Consider the following clamped beam with applied moment Mo and uniformly distributed weights 2w and w. a) Find the reaction force/moment (if any) at point A. (b) Using singularity functions, calculate slope and deflection equations, y'(x),y(x). (c) Using singularity functions, find the maximum deflection in the beam.

identify 3 possible places where title blocks are usually found on architectural drawings, identify at least 4 items that are commonly found in title blocks

It is a good practice to include an isometric view without hidden lines as one of the views in your drawing. True? A. Good practice, same scale as principal views B. Good practice; scales can be modified C. Good practice, bust most use hidden lines D. No, isometric view should not be needed or included     ANSI standards dictate the style, dimensions and arrangement of engineering working drawing layouts: A. Yes, they must be followed to ensure…… B. No companies are expected to adhere to the standards but have the latitude to the customize according to individual needs.

If the answer is no can anything be done to save the part?

Diagram: Given the hook-up drawing, list all the equipment, tools and materials that are needed in installation. INST. PIPING 1- *1 INST. PIPING

Paula has worked for Brindle Corporation for 3 years.  During this time, she has worked as a machine operator/cell leader in various work cells.  Recently, the plant went to mandatory 12-hour shifts and plans to remain on this schedule for several months.   Paula’s present work cell is manufacturing 3-inch diameter exhaust tubes that are made from stainless steel.  These tubes get a hole punched in them, a flange welded on, and burrs ground off.  The pipe then gets placed into a gage to check that it was made correctly.  (The tubes weigh about six pounds.)   Paula has been performing the welding operation.  She leans into the machine and loads the part into a fixture then positions the flange.  Both pieces are clamped (using hand clamps) into position and the machine is cycled by depressing two palm buttons.   The gaging operation requires placing the finished part into the gage and clamping it (using hand clamps) into place. A pin is depressed to verify the position of the hole and a…

Paula has worked for Brindle Corporation for 3 years.  During this time, she has worked as a machine operator/cell leader in various work cells.  Recently, the plant went to mandatory 12-hour shifts and plans to remain on this schedule for several months.   Paula’s present work cell is manufacturing 3-inch diameter exhaust tubes that are made from stainless steel.  These tubes get a hole punched in them, a flange welded on, and burrs ground off.  The pipe then gets placed into a gage to check that it was made correctly.  (The tubes weigh about six pounds.)   Paula has been performing the welding operation.  She leans into the machine and loads the part into a fixture then positions the flange.  Both pieces are clamped (using hand clamps) into position and the machine is cycled by depressing two palm buttons.   The gaging operation requires placing the finished part into the gage and clamping it (using hand clamps) into place. A pin is depressed to verify the position of the hole and a…

23. Mastery Objective 23: Perform shearing on triangles and parallelograms, and explain what measurements are preserved or change. (a) Shear the following triangle. Explain what measurements change and what stays the same, justifying your claims. D. (b) Shear the following parallelogram. Explain what measurements change and what stays the same, justifying your claims.

Engineering drawing layout usually include a statement regarding ownership confidentiality or other legal subject matter.  True or False