Consider a datagram network using 32-bit host addresses. Suppose a router has four links, numbered 0 through 3, and packets are to be forwarded to the link interfaces as follows: Destination Address Range Link Interface 11100000 00000000 00000000 00000000 through 11100000 00111111 1111111 11111111 11100000 01000000 00000000 00000000 through 11100000 01000000 1111111111111111 11100000 01000001 00000000 00000000 through 11100001 01111111 1111111111111111 otherwise 0 1 2 3 a. Provide a forwarding table that has five entries, uses longest prefix matching, and forwards packet to the correct link interfaces.

Consider a datagram network using 32-bit host addresses. Suppose a router has four links, numbered 0 through 3, and packets are to be forwarded to the link interfaces as follows: Destination Address Range Link Interface 11100000 00000000 00000000 00000000 through 11100000 00111111 1111111 11111111 11100000 01000000 00000000 00000000 through 11100000 01000000 1111111111111111 11100000 01000001 00000000 00000000 through 11100001 01111111 1111111111111111 otherwise 0 1 2 3 a. Provide a forwarding table that has five entries, uses longest prefix matching, and forwards packet to the correct link interfaces.

Systems Architecture

7th Edition

ISBN:9781305080195

Author:Stephen D. Burd

Publisher:Stephen D. Burd

Chapter9: Computer Networks

Section: Chapter Questions

Problem 3VE

See similar textbooks

Similar questions

For NAT Network Address Translation Scenario: Jenny Bello is a small business owner selling and making customized computer peripherals. She has been finding it difficult to track her sales and inventories, however recently after an expert's advice, she adopted a Point of Sale (PoS) server. So, she can now track her sales and inventories at the store. However, she ran into another issue, the server can only be accessed within the store, because it has been assigned a private IPv4 address, it is not publicly accessible via the Internet. a) Why is not having the PoS server accessible over the Internet a problem for the business? b) What caused this problem? c) Propose a solution for the problem and explain how the solution works.
A frame containing http request is sent from Computer (A) [in whichever subnet it is now, make sure to show it in your figure], to the access point it is associated with. Draw the address fields (1, 2, and 3) of the frame travelling from Computer A to AP and the source and destination addresses of the frame travelling from AP to R1. The MAC addresses of AP1, AP2, and AP3 are M1, M2, and M3 respectively, and the Router R1’s MAC address connected to this Switch/AP is MRA. IP address values are already given, and the port addresses could also be used as given. The Router’s MAC address facing WAN side is MRW.
Computer Science The following character encoding is used in a data link protocol: A: 11100011 B: 01000111 FLAG (start and end character): 01111110 ESC: 00000111 Displays the transmitted bit sequence for the frame: A B ESC FLAG when using each of the following delimitation methods: (a) Delimitation by length (in this case, counting bytes) (b) Delimitation by character of beginning and end (c) hyphenation (bit stuffing)
An Internet Protocol (IP) address is a unique identifier for a computer on the Internet. How does a mnemonic address work? What is the greatest number of unique domains that the 32 bit representation can accommodate? And how many machines may be included in a domain?
Assume that there is a shared connection (for example, an Ethernet bus) with a speed of 1 Mbps. How much time (in microseconds) is required to send a frame with a length of 1000 bits over this link?
While developing a reliable transport protocol, early versions of the protocol discussed in class used a NAK message, sent by the receiver to the sender to indicate a packet was not correctly received. This kind of message, however, is not found in further protocols, like GBN, SR or even TCP. Why not? In other words, why don't these protocols provide a way to signal to the sender that the received message was received with an error
Computer Networks Problem In the CSMA/CD protocol, the network adapter waits K-512 bit times after a collision, where K is drawn randomly. For K=20, how long does the adapter wait until returning to Step 2 for a 10 Mbps broadcast channel?
To begin, what is an Internet Protocol (IP) address and how does it differ from a domain name? What use do mnemonic addresses serve? Is there a restriction on the number of domains that a 32-bit representation can store? Is there a limit to the number of machines that a domain may contain?
Network Address Translation, or NAT, was used very often before IPv6 was fully implemented as a means to mask IPs, as well as to have many more IPs at one's disposal behind a router. Now that we are fully into using IPv6, is NAT needed anymore? What would some of the utility of NAT be?
When designing Elementary data connection protocols, what kind of assumptions were made?
The first thing needed is a IP-addressing range to use in our network. Since this assignment is done in a laboratory setting, we don't have to comply to the RFC1918[2] standards of private IP-addressing. An IP address is written in the form shown in equation (2.1.1). X grpl grp2 grp3 grp4 X grpl grp2 grp3 grp4 We need however to take into consideration that the address range of 224.0.0.0/3 have been reserved, for amongst other thing multicast. Because of this, we will need to use another modulus-value on the first octet when we are generating a usable ip-address range. Start by creating your groups unique IP-address range using equation (2.1.2) where {x,y EZ | 0≤x≤ 223,0 ≤ y ≤ 255} (2.1.2) where {x EZ | 0≤x≤ 255} Where each octet will be based on each group members birthday. Value X is calculated according to equation (2.1.3), and value Y is calculated according to equation (2.1.4). YY * MM + DD mod 223 YY MM + DD X mod 255 grpl (2.1.1) The fourth group in the IP-address should be set…
Computer Science What is the total number of addresses in IPv6 address scheme (give your answer in comma separated actual numeric value)? Give examples of IPv6 address types: a unicast address, a multicast address, a loopback address, and an unspecified address (e.g., when host does not have an address assigned).