(b) An earth embankment is to be constructed. The soil is to be compacted at maximum dry density of 18 kN/m³ at optimum moisture content = 15%. The in-situ bulk density and water content in borrow pit are 17 kN/m³ and 8% respectively. How much excavation should be carried out in the borrow pit for each cubic meter of embankment? Assume: G = 2.7; Y₁ = 10 kN/m³.

(b) An earth embankment is to be constructed. The soil is to be compacted at maximum dry density of 18 kN/m³ at optimum moisture content = 15%. The in-situ bulk density and water content in borrow pit are 17 kN/m³ and 8% respectively. How much excavation should be carried out in the borrow pit for each cubic meter of embankment? Assume: G = 2.7; Y₁ = 10 kN/m³.

Principles of Foundation Engineering (MindTap Course List)

8th Edition

ISBN:9781305081550

Author:Braja M. Das

Publisher:Braja M. Das

Chapter16: Soil Improvement And Ground Modification

Section: Chapter Questions

Problem 16.12P

See similar textbooks

Similar questions

For constructing an embankment, the soil is transported from a borrow area using a truck which can carry 6m³ of soil at a time. The details are as follows. Borrow Truck Field Property area (loose) (compacted) Bulk density 1.66 1.15 1.82oile (g/cc) Water 8 14 content (%) The quantity of soil to be excavated from the borrow pit, in m3 for a compacted earth fill of 100 m3 is
Q: A proposed earth dam requires 7500 m of compacted soil with relative density of 94% , maximum void ratio of 0.73, minimum void ratio of 0.4 and specific gravity (Gs) = 2.67. Two borrow pits are available as described in the following table. Choose the best borrow pit with minimum cost. Cost ($/m) Degree of saturation (%) 82 Borrow Pit Water content (%) A 18.43 10 B 100 24.34
The excavated material has a wet unit weight of 1,510 kg/ cu metre and a dry unit weight of 1,398 cu metre. The material will be used to build an embankment. According to specification, the dry unit weight of the compacted material should be 1,826 kg/ cu metre, with a water content of 12%. The net section of the embankment is 86,000 cu metre. What is the moisture content of the excavated soil? How many cu metre of excavation will be required to construct the embankment? Do we need to add water or not? If yes, what’s the volume of added water?
Earth is required to be excavated from the borrow pits for building embankment as shown in the figure. The moisture unit weight of the borrow pits is 18 kN/m3 and its water content is 8%. Estimate the quantity of earth required to be excavated per meter length of embankment. The dry unit weight required for the embankment is 15 kN/m3 with a moisture content of 10%. Assume the specific gravity of the solids as 2.67. Also determine the degree of saturation of the embankment and volume of the water in the embankment 2m- Embankment 4 m
QUESTION 1: PHASE RELATIONS a. The bulk unit weight and water content of a soil at a borrow pit are 17.2 kN/ml and 8.2% respectively. A highway fill is being constructed using the soil from this borrow at a dry unit weight of 18.05 kN/m³. Find the volume of the borrow pit that would make one cubic meter of the finished highway fill. b. A soil to be used in the construction of an embankment is obtained by hydraulic dredging of a nearby canal. The embankment is to be: placed at a dry density of 1.72 t/m³ and will have a finished volume of 20,000 m³. The in situ saturated density of the soil at the bottom of the canal is 1.64 t/m³. The effluent from the dredging operation, having a density of 1.43 t/m³, is pumped to the embankment site at the rate of 600 L per minute. The specific gravity of the soil grains is 2.70. i. ii. How many operational hours would be required to dredge sufficient soil for the embankment? what would be the volume of the excavation at the bottom of the canal? c. A…
Q5-A proposed earth dam requires 7500 m³ of compacted soil with relative density of 94%, maximum void ratio of 0.73, minimum void ratio of 0.4 and specific gravity (Gs)= 2.67. Two borrow pits are available as described in the following table. Choose the best borrow pit with a minimum cost. Borrow Pit A B Degree of saturation % 82 100 Moisture content % 18.43 24.34 Cost ($/m³) 10 5
Your company has won a contract to provide and compact the fill material for an earth levee (an embankment built to prevent overflow of a river), with the dimensions shown below. The levee fill is a silty clay soil to be compacted to atleast 95.1% of maximum standard Proctor of dry unit weight= 109lb/cu.ft at an OMC of 18.6%. Your borrow pit has a silty clay with an in-situ moist density of 112.6lb/cu.ft at 18.1% water content and a Gs = 2.679. When the soil is excavated and loaded on to your trucks, the void ratio of the material is e = 1.46. Your trucks can haul 401 cu.ft of material per trip. DETERMINE THE FF AND SHOW COMPELETE SOLUTION. ALL FINAL ANSWER WILL BE IN 3 DECIMAL PLACES. 1. Determine the volume of fill required for the levee in cu.ft 2. Determine the volume required from the borrow pit in cu.ft 3. Determine the required number of truck loads.
5. The coefficient of permeability of a sand at a void ratio of 0.62 is 0.03 cm/sec. Estimate the coefficient of permeability at a void ratio of 0.48. Using Casagandre equation Using Kozeny-Carman equation Find the difference in the rate of flow using the results of “a” and “b” if i = 0.70 and A = 0.6 m2.
Earth is required to be excavated from the borrow pits for buildingembankment as shown in the figure. The moisture unit weight ofthe borrow pits is 18 kN/m3 and its water content is 8%. Estimatethe quantity of earth required to be excavated per meter length ofembankment. The dry unit weight required for the embankment is15 kN/m3 with a moisture content of 10%. Assume the specificgravity of the solids as 2.67. Also determine the degree ofsaturation of the embankment and volume of the water in theembankment
1. A proposed earth dam requires 4500 m³ of compacted soil with a void ratio, e = 0.47 and specific gravity (Gs)=2.76. Two borrow pits are available as described in the following table. Choose the best borrow pit with minimum cost. Borrow Pit A B Degree of Saturation % 92 96 Moisture Content% 20.43 22.34 Cost ($/m³) 8 6
4. With two cases shown in the following figure: Plot pore pressure with depth for the soils if hydraulic conductivity of soils K1 = 5 x K2. a- b- flow through a unit thickness of the cross-section if K1 = 5 x 10$ (f/s) and K2 = 1 x 10$ (f/s). Estimate the rate of seepage (q) per linear foot of cross-section, i.e. calculate the rate of C- Plot flow net for 2 cases. -z (ft) z (ft) Water Water 3 ft 3 ft Soil 1 1.5 ft Soll 1 Sol 2 3 ft 3 ft 3 ft 1.5 ft Soil 2 Datum psf Datum psf porous stone porous stone 3 ft 1.5 ft 1.5 ft Case 1 Case 2
Earth is required to be excavated from borrow pits for building an embankment as shown in the figure below. The moisture unit weight of the borrow pits is 18 kN/m³ and its water content is 8%. Estimate the quantity of earth required to be excavated per meter length of embankment. The dry unit weight required for the embankment is 15 kN/m³ with a moisture content of 10%. Assume the specific gravity of solids as 2.67. Also determine the degree of saturation of the embankment soil and the volume of water in the embankment. (hint: Volume of emankment per meter length) |--2m- 4 m Embankment