B: The pump in Fig. Q3B increases the pressure in the water from 200 to 4000 kPa with a flow rate of 0.1 m³/s? The electric power of motor 275 kW. Determine the mechanical efficiency of the pump and overall efficiency pump/motor unit when the motor efficiency is 90 percent. Fig. Q3B 50 mm Pump 100 mm € Water Motor

B: The pump in Fig. Q3B increases the pressure in the water from 200 to 4000 kPa with a flow rate of 0.1 m³/s? The electric power of motor 275 kW. Determine the mechanical efficiency of the pump and overall efficiency pump/motor unit when the motor efficiency is 90 percent. Fig. Q3B 50 mm Pump 100 mm € Water Motor

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A hydraulic pump delivers 14 litres per minute towards pressure of 200 bar.Find the following (a) Calculate the hydraulic power in watts (b) If the overall efficiency of the pump is given as 81% .Find the input of electric power to operate the pump in kW
2 for the system shown in Figure 2, the parameters of pump and motor are as 115mL/r , speed of pump Пр p max = follows: maximal displacement of pump 1mp = 0.9, total efficiency of pump 1000r/min, mechanical efficiency of pump V N mm m = 148mL/r, mechanical efficiency of motor = 0.84; displacement of motor %3D =0.9, total efficiency of motor Im = 0.84, the permitted maximum pressure in pipe Pr =8.3Mpa, if the pressure losses in pipeline is not considered, calculate: 1) Maximal speed of motor, and the output power and output torque at this speed 2) the input driving torque of pump Figure 2
Determine the pump head (unit: meter or kPa), using the following parameters
The water is flowing through a pipe having diameters 40 cm and 17 cm at sections 1 and 2 respectreely, The rate of flow through pipe is 45 liters / s .The section 1 is 7 m above datum and section 2 is 4.5 m above datum it the pressure at section 1 is 38.5 N /cm2. find the following by neglecting losses find: 1) Area of cross section of section 1 (UNIT in m2) 2) Area of cross section of section 2 (UNIT in m2) 3) Velocity head at section 1 (UNIT in m ) 4) difference in datum head (UNIT in m) 5) pressure at section 1 ( UNIT in N/m2) 6) pressure at section 2 ( UNIT in N/m2)
answer first item only
It's A Good Question . Help me Fast
Shown below is the water jet flow from a pressurized closed tank. The vertical distance between free surface and the jet nozzle is . The vertical distance between the highest point of the water jet and the jet nozzle is . The flow is steady and no energy loss is involved. The acceleration due to gravity is . The water's specific gravity is . Find the correct simplified Bernoulli's equation for point 1 and point 3________
B-A pump has the following parameters N=2133.5 RPM, Ns = 40 RPM, D= 37.1 cm and is used to pump water up to 90 m(H) at maximum efficiency operation: write the answer only (a) At what speed should the pump be operated to pump water up to (76 m)? (b) What is the discharge in each case? (c) What is pumping power needed in each case? (d) What is consumed electrical power in each case if max = 90%? e- A pump discharges liquid at the rate of Q against a head of H. If specific weight of the liquid is w, find the expression for the pumping power.
Sketch and discuss in great detail the different pump curves including supply curve, system curve and efficiency curve.
h. Thirty (30) liters/second of stream water must be pumped up a vertical height of 12 meters to irrigate a farm. If head loss in casing and pump results in 62% pump efficiency and the electric motor used has 91% efficiency, what horsepower rating should the motor have and how many kilowatts will it use while pumping?
В4. An orifice meter with orifice area 945 mm2 is inserted in a pipe of area 1890 mm2 The pressure gauges fitted upstream and downstream of the orifice meter gives readings of 245 N/cm2 and 85 N/cm2 respectively. Co-efficient of discharge for the orifice meter is given as 0.54. Find the discharge of water through pipe. Head of water (in m) The discharge of water through pipe (in Litres/sec)
Shown below is the water jet flow from a pressurized closed tank. The vertical distance between free surface and the jet nozzle is . The vertical distance between the highest point of the water jet and the jet nozzle is . The flow is steady and no energy loss is involved. The acceleration due to gravity is . The water's specific gravity is . Find the correct simplified Bernoulli's equation for point 2 and point 3________