Charyeong wants to determine the permeability of an aquifer. The aquifer has a 300 mm diameter test well that penetrates 27 m. below the static water table. After 24 hours of pumping at 61 liters/sec, the water level in an observation well 93.53 m. from the test well was lowered to 24.83 m. and the other observation well at 33.3 m. from the test well, was lowered to 23.02 m. Determine the coefficient of permeability of the aquifer in m/day.

Charyeong wants to determine the permeability of an aquifer. The aquifer has a 300 mm diameter test well that penetrates 27 m. below the static water table. After 24 hours of pumping at 61 liters/sec, the water level in an observation well 93.53 m. from the test well was lowered to 24.83 m. and the other observation well at 33.3 m. from the test well, was lowered to 23.02 m. Determine the coefficient of permeability of the aquifer in m/day.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

31 Yuri wants to determine the permeability of an aquifer. The aquifer has a test well 300-mm in diameter with two observation wells. A pumping test was conducted for 24 hours with the discharge being held constant at 5,721.4 m^3/day. The first one, 81.07 meters from the test well, has a draw-down of 0.6 meters. The second one, 40 meters from the test well, has a draw-down of 1.43 meters.The static water table penetrates the well to a depth of 25 meters. Determine the radius of influence of the aquifer in meters. Round off to three decimal places.
Yuri wants to determine the permeability of an aquifer. The aquifer has a test well 300-mm in diameter with two observation wells. A pumping test was conducted for 24 hours with the discharge being held constant at 6,162.8 m^3/day. The first one, 83.03 meters from the test well, has a draw-down of 0.92 meters. The second one, 40 meters from the test well, has a draw-down of 1.44 meters.The static water table penetrates the well to a depth of 28 meters. Determine the radius of influence of the aquifer in meters.
To determine the permeability of an aquifer. The aquifer has a test well 300-mm in diameter with two observation wells. A pumping test was conducted for 24 hours with the discharge being held constant at 5,598.8 m^3/day. The first one, 88.03 meters from the test well, has a draw-down of 0.95 meters. The second one, 42 meters from the test well, has a draw-down of 1.39 meters.The static water table penetrates the well to a depth of 27 meters. Determine the radius of influence of the aquifer in meters.
Yuri wants to determine the permeability of an aquifer. The aquifer has a test well 300-mm in diameter with two observation wells. A pumping test was conducted for 24 hours with the discharge being held constant at 5,957.2 m^3/day. The first one, 89.85 meters from the test well, has a draw-down of 0.69 meters. The second one, 48 meters from the test well, has a draw-down of 1.2 meters. The static water table penetrates the well to a depth of 25 meters. Determine the radius of influence of the aquifer in meters. Round off to three decimal places.
Question 19 Yuri wants to determine the permeability of an aquifer. The aquifer has a test well 300-mm in diameter with two observation wells. A pumping test was conducted for 24 hours with the discharge being held constant at 5,696.1 m^3/day. The first one, 89.64 meters from the test well, has a draw-down of 0.72 meters. The second one, 47 meters from the test well, has a draw-down of 1.14 meters.The static water table penetrates the well to a depth of 29 meters. Determine the radius of influence of the aquifer in meters. Round off to three decimal places.
Yuri wants to determine the permeability of an aquifer The aquifer has a test well 300-mm in diameter with two observation wells A pumping test was conducted for 24 hours with the discharge being held constant at 5,608.7 m^3/day. The first one, 86 59 meters from the test well, has a draw-down of 0.81 meters. The second one, 48 meters from the test well, has a draw-down of 1.13 meters. The static water table penetrates the well to a depth of 28 meters. Determine the radius of influence of the aquifer in meters Round off to three decimal places. Activate Windows A Moving to another question will save this response. Go to Settings to actiyate Windows Question 8 of 20 ASUS W R] 7T U K
A 300 mm diameter test well penetrates 27 m below the static water table. After 24 hours of pumping at 69 liters/sec, the water level in an observation well at a distance of 95 m from the test well is lowered 0.5 m and the other observation well at a distance of 35 m from the test well, the drawdown is 1.1 m. Compute the transmissibility of the aquifer in m^2/day.
14. A 300 mm diameter test well penetrates 24 m below the static water table. After 24 hours of pumping at 69 liters/sec, the water level in an observation well at a distance of 96 m from the test well is lowered 0.60 m and the other observation well at a distance of 34 m from the test well, the drawdown is 1.2 m. Compute the coefficient of permeability of the unconfined aquifer in m/day. Compute the transmissivity of the unconfined aquifer in m2/day. Compute the transmissivity if there is a confined aquifer of 8m, thick below the unconfined aquifer m2/day.
A 20-cm well penetrates 25 m below the static water table. After 24 hours of pumping out at the rate of 800 lpm, the water level in a test well at 80 m from the pumping well is lowered by 0.53 m and in a test well 20 m away 2.11 m. Find the coefficient of transmissibility of the aquifer.
An unconfined aquifer is 100 feet thick was evaluated using a field pumping test. The depth to groundwater is 10 feet. At a distance of 1000 feet, the drawdown was 40 feet, and at a distance of 5000 feet it was 20 feet. Find the permeability of the aquifer assuming that a steady-state of 960 gal/minute during the test in ft/sec.
A 300 mm diameter test well penetrates 24 m below the static water table. After 24 hours of pumping at 70 liters per second, the water level in an observation well at a distance of 96 m from the test well is lowered by 0.60 m and the other observation well at a distance of 34 m from the test well, the drawdown is 1.2 m. 1. Compute the coefficient if permeability of the unconfined aquifer in m/day. 2. Compute the transmissibility of the unconfined aquifer in m2/day.
A saturated aquifer sample core of diameter 2.54 cm and length of 6 cm weighs 63 grams. After drying the sample weighs 53 grams. The core sample was placed into an permeameter and exposed to a unit hydraulic gradient. The measured flowrate was 25.4 milliliters/second. The water levels in three wells in the same aquifer were measured in meters above MSL. The levels were: Well MW-1: 83.1 m; Well MW-2: 84.6 m; Well MW-3: 83.9 m. Well MW-2 is located 1km due north of Well MW-1, and Well MW-3 is located 700 meters Northeast of Well MW-1. Determine: 1. Estimate the porosity of the aquifer. 2. Estimate the hydraulic conductivity of the aquifer. 3. Sketch the relative positions of the three wells. Use MW-1 as the origin of the local (your sketch) coordinate system, and North is to the top of your sketch. 4. Determine the magniture and direction of the hydraulic gradient in the aquifer monitored by the three wells. Indicate the hydraulic gradient on your sketch (direction and magnitude) 5.…