Barium titanate, a ceramic used in electronics, was analyzed by the following procedure: Into a Pt crucible was placed 1.2 g of Na₂CO3 and 0.8 g of Na₂B4O, plus 0.3124 g of unknown. After fusion at 1000°C in a furnace for 30 min, the cooled solid was extracted with 50 mL of 6 M HCl, transferred to a 100-mL volumetric flask, and diluted to the mark. A 25.00-mL aliquot was treated with 5 mL of 15% tartaric acid (which complexes Ti4+ and keeps it in aqueous solution) and 25 mL of ammonia buffer, pH 9.5. The solution was treated with organic reagents that complex Ba²+, and the Ba complex was extracted into CCl4. After acidification (to release the Ba²+ from its organic complex), the Ba²+ was back-extracted into 0.1 M HCl. The final aqueous sample was treated with ammonia buffer and methylthymol blue (a metal ion indicator) and titrated with 32.42 mL of 0.01376 M EDTA. Find the weight percent of Ba in the ceramic. weight percent of Ba: wt%

Barium titanate, a ceramic used in electronics, was analyzed by the following procedure: Into a Pt crucible was placed 1.2 g of Na₂CO3 and 0.8 g of Na₂B4O, plus 0.3124 g of unknown. After fusion at 1000°C in a furnace for 30 min, the cooled solid was extracted with 50 mL of 6 M HCl, transferred to a 100-mL volumetric flask, and diluted to the mark. A 25.00-mL aliquot was treated with 5 mL of 15% tartaric acid (which complexes Ti4+ and keeps it in aqueous solution) and 25 mL of ammonia buffer, pH 9.5. The solution was treated with organic reagents that complex Ba²+, and the Ba complex was extracted into CCl4. After acidification (to release the Ba²+ from its organic complex), the Ba²+ was back-extracted into 0.1 M HCl. The final aqueous sample was treated with ammonia buffer and methylthymol blue (a metal ion indicator) and titrated with 32.42 mL of 0.01376 M EDTA. Find the weight percent of Ba in the ceramic. weight percent of Ba: wt%

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

The % purity of a powdered crude sample of Na^2CO^3 containing only inert impurities is to be determined by reacting 225.0 mg of the crude sample to 10.0 mL of 3.00 M HCl solution, and bubbling the resulting CO2(g) product in water that is at exactly 29 °C. After the reaction has completed, the level of the liquid inside the eudiometer rests 4.30 cm above the water level in the beaker. The graduation on the eudiometer indicates that the trapped gas is 44.37 mL. The experiment was done under a barometric pressure of 755.2 torr. What is the % purity of the sample to the nearest whole number?
A 5.186 gram sample of the anti-malarial pesticide DDT was dissolved in 100.0 mL of alchohol and 10.00 mL aliquots were taken for analysis. One such aliquot was decomposed with metallic sodium, and the liberated chloride ion was precipitated as AgCl. Express the results of this analysis in terms of %DDT (C14H9Cl5, FW = 354.49) based on the recovery of 150 mg of AgCl (FW = 143.32).
The % purity of a powdered crude sample of Na^2CO^3 containing only inert impurities is to be determined by reacting 225.0 mg of the crude sample to 10.0 mL of 3.00 M HCl solution, and bubbling the resulting CO2(g) product in water that is at exactly 29 °C. After the reaction has completed, the level of the liquid inside the eudiometer rests 4.30 cm above the water level in the beaker. The graduation on the eudiometer indicates that the trapped gas is 44.37 mL. The experiment was done under a barometric pressure of 755.2 torr. Write the balanced chemical equation of the reaction in your solutions sheet. What is the sum of all the coefficients of the balanced chemical equation? Determine the pressure of the trapped gas inside the eudiometer in mmHg. Determine the partial pressure of the collected CO^2 in mm Hg. How many millimoles of CO^2 was collected? What is the % purity of the sample to the nearest whole number?
A 25.00mL wastewater sample was analyzed for its Mg2+ content using a standard gravimetric method. the sample was diluted to 3.00L and an 11.00mL aliquot was treated to precipitate magnesium as MgNH4PO4.6H2O using (NH4)2HPO4 as the precipitating agent. the precipitate was then filtered, washed, dried, and ignited resulting in a 0.1325mg Mg2P2O7 residue. How much Mg (in ppm) is present in the original sample
A newly-discovered iron ore was examined to determine percent iron in the ore gravimetrically. 5.408 grams of the ore samples was subjected to gravimetric analysis and precipitated as iron (III) oxide and dried at 105 degrees Celsius. What is the percent iron contentn of the ore if the mass of the precipitate is 0.3785 grams?
Predict three (3) correct apparatus used for the procedures experiment run by a chemist below. Determination of phosphorus in plant food will produced magnesium ammonium phosphate, MgNH4PO4.6H2O, precipitate. The precipitate was kept in a crucible and dry at 130 °C for 2 hours. Then, the precipitate was cooled for 15 minutes in a condition of low moisture atmosphere. The precipitate is weighed until constant weight is obtained.
An impure sample of calcium carbonate with a mass of 7.95 g was reacted with 50.00 cm3 of 1.00 mol dm hydrochloric acid (an excess). The resulling solution was transferred to a volumetric flask and titrated with 11.10cm3 of 0.300 mol dm-3 sodium hydroxide solution. Determine the percentage purity by mass of the calcium carbonate sample.CaCO3 + HCl -> CaCl2 + H2O + CO2 HCl + NaOH -> NaCl +H2O a. Determine how many moles of hydrochloric acid were used.b. Determine how many moles of excess HCI was titratedc. Determine how much in moles calcium carbonate present in the sample.d. Calculate the mass of calcium carbonate presente. Determine the percentwge calcium carbonate is in the sample.
In an experiment to determine the concentration of H2SO4 in a brand of toilet cleanser, 10.0 cm3 of the cleanser was first diluted to 250.0 cm3 with distilled water. 25.0 cm3 of the diluted cleanser were titrated with 0.320 mol dm–3 NaOH solution, using methyl orange as indicator.If 29.2 cm3 of NaOH solution is used, what is the concentration of H2SO4 in the undiluted toilet cleanser?a. 2.30 mol dm–3b. 4.60 mol dm–3 c. 9.20 mol dm–3 d. 11.50 mol dm–3
Zinc may be directly leached from zinc-lead sulphide concentrates by reaction with sulphuricPbS(s) + H2SO4 + 1 O2(g) → PbSO4(solid) + SÂ° + H2O 21ZnS(s) + H2SO4 + 2 O2(g) → ZnSO4(aq) + SÂ° + H2Oacid and oxygen. In addition, lead sulphide will be oxidized to give insoluble lead sulphate:Assume that a plant is to treat 400 t/day of concentrate containing 20.0 weight % Zn as ZnS and 110.0 weight % Pb and PbS. The concentrate and leach solution enters the leaching vessel at 32.0% solids. During the leach, 85.0% of the zinc is extracted and all the lead sulphide is oxidized. After the leaching step, the slurry passes to a thickener.(a) Calculate the concentration of Zn (in g/L) in the solution passing to metal recovery. Assume a solution density of 1.11 g/mL.(b) Calculate the tonnes per day of elemental sulphur produced.NOTE: â€œ% solidsâ€ is the solids content of a slurry (consisting of particles and solution) and is defined as…
Hydroxyapatite, Ca,(PO4),(OH)₂, has a solubility constant of Ksp = 2.34 x 10-59, and dissociates according to Cao (PO)(OH)₂ (s)10 Ca2 (aq) + 6PO (aq) + 2OH (aq) Solid hydroxyapatite is dissolved in water to form a saturated solution. What is the concentration of Ca2+ in this solution if [OH] is fixed at 3.40 x 10-4 M? [Ca²+] = M
A 1.250 g sample of bauxite (the primary ore of aluminum) was analyzed for aluminum. The sample was powderized and treated in concentrated nitric acid. The nitric acid was removed and solids were treated in hot water with added nitric acid. Insoluble solids were removed by gravity filtration. The solution was made basic by the slow addition of dilute ammonia forming the gelatinous precipitate (Al(OH), and Al,O,.x H2O). The precipitate was heated to coagulate it then filtered over filter paper. The paper and solids were placed in a porcelain crucible and the paper was ashed while the precipitate was ignited at 600°C to convert the precipitate to pure Al,O,. The mass of Al,O, recovered was 0.2890 g. The average mass of ash after charring 10 sheets of the identical filter paper was 0.0007 g. Calculate the percent aluminum in the bauxite ore sample.
Orthophosphate (PO4³) is determined by weighing as ammonium phosphomolybdate, (NH4)3PO4 •12MOO3. Calculate the percent P in the sample and the percent P2O5 if 1.1682 g precipitate (ppt) were obtained from a 0.2711-g sample. Perform the % P calculation using the gravimetric factor and just using dimensional analysis.