An insulated container is partly filled with oil. The lid of the container is removed, 0.150 kg of water heated to 84.0°C is poured in, and the lid is replaced. As the water and the oil reach equilibrium, the volume of the oil increases by 1.00x105 m³. The density of the oil is 919 kg/m³, its specific heat capacity is 1980 J/(kg-C°), and its coefficient of volume expansion is 726x106 (Cº)-¹. What is the temperature when the oil and the water reach equilibrium? Number i Units

An insulated container is partly filled with oil. The lid of the container is removed, 0.150 kg of water heated to 84.0°C is poured in, and the lid is replaced. As the water and the oil reach equilibrium, the volume of the oil increases by 1.00x105 m³. The density of the oil is 919 kg/m³, its specific heat capacity is 1980 J/(kg-C°), and its coefficient of volume expansion is 726x106 (Cº)-¹. What is the temperature when the oil and the water reach equilibrium? Number i Units

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter19: Temperature, Thermal Expansion And Gas Laws

Section: Chapter Questions

Problem 19PQ

See similar textbooks

Similar questions

At 25.0 m below the surface of the sea, where the temperature is 5.00C, a diver exhales an air bubble having a volume of 1.00 cm3. If the surface temperature of the sea is 20.0C, what is the volume of the bubble just before it breaks the surface?
Two concrete spans that form a bridge of length L are placed end to end so that no room is allowed for expansion (Fig. P16.63a). If a temperature increase of T occurs, what is the height y to which the spans rise when they buckle (Fig. P16.63b)?
For a temperature increase of 10 at constant volume, what is the heat absorbed by (a) 3.0 mol of a dilute monatomic gas; (b) 0.50 mol of a dilute diatomic gas; and (c) 15 mol of a dilute polyatomic gas?
One of a dilute diatomic gas occupying a volume of 10.00 L expands against a constant pressure of 2.000 atm when it is slowly heated. If the temperature of the gas rises by 10.00 K and 400.0 J of heat are added in the process, what is its final volume?
An aluminum rod 0.500 m in length and with a cross-sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 300 K. (a) If one-half of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool. (b) If the circular surface of the upper end of the rod is maintained at 300 K, what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 W/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)
One way to cool a gas is to let it expand. When a certain gas under a pressure of 5.00 106 Ha at 25.0C is allowed to expand to 3.00 times its original volume, its final pressure is 1.07 106 Pa. (a) What is the initial temperature of the gas in Kelvin? (b) What is the final temperature of the system? (See Section 10.4.)