Condenser a steam power plant that operates on a simple ideal ranking cycle and has a net power output of 22MW. Steam enters the turbine at 7Mpa and 450.05°C and is cooled in the condenser at a pressure of 10kpa by running cooling water from a lake through the tubes of the condenser at rate of 1750 kg/s. Determine the mess flow rates of steam through the steam turbine assuming that the cp of superheated steam is 2.9593kJ/kg.K

Condenser a steam power plant that operates on a simple ideal ranking cycle and has a net power output of 22MW. Steam enters the turbine at 7Mpa and 450.05°C and is cooled in the condenser at a pressure of 10kpa by running cooling water from a lake through the tubes of the condenser at rate of 1750 kg/s. Determine the mess flow rates of steam through the steam turbine assuming that the cp of superheated steam is 2.9593kJ/kg.K

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 12RQ: Refrigerators currently being manufactured in the United States are using______as their refrigerant.

See similar textbooks

Similar questions

Condensers in these refrigerators are all_______cooled.
TNB steam power plant in Genting Highlandsoperates on reheat Rankine cycleand has power net output of 50MW. Steam enters the turbine at aMPa and b °Cand it is cooled in the condenser at a pressure of ckPa by running cooling water from the Bertam River through the tubesof condenser. Steam enters both stages of the turbine at b°C. If the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, show the cycle on a T-s diagram and determine;i.The pressure at which reheating takes place, ii.The thermal efficiency of the cycleandiii.Please justify how does the thermal efficiency of the cycle if the temperature to low turbine is increase to 600°C? a=12 b=500 c=12
developing 60kw of refrigeration using refrigerant R134a with condensing temperature 400C and evaporating -30 oC vapor is superheated before entering the compressor by 5 oC while the liquid will be sub-cooled by 6 oC, CalculateThecoefficient of performance and The total work done in the cycle and The mass flow rate of the refrigerant
rankine cycle, the pressure and temperature entering the turbine is 1800 kpa and 380 degrees celsius and the pressure leaving the turbine is 20 kpa, the quality of steam entering the condenser is 90%. what is the turbine work in kj/kg at 1.8 mpa and 380 degrees celsius
Refrigerant 134a enters the compressor of a vapor-compression refrigeration cycle at 150 kPa as a saturated vapor and leaves at 850 kPa. The refrigerant leaves the condenser as a saturated liquid. The rate of cooling provided by the system is 7kW. a. Determine the mass flow rate of R-134a and the cop of the cycle. b. If the condenser pressure is changed to 950 kPa, find the cop of the cycle.
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration How much make-up water is needed?
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration How much vapor must the steam ejector remove from the flash chamber?
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration A) How much chilled water at 5oC does this system provide? B) How much make-up water is needed? C) How much vapor must the steam ejector remove from the flash chamber?
The enthalpy entering the turbine of a geothermal power plant is 2750 KJ/kg and ,ass rate of 1 Kg/sec. The turbine brake power is 1000 KW condenser outlet has enthalpy of 210 KJ/kg. If temperature rise of cooling water in condenser is 8, what is the mass of cooling water requirement?
Refrigerant 22 is the working fluid in a Carnot vapor refrigeration cycle for which the evaporator temperature is -30°C. Saturated vapor enters the condenser at 36°C, and saturated liquid exits at the same temperature. The mass flow rate of refrigerant is 10 kg/min. Determine the rate of heat transfer to the refrigerant passing through the evaporator, in kW,
Steam is produced for an ideal turbine at a pressure of 3.0MPa. The condenser pressure is 2.0kPa. The heat added per kilogram is 2750kJ. Neglecting pump work, determine the thermal efficiency.
A steam turbine operates receiving steam from the boiler at 2000 psia and 1000 F. The steam expands to 600 psia where there is an extraction port. The temperature of the extracted steam is 750 F. 25% of the entering steam flow is extracted and sent to a feedwater heater. The remaining steam inside the turbine expands to 1.0 psia, the condenser pressure. The quality of the steam exiting the turbine to the condenser is 85%. Calculate the isentropic efficiency of the turbine. Answers: 73% 78% 64% 68% 85%