Coaxial cable of an infinite produces reflection coefficient of – 0.3 + j0.4 when terminated in a load, when short circuited produces impedance of 17.0 + j 19.4 Ω whiles 115 + j 138 Ω is the impedance measured when no load is connected. Evaluate Characteristics impedance, attenuation and phase propagation factors of the line at a distance of 32 meter from the sending end

Coaxial cable of an infinite produces reflection coefficient of – 0.3 + j0.4 when terminated in a load, when short circuited produces impedance of 17.0 + j 19.4 Ω whiles 115 + j 138 Ω is the impedance measured when no load is connected. Evaluate Characteristics impedance, attenuation and phase propagation factors of the line at a distance of 32 meter from the sending end

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.27MCQ: In terms of line-to-line capacitance, the line-to-neutral capacitance of a single-phase transmission...

See similar textbooks

Similar questions

In terms of line-to-line capacitance, the line-to-neutral capacitance of a single-phase transmission line is Same Twice One-half
A single-phase transmission line consisting of two conductors, the radius of each conductor is 0.4 cm, the distance between the conductors is three and half meters and the height above ground is eight 1-The capacitance in uF/km without effect of ground is 2-The capacitance in pF/km with effect of ground is
One circuit of a single-phase transmission line is composed of three solid 0.12" radius wires. The return circuit is composed of two 0.15" radius wires. Find the inductance of the complete line in mH/mi. The distance between wires are 40" horizontally and 25" vertically. A. 2.54 mH/mi B. 2.478 mH/mi C. 2.488 mH/mi D. 2.567 mH/mi Provide Clear Explaination
If a 3-phase short circuit occurs in one of the two circuit of transmission line at point F, and the shunt impedance of the short circuit is j0.1 pu. Determine the maximum time when a short circuit can still be cleared. So=0.8+j0.3 Xd'= 0.2, XL1=XL2= 0.6, XT1=0.12, Xr2= 0.1, L1 V= 1.0 T1 L2 F T2 .XL= 0.1 Хс- 0.1. S1 S2 SL= 0.6+j0.3
q) Phase velocity of voltage wave in a distortion less line having characteristic impedance 0.2 kΩ, velocity 0.5*108 m/s then the value of capacitance per meter?
1. The conductor used in a three-phase 60 Hz transmission line is 795000 cmil ACSR 54/3 and the lineIt is fully transposed and is 100 miles long. D12=7.5 m 1 2 D23 7.5 m 3 D31=1.3 m a) Determine the line inductive reactance value. b) capacitive reactance per mile with respect to neutral and line capacitance with respect to neutralset its value.
A three phase transposed line is composed of three conductor bundle. The conductors have a diameter of 2.1793 cm and a GMR (r) of 0.8839 cm. The spacing between the conductors in the bundle is 45 cm, and the GMD-18.8988 m. a b 0,0 45- O 0,0 I D D H 2D and the capacitance per phase is C then the GMRC of the line is
4/ Which parameter is neglected or ignored in Short Transmission Lines? A. SHUNT CAPACITANCE ONLY B. SERIES CONDUCTANCE AND SHUNT CAPACITANCE C. SHUNT CONDUCTANCE AND SHUNT CAPACITANCE D. SHUNT CONDUCTANCE ONLY
60 Hz three-phase transmission line, Each single phase transmission line consists of two hard-drawn aluminium conductors with a radius of 2 cm spaced 1.2m apart. It delivers 150 MW at 220 KV at the receiving end with a power factor of 0.88 lagging. If the transmission line is 30 Km long and the temperature of the conductors is 20 C. Ignore the skin effect and consider the resistivity of Aluminium is (2.83 x 10-8), and permeability of free space, u= 4pi*10-7 N/A2 and permeability of it is= 8.85x10-12 F/m. - Find total series impedance. - Find total shunt admittance. - Find the voltage at the sending end using long-line equation.
If the maximum and minimum voltages on a transmission line are 4 V and 2 V, respectively, for a typical load, VSWR is (A) 1 (B) 0.5 (C) 2 (D) 8
2. A three-phase 60-hz transmission line has its conductors arranged in a triangular formation so that two of the distances between conductors are 20 ft and the third is 40 ft. The conductors are ACSR Rook. Determine the capacitance to neutral in microfarads per mile and the capacitive reactance to neutral in ohm-miles. If the line is 115 mi long, find the capacitance to neutral and capacitive reactance of the line.
b) A 6052 characteristic impedance transmission line is fed by a DC source of 100V with an internal resistance of 4002. The line is 200m long and has a dielectric constant of 2.25. The load impedance is 12002. Calculate: i. The load reflection coefficient. ii. The source reflection coefficient. iii. What is the voltage at the source terminals just before AND just after 2us?