crate with mass m = 23.9 kg being pushed up an incline that makes an angle φ = 19.2 degrees with horizontal. The pushing force is horizontal, with magnitude P, and the coefficient of kinetic friction between the crate and the incline is μ = 0.337. Consider the work done on the crate as it moves a distance d = 4.34 m at constant speed

A pail and its contents weigh 80 lbs. The pail is attached to the end of a 100 ft rope that weighs 10 lb and is hanging vertically. How much work is done in winding up the rope with the pail attached? For this problem, set up the appropriate integral(s), and evaluate the integral(s). The integral(s) can be evaluated by a calculator.

A force of constant magnitude pushes a box up a vertical surface as shown in the figure. The box moves at a constant speed. If the mass of the box is 3.70 kg, it is pushed 3.60 m vertically upward, the coefficient of friction is 0.350 and the angle ? is 30.0°, determine the following. (a) work done on the box by F J(b) work done on the box by the force of gravity J(c) work done on the box by the normal force J(d) increase in gravitational potential energy of the box as it moves up the wall J

A 2.28 kg block is pushed 1.69 m up a ver- tical wall with constant speed by a constant force of magnitude F applied at an angle of 60.8° with the horizontal. The acceleration of gravity is 9.8 m/s². 60.8° F 2.28 kg If the coefficient of kinetic friction between the block and wall is 0.631, find the work done by F. Answer in units of J. Answer in units of J. Your response... i Previous Responses X #1.37.76 PALETTE

You are loading a refrigerator weighing 2135 N onto a truck, using a wheeled cart. The refrigerator is raised 1.06 m to the truck bed when it is rolled up a ramp. (Assume that there is no frictional force between the refrigerator and the ramp.) (a) Calculate the minimum work that must be done by the force you apply and the magnitude of the force if the ramp is at an angle with the horizontal of 45.0 degrees. minimum work =      force =   (b) Calculate the minimum work that must be done by the force you apply and the magnitude of the force if the ramp is at an angle with the horizontal of 10.2 degrees. minimum work   =    force=

Total work with vectors

A block of mass 15.0 kg is pulled up from rest on a rough incline. The pulling force F =100.0 N that makes a 5.00° angle with the incline and the incline itself makes an angle of 10.0° with the horizontal. The coefficient of kinetic friction is 0.300, and the block is pulled 3.00 m on the incline. (a) How much work is done by the gravitational force on the block? (b) How much work is done by the 100.0-N force on the block? (c) How much work is done by the normal force? (d) Calculate work done by the friction force on the block. (e) What is the speed of the block after being pulled 3.00 m? F 5° 10°

A single conservative force acts on the a 5.0 kg object.  The equation Fx = 2x + 4 describes the force, where x is in meters.  As the object moves along the x axis from x = 1.0 m to x = 5.0 m calculate the work done by this force.

a block of mass m=5 kg is pulled at a constant speed along a rough horizontal surface by a rope at 30 degree. the tension in the rope is T and the coefficient of kinetic friction between the block and the surface is 0.25. (a) find the tension in the rope. (b) if the block travels a distance of 4.5 m along the surface, what is the work done by the tension force from the rope? (c) find the work done by friction on the rock.

A shopper pushes a grocery cart 36.6 m on level ground, against a 13.1 N frictional force. The cart has a mass of 15.2 kg. He pushes in a direction 17.8º below the horizontal. If the initial velocity was 1.8 m/s, and final speed was 15.4 m/2. What is the work done by the pushing force in unit of Joule?