: Bottom Width: The dam 's highest width or crest size will be adequate to stand up to…

Q: Discuss the advantages and disadvantages of calculating volumes of cut and fill by using the “grid…

A: The most suitable method of calculating volumes of cut and fill volumes is by using a digitizer and…

Q: Why is irrigation channels are often built in trapezoidal cross-section

A: Solution: The irrigation channels are built in the trapezoidal cross section because:1. It is easier…

Q: Define and Explain what is Gardner and Windsor Equation. Show illustration

A: Gardner and Windsor Equation

Q: Excavation, removal and dumping of earth are one of the frequent works in engineering survey. The…

A:

Q: Describe boring spacing and depth?

A: The boring is done for the following purposes- Soil Investigation Determining the depth at which…

Q: Q1)In the shown drawing, a grid area of 50 m X 50 and the grid elevations are provided. a- Calculate…

A:

Q: Draw a simple weir drawing plan (show side elevation and top view)

A: Weir is a hydraulic structure used for various purposes like storage, discharge measurements, silt…

Q: What is the arch dam?

A: Arch dam: It is a curved concrete dam, convex upstream and resists force acting upon it mainly by…

Q: Write the problems associated with tunnels development ?

A: Tunnels are civil engineering structures that create an underground passage that may pass through a…

Q: Discuss MINIMUM COVER REQUIREMENTS AND STANDARD DIMENSIONS

A: Throughout reinforced concrete, the concrete cover is indeed the shortest route between the layer of…

Q: What does Borings and test pits provides?

A: A test pit will decide how secure an excavation area is.

Q: In the process of dividing a tract of land by a line running in a given direction, the surveyor…

A:

Q: Once you finish overlaying layers pertaining to all requested parameters, you can proceed to find…

A: ArcGIS:ArcGIS  family of client software, server software, and online Geographic Information System…

Q: Define Sand Drains.

A: In this case, we need to define the Sand Drains.

Q: Describe different Site conditions?

A: - Various point to be considered during site conditions involves : 1- Topography of site 2- Land…

Q: similar mark on the second road. You are required to supply the site engineer wi cut and fill at 10…

A:

Q: Define heave

A: Heave:

Q: Given the following data of a quadrilateral: ZABC=104°, ZBCD=89°, ZABD=60°, ZACD=53°, and AD=1000 m…

A: The following figure shows the quadrilateral.

Q: What is an earth dam

A: Given data  Earthen dam To be discussed  Earthen dam Materials used

Q: Illustrate a simple drawing plan of an aqueduct.

A: Cross Drainage structure are constructed at the intersection of a canal and a river ,so that the…

Q: 157.*Trench plan of a building shows a) location and dimension of footing in horizontal plane b)…

A: Trench plan shows Length and width depth of a Trench.

Volumes

Volume usually is the dimensional quantity that involves the evaluation of any three-dimensional figure enfolded inside a closed space. The SI unit (International System of Units) of volume is m3 and the dimensional unit of volume is [L3]. For estimation of the volume of any figure, various formulae are used. Another application of volume includes the reference in the sound levels, the higher the sound intensity, the louder the sound heard, and hence, the larger the volume. The SI unit of sound volume is decibels (dB).