Which factor MOST affects the ability of human skin to act as a conductor?O TemperatureO MoistureO AltitudeO AgeSemiconductors, such as silicon, are enhanced to increase conductivity through which process?O DopingO AnnealingO lonizationO ElectrolysisWhat is the MAXIMUM number of modules allowed in a string with the following "STC" module specifications and conditions?Voc: 80.8Vmp: 62.7Temperature coefficlent (Voc): -0.28%/CMaximum System Voltage: 600 VRecord cold temperature at the site: -10°CFor mounting on a sloped roof, which is an approved method of structural attachment where trusses or rafters are not conveniently located?Use lag bolts secured to the plywood sheathing.Use roofing cement between structure pads and roof.Add blocking between the trusses.Increase the span between attachment points.10)What is the MOST important factor when determining the maximum fuse size allowed on a PV source circuit?O Length of the wire to the combiner boxO Ampacity of the wire to the combiner boxO Combiner box manufacturer's fuse ratingO PV module manufacturer's series fuse ratingAAJUNtv25

As per the policy ,I am able to answer only one question. 1)As water is pure conductor of…

Answered: an Skin O Temperature O Moisture O…

Engineering

Electrical Engineering

an Skin O Temperature O Moisture O Altitude O Age

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A cylindrical 4 AWG copper wire is coated with NEMA class A insulation. The normal operating temperature of the wire is 50°C. What is the maximum current the wire can carry for 1 second without exceeding the NEMA temperature rating?
Describe and briefly explain the functions of the following Electrical Components. Insulator Conductor Raceway DC Circuit AC Circuit
1- A). Which of the following could be used as a discharge device in an inductive AC circuit? a) resistor b) diode c) metal oxide varistor d) "a" and "c", not "b" B. What is the purpose of a discharge device used in conjunction with opening a highly inductive circuit? a) to minimize the possibility of damage to the circuits insulation as a result of a high induced voltage b) to minimize the possibility of endangering the life of the person opening the controlling switch c) to allow the magnetic field to gradually collapse, thus limiting the value of the self-induced ernf d) all of the above C. The high voltage induced by an inductor when its circuit is opened could be used constructively for a) an automotive ignition system b) an electric fence c) both "a" and "b" d) neither "a" nor "b"
A cylindrical 00 AWG copper wire is coated with NEMA class B insulation. The normaloperating temperature of the wire is . What is the maximum current the wire can carry for 1second without exceeding the NEMA temperature rating?
what is conduction current density
A typical Cu wire might have 2 X 1021 free electrons in 1 cm of its length. Suppose that the drift velocity of the electrons along the wire is 0.05 cm/s. (A) How many electrons would pass through a given cross section of the wire each second? (B) How large a current would be flowing in the wire? outz mduz to elob beluberlba ol uoy wollo liw ainf.nokaimdu2 to etob beluberoz edt elin M? niy ina lona
Nichrome ribbon resistor elements each has a resistance of 1 ohm. The element is made from sheet of nichrome alloy, 0.025cm thick. If the width of the ribbon is 0.3cm, what length is required per element? Assume specific resistance of nichrome allow to be 109micro ohm-cm.
Please choose the correct answer and explain if possible. Thank you. 4. The main terminal voltage across an ON conducting SCR depends on the instantaneous main terminal current in the following way: a. They are proportional b. The voltage increases as the current increases, but no quite proportionally c. The voltage increases as the current increases, by a squared (seond power) relationship d. They are virtually non-related 5. To turn Off a conducting SCR in a dc-powered circuit, it is necessary to: a. Interrupt (stop) the gate current b. Wait for the main terminal current to fall below IHO when the supply voltage crosses through zero c. Deliver a pulse of negative gate current via the gate lead d. Place a temporary reverse bias across the SCR’s main terminals 6. In a simple RC charging circuit used for trigger-control of an SCR, a good range of adjustment of the RC time-constant is: a. 1 to 5 msec b. 1 to 30 msec c. 0.1 to 10 msec d. 2 to 25 μsec
String insulator question
10) A certain batch of copper wire was found to have a conductivity of 98% at 20°C. What is its resistivity in uQ-cm?
What is the conductivity of AWG #32 tungsten wire with a resistance of 0.0172 Q/cm? The diameter of AWG #32 is 8.0 mils. Ans. 17.9 MS/m 6.34.
The reverse voltage blocking capacity of a GTO is small due to the presence of______________. a. anode opens b. cathode opens c. anode shorts d. cathode shorts