Circuit Assignment (Digital Logic) You have been hired by a home security company to design and implement a home alarm system. The logic of the system is as follows: Once the alarm system has been armed, it is to sound if the front door is opened, or (the back door is opened and window is opened). Design the necessary circuit using use any method to implement the situation above. Your circuit should have 4 inputs (A-alarm, F=front door, B-back door, W= window). A=1 means the system is Armed. F-1 means Front door is open. B-1 means Back door is open. W=1 means Window is open. There should be one output S. When S= 1 the alarm should sound, otherwise the alarm is silence. Submit these 3 items: 1- Create the formula, S = ... in terms of the variables 2 - Create the truth table, 3- Draw the Circuit. (You can use the zyBooks tool to build the circuit and screen shot the circuit image.)

Circuit Assignment (Digital Logic) You have been hired by a home security company to design and implement a home alarm system. The logic of the system is as follows: Once the alarm system has been armed, it is to sound if the front door is opened, or (the back door is opened and window is opened). Design the necessary circuit using use any method to implement the situation above. Your circuit should have 4 inputs (A-alarm, F=front door, B-back door, W= window). A=1 means the system is Armed. F-1 means Front door is open. B-1 means Back door is open. W=1 means Window is open. There should be one output S. When S= 1 the alarm should sound, otherwise the alarm is silence. Submit these 3 items: 1- Create the formula, S = ... in terms of the variables 2 - Create the truth table, 3- Draw the Circuit. (You can use the zyBooks tool to build the circuit and screen shot the circuit image.)

C++ for Engineers and Scientists

4th Edition

ISBN:9781133187844

Author:Bronson, Gary J.

Publisher:Bronson, Gary J.

Chapter5: Repetition Statements

Section: Chapter Questions

Problem 2PP: (Mechanics) The deflection at any point along the centerline of a cantilevered beam, such as the one...

See similar textbooks

Similar questions

2- The short circuit is defined as resistance, then the current is . .Amper.
A circuit is constructed with four resistors, one inductor, one battery and a switch as shown. The values for the resistors are: R1 = R2 = 72 Q, R3 = 61 Q and R4 = 99 Q. The inductance is L = %3D V L 549 mH and the battery voltage is V = 24 V. R3 1) The switch has been open for a long time when at time t = 0, the switch is closed. What is l1(0), the magnitude of the current through the resistor R1 just after the switch is closed? A Submit 2) What is 1(o0), the magnitude of the current that flows through the resistor R1 a very long time after the switch has been closed? A Submit 3) What is VL(0), the magnitude of the voltage across the inductor just after the switch is closed? V Submit 4) What is IL(0), the magnitude of the current through the inductor after the switch has been closed for a very long time? A Submit 5) What is I2(0), the magnitude of the current through the resistor R2 just after the switch is closed? A Submit
Matlab
Code in MATLAB Copy is strictly prohibited
(Mechanics) The deflection at any point along the centerline of a cantilevered beam, such as the one used for a balcony (see Figure 5.15), when a load is distributed evenly along the beam is given by this formula: d=wx224EI(x2+6l24lx) d is the deflection at location x (ft). xisthedistancefromthesecuredend( ft).wistheweightplacedattheendofthebeam( lbs/ft).listhebeamlength( ft). Eisthemodulesofelasticity( lbs/f t 2 ).Iisthesecondmomentofinertia( f t 4 ). For the beam shown in Figure 5.15, the second moment of inertia is determined as follows: l=bh312 b is the beam’s base. h is the beam’s height. Using these formulas, write, compile, and run a C++ program that determines and displays a table of the deflection for a cantilevered pine beam at half-foot increments along its length, using the following data: w=200lbs/ftl=3ftE=187.2106lb/ft2b=.2fth=.3ft
Design logic circuits that controls an elevator door in a 3 story building. The circuit has a for input lines. M is a logic circuit that indicates when the elevator is moving (M = 1) or stopped (M = 0). F1, F2, F3 are floor indicator signals that are normally low, and they go hi only when the elevator is positioned at the level of the particular floor. For example, when the elevator is lineup level with the second floor F2=1 and F1 = F3 = 0 the circuit output is the OPEN signal which is normally Low and it is to go HIGH when the elevator door is to be opened
Programmable Logic Controller
6. For the following Verilog code, draw the corresponding circuit diagram for "bigMod". Your circuit should only involve standard gates (AND, OR, NAND, NOR, XOR, Inverter), and the variable names Val, X, Y, and Z. DO NOT SIMPLIFY THE CIRCUIT. Note: all of the code is legal Verilog, with no errors. module tstMod (F, A, B, C); output logic F; input logic A, B, C; assign F endmodule = (A & ~B & C) | (A & C) | ~B; module bigMod (Val, X, Y, output logic Val; input logic X, Y, Z; logic T; Z); .C (Y)); tstMod T1 (.F (T), .A (X), .B (1'bl), tstMod T2 (.F (Val), .A(Z), .B (T), .C (X)); endmodule
Q
VHDL Coding (Circuit Diagram is given ~ Create it's Structural and Behavioral VHDL Program Please make sure your EDAPlayground is working
MATLAB CODE
Given the following code, draw the circuit that will be inferred. always @ (negedge clk) begin out <= in1 &in2; out <= in1|in2; out <= in1^in2; end