As a technical engineer in the army, you are part of a team in charge of testing and commissioning a new tank recently purchased by the artillery. Field testing has revealed the following information: 1) The tank moves from rest to a speed of 70 km/hr in 10 seconds. 2) Using the breaking system, the tank is brought to a complete stop from a speed of 70 km/hr in 5 seconds. You are required to address all the questions below providing all calculations, graphs, and explanations as appropriate to back your answers. First: Motion of the tank: a) Find the average driving acceleration of the tank. b) Calculate the average breaking acceleration of the tank. c) For parts (a) and b above parts report your answers in US Customary Units (mile/hr) so that the information could be shared with experts from the US.

As a technical engineer in the army, you are part of a team in charge of testing and commissioning a new tank recently purchased by the artillery. Field testing has revealed the following information: 1) The tank moves from rest to a speed of 70 km/hr in 10 seconds. 2) Using the breaking system, the tank is brought to a complete stop from a speed of 70 km/hr in 5 seconds. You are required to address all the questions below providing all calculations, graphs, and explanations as appropriate to back your answers. First: Motion of the tank: a) Find the average driving acceleration of the tank. b) Calculate the average breaking acceleration of the tank. c) For parts (a) and b above parts report your answers in US Customary Units (mile/hr) so that the information could be shared with experts from the US.

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Field testing has revealed the following information:1) The tank moves from rest to a speed of 50 ??/ℎ? in 100 seconds.2) Using the breaking system, the tank is brought to a complete stop from a speed of 50 ??/ℎ? in 5 seconds.3) The maximum speed achievable by the tank is 90 km/hr.You are required to address all the questions below providing all calculations, graphs, and explanations asappropriate to back your answers. Hint: make sure you are using consistent unitsFirst: Motion of the tank: d) How long would it take the tank to travel a distance of 12 km. Assume constant acceleration equal to that calculated inpart (a) up to the maximum achievable speed of 90 km/hr after which the tank maintains its speed constant.e) For the motion described in part (d) above, find the expressions for the acceleration, velocity and the position of thetank as a function of time. Draw x(t), v(t), and a(t) for the entire 12 km trip. Assume motion is one dimensional alongthe x-axis starting from rest at…
According to Timothy Treadwell in 2001 "Now, the bears I live with average, the males are on average twelve hundred pounds. They're the largest bears in the world and they've been clocked at 41 [mph] and they've run a hundred meter dash in 5.85 seconds which human on stimulants doesn't even approach. a. Compute the speed of a grizzly bear using Mr. Treadwell's hundred-meter statement. b. Compute the momentum of a grizzly bear using the speed you calculated in part a. and the average mass stated by Mr. Treadwell. c. How fast would a 250 lb man have to run to have the same momentum you calculated in part b? d. How fast would a 4000 lb car have to drive to have the same momentum you calculated in part b?
Please answer #18 Analyze the problems carefully, then solve them. Be systematic when answering. Write the given, label them; the required; and all calculations pertinent to the problem. Express your numerical answers with the appropriate number of significant figures.
You have been provided with specifications for case materials in the table below. However, you may also use your own figures for the mass of phones and test case materials. As you use this data, ensure that you have made the necessary SI unit conversions: Test Material Mass Collision TimePhone only (no case) 6.2 oz. 0.01 secondsSilicone 1.7 oz. 0.05 secondsHard Plastic 1.1 oz. 0.03 secondsRubber 3.2 oz. 0.08 seconds As the researcher, you will choose a drop height of between 1 and 2 meters. Using the provided mass of 6.2 oz, or by measuring the mass of a personal cell phone, determine the mass you will be using for your calculations. Remember to add the mass of the case material. 1) Using Newton’s second law, calculate the force of impact for each scenario.
Solve the following questions and show clear and organized solutions. Thanks!!!Note: The answer is already given on the bottom side of the problem, just show the solution on how to get it.
You have been provided with specifications for case materials in the table below. However, you may also use your own figures for the mass of phones and test case materials. As you use this data, ensure that you have made the necessary SI unit conversions: Test Material Mass Collision TimePhone only (no case) 6.2 oz. 0.01 secondsSilicone 1.7 oz. 0.05 secondsHard Plastic 1.1 oz. 0.03 secondsRubber 3.2 oz. 0.08 seconds As the researcher, you will choose a drop height of between 1 and 2 meters.Using the provided mass of 6.2 oz, or by measuring the mass of a personal cell phone, determine the mass you will be using for your calculations. Remember to add the mass of the case material. Use the information provided in your case specification document to calculate the velocity before impact and deceleration at impact. Remember that deceleration…
You have been provided with specifications for case materials in the table below. However, you may also use your own figures for the mass of phones and test case materials. As you use this data, ensure that you have made the necessary SI unit conversions: Test Material Mass Collision TimePhone only (no case) 6.2 oz. 0.01 secondsSilicone 1.7 oz. 0.05 secondsHard Plastic 1.1 oz. 0.03 secondsRubber 3.2 oz. 0.08 seconds As the researcher, you will choose a drop height of between 1 and 2 meters. Using the provided mass of 6.2 oz, or by measuring the mass of a personal cell phone, determine the mass you will be using for your calculations. Remember to add the mass of the case material. 1) Following the creation of the force diagram, use the information provided in your case specification document to calculate…
solve question 10. it goes with the problem above it.
The given graph shows stopping distances for trucks at various speeds on dry roads and on wet roads. Use this information to solve, a. Use the statistical menu of your graphing utility and the quadratic regression program to obtain the quadratic function that models a truck’s stopping distance, f(x), in feet, on wet pavement traveling at x miles per hour. Round the x-coefficient and the constant term to one decimal place. b. Use the function from part (a) to determine speeds on wet pavement requiring stopping distances that exceed 446 feet.
Consider the following examples and try to imagine the possible scenario that may happen. To do so, fill in the provided outline after each example, and then, complete the general statement below
Prof. K. lives on a steep hill and wants to conduct a Dynamics experiment with her car. She starts function of velocity and is described by the equation a = 3.22 - 0.04v² where v is the velocity of her car in ft/sec. Help Prof. K. predict the velocity of her car at the bottom of the grade in mph. from rest at the top of the hill and releases the brakes. Her acceleration down the grade is a 600' B
You are handed a bat that is 6 times as dense on one side as it is on the other side, and 3 times as dense in the middle as it is on the least dense side. Density varies quadratically. The mass of the bat is M and the length is L. Write your answers only in terms of these constants. > Place the rod somewhere along the x-axis. What is the linear mass density function A(x) of the rod? Hint: To eliminate a constant, note that integral dm=M