Calculate the number of days required to dig a dirt road with a length of (4 km), a width of 300 cm) and a thickness of (0.2m), using two excavators, if you know that each excavator works with two vehicles with a capacity of (10) m3 in the measure of looseness and each of them, in order to transport the soil excavations outside The site, and the productivity of one cart in the bank scale (16 m3/hr) and the soil density in the loose and bank scale are (1450kg/m, (1350kg/m3), respectively: Also, the efficiency of the cart (90) and the number of working hours per day (7) hours?

Calculate the number of days required to dig a dirt road with a length of (4 km), a width of 300 cm) and a thickness of (0.2m), using two excavators, if you know that each excavator works with two vehicles with a capacity of (10) m3 in the measure of looseness and each of them, in order to transport the soil excavations outside The site, and the productivity of one cart in the bank scale (16 m3/hr) and the soil density in the loose and bank scale are (1450kg/m, (1350kg/m3), respectively: Also, the efficiency of the cart (90) and the number of working hours per day (7) hours?

Principles of Foundation Engineering (MindTap Course List)

9th Edition

ISBN:9781337705028

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter5: Soil Improvement And Ground Modification

Section: Chapter Questions

Problem 5.5P

See similar textbooks

Similar questions

for Shovel Excavator Soil Type = dry clay -Rotation angle = 75° -State of work = average - State of management = average - Excavation height = 3.05 m Q:What is the efficency per hour? (Swelling)
In a certain portion of a road construction, the following data were taken; Cost of haul = P30 per cu. m per station Cost of borrow = P360 per cu. m. Free haul distance = 60m Volume of burrow = 7700 cu. m. Volume of waste = 7000 cu. m. Unit cost of excavation = P300 per cu. m. A) Compute the length of the Economical Haul. B) Calculate the Cost of Excavation.
You are a civil engineer who has been given the task to monitor the excavation of road construction. It is deemed viable that it typically takes half an hour to excavate a cubic meter of soil using a typical backhoe that applies to soils within a two-meter depth from its NGL. This parameter includes hauling, piling, and other small movements within the area bound for excavation. Given that the volume to be excavated is 43m in your specified road station using only one backhoe, determine the exact total cost for this setup if the backhoe rent costs Php1800 per hour which includes its gasoline and other daily maintenance costs. The hourly wage paid to these two workers at every end of their daily shift is taken as Php104 for the backhoe operator and Php43 for the backhoe spotter. For work-life balance, you always make sure that there are only eight working hours per day with no overtime and no work on Sundays for all your workers. Note that the total cost does not include your salary as…
You are a civil engineer who has been given the task to monitor the excavation of a road construction. It is deemed viable that it typically takes half-an-hour to excavate a cubic meter of soil using a typical backhoe which applies to soils within a two-meter depth from its NGL. This parameter includes hauling, piling, and other small movements within the area bound for excavation. Given that the volume to be excavated is 39.5m in your specified road station using only one backhoe, determine the exact total cost for this setup if the backhoe rent costs Php2465 per hour which includes its gasoline and other daily maintenance costs. The hourly-wage paid to these two workers at every end of their daily shift is taken as Php99.8 for the backhoe operator and Php43.2 for the backhoe spotter. For work-life balance, you always make sure that there's only eight-working-hours per day with no overtimes and no work during Sundays for all your workers. Note that the total cost does not include your…
Q1. Answer the followinga) Convert 1700LCM of common earth to a volume in compacted measure (CCM). b) Calculate the volume of sand and gravel (in LCM) needed to fill a ditch that is 2km x 3m x 1.5m. The sand and gravel will be compacted.
You are a civil engineer who has been given the task to monitor the excavation of road construction, It is deemed viable that it typically takes half an hour to excavate a cubic meter of soil using a typical backhoe that applies to solls within a two- meter depth from its NGL. This parameter includes hauling, piling, and other small movements within the area bound for excavation. Given that the volume to be excavated is 36m in your specified road station using only one backhoe, determine the exact total cost for this setup if the backhoe rent costs Php1800 per hour which includes its gasoline and other daily maintenance costs. The hourly wage paid to these two workers at every end of their daily shift is taken as Php101 for the backhoe operator and Php41 for the backhoe spotter. For work-life balance, you always make sure that there are only eight working hours per day with no overtime and no work on Sundays for all your workers. Note that the total cost does not include your salary as…
An earth dam requires 1 million cubic meters of soil compacted to a void ratio of 0.80. In the vicinity of the proposed dam, suitable materials. The cost purchasing the soil and the cost of excavation are the same for each borrow pit. The only cost difference is transportation cost. The table below provides the void ratio and pit. four borrow pits were identified as having the transportation cost for each borrow Borrow Pit Void Ratio Transportation Cost (Php/m²) 1 1.80 35.00 2 0.90 50.00 3 1.50 37.50 4 1.30 42.00 1. Compute the cost for borrow pit 2. 2. Compute the cost for borrow pit 4. 3. Which borrow pit would be the most economical?
An approach road for a bridge needs 60000 m3 of soil compacted to a void ratio of 0.7. There are two borrow pits A and B from where the required soil can be taken and transported to the site. The borrow pit A has void ratio 0.85 and borrow pit B has void ratio 0.95. If the cost of excavation of soiland transportation is Rs. 20/10 m3for area A and Rs. 22/10 m3for area B, which of the borrow area is more economical? G=2.67
4. Given the approximate flat area and depth of excavation of the following borrow pits: a. 3750.0 sq. m. and 758.0 cm b. 0.035 sq. km and 180.0 m c. 15.6 ares and 495.0 m d. 9.250 ha and 250.0 m e. 46750 sq. m. and 195.0 m Determine the volume of earth removed from each pit in cubic meters.
6.5 Complete the earthwork calculation sheet here and plot the resulting mass diagram. Divide ccy by 0.9 to convert to bcy (column 10). Calculate th average haul (trapezoidal formula) for the balances on this project. Is this a waste or borrow project? Alge- braic Strip- ping fill Strip- ping cut Vol. of End- Vol. of End- Total fill Adj. fill Total Mass ordi- area area cut sum fill fill cut cut (ccy) (bcy) (ccy) (8) (bcy) (10) (bcy) (11) (bcy) (ссу) (Ьсy) (5) nate (sf) (2) (sf) (3) Station (9) (7) (12) (6) (4) (1) 0.90 10 + 00 80 580 11 + 00 90 2100 0. 12 + 00 100 13 + 00 4650 100 6000 14 + 00 60 80 560 3250 15 + 00 80 1620 16 + 00 1300 85 80 2450 700 17 + 00 100 7800 18 + 00 90 3620 1980 19 + 00 80 20 + 00 80 1310 21 + 00 10 80 860 580 22 + 00 100 10 23 + 00 1620 250 100 3850 24 + 00 100 25 + 00 2600
13. An earth dam requires one million cubic meter of soil compacted to a void ratio of 0.8. In the vicinity of the proposed dam, three borrow pits were identified as having suitable materials. The cost of purchasing the soil and the cost of excavation are the same for each borrow pit. The only difference of the cost for each borrow pit is the cost of transportation. a. Borrow pit No. 1 2 3 Void Ratio Which borrow borrow economical? 1.8 0.9 1.5 Transportation Cost ($/m³) 0.6 1 0.75 pit pit would be would be the most
WA road section is 1200 m long. The cut and fill areas are to be computed between the station as shown in table below, determine the net volume of cut and fill between the stations, if you know that the material in fill will be consolidate by 12 percent after compaction. Given 100 m between each station. Station 0+00 2+00 4+00 6+00 8+00 10+00 12+00 1.0 5.0 Cut Fill 4.0 2.6 7.0 2.0 9.5 0.5 2.0 End Area (m2) 3.0 8.0 6.0