Compound axial member ABC has a uniform diameter of d = 3.0 in. Segment (1) is an aluminum [E₁ = 10,000 ksi] alloy and segment (2) is a copper [E₂ = 17,000 ksi] alloy. The lengths of segments (1) and (2) are L₁ = 90 in. and L₂ = 140 in., respectively. Determine the force P required to stretch compound member ABC by a total of 0.20 in. L₁ L2 A Copper Answer: P= (1) Aluminum B kips

Compound axial member ABC has a uniform diameter of d = 3.0 in. Segment (1) is an aluminum [E₁ = 10,000 ksi] alloy and segment (2) is a copper [E₂ = 17,000 ksi] alloy. The lengths of segments (1) and (2) are L₁ = 90 in. and L₂ = 140 in., respectively. Determine the force P required to stretch compound member ABC by a total of 0.20 in. L₁ L2 A Copper Answer: P= (1) Aluminum B kips

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The rigid bar ABC is pinned at B and attached to the two vertical rods. Initially, the bar is horizontal and the vertical rods are stress-free. Determine the stress in the aluminum rod if the temperature of the both rods is decreased by 40°C. Neglect the weight of bar ABC. 3. Steel L=0.9 m A = 300 mm? E=200 x 10 N/m a 11.7 um/(m C) Aluminum L= 1.2 m A= 1200 mm E= 70 x 10 N/m a = 23 um/(m C) Answer: Oal = 0.6 m 1.2 m 2/2 A rigid bar of negligible weight is supported as shown in the figure. If W = 80 kN, compute the temperature increase that will cause the Bronze L = 3 m A = 1300 mm E = 83 GPa 4. Steel L= 1.5 m A = 320 mm +1m-E= 200 GPa stress in the steel rod to be 55 MPa. Assume the coefficients of linear expansion are 11.7 µm/(m-°C) for steel and 18.9 µm/(m.°C) for bronze. ΔΤ Answers: 2.5 m 1.5 m
A uniform bar 1 is connected to a tapered rod 2. Both are subjected to axial loads as shown . If P = 7kN Determine the axial deformation of rapered rod 2 (in mm) Indicate negative sign if compression. Complete solution no rounding off.
A two pinned end bars AB (copper) and BC (aluminum) is subjected to a horizontal force P = 90KN applied at pin B %3D as shown in the figure, determine the horizontal displacement of pin B. Aluminum: L= 1.5m, A= 1000mm2, E= 70 GPa Copper: L= 2.0m, A= 850mm², E= 120 GPa Degree: 45° Alumaum L-15m A=1000 mm E-70 GPa >P=90 kN Copper L=2.0m Aa550 mm E=120 GPa
A thin high-strength steel plate having a thickness of 40 mm has a height of 120 mm and length of 350 mm, is subjected to a moment at both ends = 66 kN.m. E= 28000 MPa Determine the bending stress of the steel plate in MPa Choose This is a required question Determine its radius of curvature in mm. Choose This is a required question *
8. A rigid bar AB is supported by three rods. A load P = 250 kN is applied to the bar. The modulus of elasticity of copper is 110 x 10°6 kN/m^2 and modulus of elasticity of steel is 200 x 10°6 kN/m^2. Steel rod A= 900 sq. mm Steel rod A= 900 2m sq. mm Copper A=1200 sq. mm 2m B 1m 1m Determine the deformation in the rods (in mm). * Your answer
Q2. Two members of Aluminium AB and BC are connected as shown in the Figure Q2.Point A is a fixed end support, point B is a pin connection and point C is a pin support. The cross section of member AB is 120 x 120 mm and member BC is a rod of 120 mm diameter. A forced P is applied to the connection B. Given the young modulus, E = 70 kN/mm² for both members. (a) Prove that both members are slender (Member is slender when the slenderness ratio, λ >90) (b) Determine the maximum load, P that can be carried by the structure. (c) Determine the allowable load, P if the factor of safety is 3.0. 4m P KN B 2m 2m 1m
Question # 4: Determine the state of stress at point A on the cross section of the beam at section a-a. Show the results in a differential element at the point. a a 0.5m 0.5m 30 kN 2 m 100mm 50mm A 10mm 10mm 180mm Section a-a 10mm
Q1. An aluminum rod is rigidly attached between a steel rod bronze rod as shown in figure. Axial loads are applied at the positions indicated. Find the maximum value of P that will n exceed a stress in steel of 90 MPa, in aluminum of 140 MPa bronze of 120 MPa. Aluminum Вronze A= 300 Steel A=100 A=200 ЗР 2P 5P 2.5m 2.0 m 1.5 m
2. Solve for the deformation of the aluminum rod. 200 mm 300 mm 600 kN Aluminum E= 70 GPa A= 900 mm Steel E= 200 GPa A=1200 mm
The rigid bar AC is pinned at A and attached to bars DB and CE as shown in the figure. The weight of AC is 50 kN and the weights of the other two bars are negligible. Consider the temperature of both bars DB and CE to be raised 35°C. Find the resulting normal stresses in these two bars. DB is copper for which E = 90 GPa, a = 18 × 10-6/0C, and the cross-sectional area is 1000 mm?, while CE is steel for %3D = 12 x 10-6/°C, and the cross which E = 200 GPa, a section is 500 mm?. Neglect any possibility of lateral buckling of the bars. %3D D E I m B
A rigid bar of negligible weight is pinned at O and attached to two vertical rods. Assuming that the rods were initially stress-free, what is the largest load P that can be applied without exceeding stress of 150 MPa in steel rod and 70 MPa in bronze rod. 2 m -1.5 m |+1.5 m→ 10 Bronze A = 300 mm2 E = 83 GPa Steel A = 900 mm2 E = 200 GPa L=2 m L= 1.5 m
The uniform beam of weight W is to be supported by the two rods, the lower ends of which were initially at the same level. Determine the ratio of the areas of the rods so that the beam will be horizontal after it is attached to the rods. Neglect the deformation of the beam. Steel 6 ft E = 29 × 10° psi Aluminum 4 ft E = 10 × 10° psi W 3 ft- 6 ft - k1.0 ft