D. The figure below illustrates the gears in a speed-change gearbox used in machine tool applications. By sliding the cluster gears on shafts B and C, nine speed changes can be obtained. The problem of the machine tool designer is to select tooth numbers for the various gears so as to produce a reasonable distribution of speeds for the output shaft. The smallest and largest gears are gears 2 and 9, respectively. Using 20 teeth and 45teeth for these gears, determine a set of suitable tooth numbers for the remaining gears. What are the corresponding speeds of the output shaft?

D. The figure below illustrates the gears in a speed-change gearbox used in machine tool applications. By sliding the cluster gears on shafts B and C, nine speed changes can be obtained. The problem of the machine tool designer is to select tooth numbers for the various gears so as to produce a reasonable distribution of speeds for the output shaft. The smallest and largest gears are gears 2 and 9, respectively. Using 20 teeth and 45teeth for these gears, determine a set of suitable tooth numbers for the remaining gears. What are the corresponding speeds of the output shaft?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

lb pair of bevel gears having 20 and 75 teeth are used on axes that intersect at a 90" angle. Determine the velocity ratio and the pitch angles. of both gears.
Three 14.5° pressure angle spur gears with a diametral pitch of 8 are meshed. The input pinion on the left is running clockwise at 3101 rpm and transmits 3.2 Hp. Gear 1 (Pinion) Input N1 = 20 teeth Gear 2 Idler Gear 3 Output N3 = 25 teeth N2 = 75 teeth Answer the following: 1. Pinion (Gear 1) pitch diameter (1 mark) 2. Gear 2 pitch diameter (1 mark) 3. Gear 3 pitch diameter (1 mark) 4. Circular pitch (1 mark) 5. Addenda (1 mark) 6. Center distance from gear 1 to gear 3 (2 marks) 7. Line of action length for gear 1 contacting gear 2 (2 marks) 8. Contact ratio of gear 1 and 2 (2 marks) 9. Gear ratio from gear 1 to gear 3 (1 mark) 10. Draw a free-body diagram of Gear 2, showing the radial and tangential forces. Calculate these forces. What is the reaction force in the bearing? (3 marks)
i need the answer quickly
The total conversion rate of a two-stage gearbox is 53, the conversion rate of the second stage is 1.5 times the conversion rate of the first stage. If the number of teeth of the gear mounted on the input shaft is z1=27 and the number of teeth of the pinion of the second stage is z3=33, how many teeth are the gear z2 of the first stage?
i need the answer quickly
Determine the speed of the gear F
A set of gears is cut with a 4'2-in/tooth circular pitch and a 17/½° pressure angle.* The pinion has 20 full-depth teeth. If the gear has 240 teeth, what maximum addendum may it have to avoid interference?
2. Compute module, clearance, backlash and whole depth for 20° involute gears allowed for meshing spur gears with a circular pitch of diametral pitch of 20. The spur gear has 25 teeth.