An ideal Otto engine, operating on a hot air standard with k = 1.34, has a compression ratio of 5.At the beginning of compression the volume is 6 ft^3, the pressure is 13.75 psia and thetemperature is 100 deg F. During the constant volume heating, 340 BTU are added per cycle.Find:a) T3b) P3c) eA four stroke cycle, 4 cylinder reciprocating engine with a speed of 1800 rpm has a stroke of 8inches and a cylinder bore diameter of 6 inches. The mean effective pressure inside the cylinderis 200 psi and the mechanical efficiency is 80%. Determine:a. Piston displacementb. No. of cycles per minuteС.IHPd.BHPe.FHP

Dear student, According to the guidelines I am allowed to answer only one…

An ideal Otto engine, operating on a hot air standard with k=1.34, has a compression ratio of 5. At the beginning of compression the volume is 6 ft^3, the pressure is 13.75 psia and the temperature is 100 deg F. During the constant volume heating, 340 BTU are added per cycle. Find: a) T3 b) Р3 c) e

An ideal Otto engine, operating on a hot air standard with k=1.34, has a compression ratio of 5. At the beginning of compression the volume is 6 ft^3, the pressure is 13.75 psia and the temperature is 100 deg F. During the constant volume heating, 340 BTU are added per cycle. Find: a) T3 b) Р3 c) e

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

At the beginning of compression, Otto cycle works on 0.2 lb/s of air at 17 psia and 100F. The temperature at the completion of combustion is 4000 R, the compression ratio is 5.5, and the hot-air standard is k = 1.37.a) Find V1 ,P2 , T2 , P3 , V3 , T4b) Compute QA, QR , W , e
The compression ratio of an Otto cycle is 8, at the beginning of the zanthropic compression process, the pressure of the air is 100 kPa, the temperature is 27 "C, the volume is 550 cm. At the end of the lzantropic expansion process, the temperature of the air is 700 K. Using the specific temperature values at room temperature (according to the cold air standard assumptions) Find the gravity of the air.
In an ideal Ericsson cycle with a regenerator the pressure ratio is 2.5. The pre-compression pressure is 0.5 Mpa, and the maximum and minimum volumes are 0.02 m ^ 3 and 0.005 m ^ 3, respectively. Since there is 0.06 kg of air in the cycle: a) pre-compression volumeb) compression end pressurec) minimum temperatured) Find the efficiency of the cycle. R = 0.287 kj / kh.K
Answer letters D, E, F
A power plant uses steam flowing at 75kg/s to perform power cycle. Both the turbine and the pump operate adiabatically and without irreversibilities. a) find quality at the turbine exit b) find mass flow rate (kg/s) of cooling water through the condenser c) find efficiency of the cycle d) plot the cycle on a T-s diagram, indicate the saturation curve and each state of the working fluid.
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Va = 2.2L. At the beginning of compression, Pi = 95 kPa, and T = 290 K. The heat addition is 5 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various state, in K. b) the net work of the cycle, in kl. c) the power developed at 3000 cycles per minute, in kW. d) the thermal efficiency. e) the mean effective pressure, in kPa.
Having difficulty with this engineering problem. At the beginning of the compression process of an air standard Otto cycle, p1 = 1 bar, T1 = 300 K. The maximum temperature in the cycle is 2250 K and the compression ratio is 9.8. The engine has 4 cylinders and an engine displacement of Vd = 2.1 L. Determine per cylinder: a) the volume at state 1 in L.b) the air mass per cycle.c) the heat addition per cycle, in kJ.d) the heat rejection per cycle, in kJ.e) the net work per cycle, in kJ.f) the thermal efficiency.g) the mean effective pressure, in bar.h) Develop a full exergy accounting per cycle, in kJ. Let T0 = 300 K, p0 = 1 bar.i) Devise and evaluate the exergetic efficiency for the cycle.
A standard Diesel air cycle receives 30 kJ of heat per cycle while running at 310 rpm. At the beginning of compression the conditions are 120 kPa, 315 ° K and 0.045 m3. At the beginning of the heat addition, the pressure is 3550 kPa. Determine: a) P, V, T for each state of the cycle. b) The work done. c) The developed power. d) Mean effective pressure
In a gasoline engine with a compression ratio of 9, the compression process At the beginning, the pressure of the air is 100 kPa and the temperature is 300 K. Heat made into the cycle If the transfer is 1310 kJ/kg, a) Calculate the highest temperature and pressure of the cycle. b) Find the thermal efficiency of the cycle. c) Find the average effective pressure of the cycle, kPa. Note: Specific heats are constant.
Inlet temperature 80
A Brayton cycle with an air-powered regenerator has a pressure ratio of 8. The lowest and highest temperatures of the cycle are 310 K and 1150 K. The adiabatic efficiencies of the compressor and turbine are 75% and 82%, respectively. The efficiency of the regenerator is 65%. Draw the T-s diagram of the cycle. a) The temperature of the air at the turbine exit, b) the net work of the cycle, c) Calculate the thermal efficiency of the cycle. Consider the variation of specific heats with temperature.
At the beginning of the compression process of an air standard Otto cycle, p₁ = 1 bar, T₁ = 300 K. The maximum temperature in the cycle is 2250 K and the compression ratio is 9.8. The engine has 4 cylinders and an engine displacement of V₁ = 2.6 L. Determine per cylinder: a) the volume at state 1. b) the air mass per cycle. c) the heat addition per cycle, in kJ. d) the heat rejection per cycle, in kJ. e) the net work per cycle, in kJ. f) the thermal efficiency. g) the mean effective pressure, in bar. h) Develop a full exergy accounting per cycle, in kJ. Let To = 300 K, Po = 1 bar. i) Devise and evaluate the exergetic efficiency for the cycle. Understand air-standard Otto cycle Which statement is true for this air-standard Otto cycle? O Heat is added to the air at constant volume. O Heat is added to the air at constant pressure. O Heat is rejected from air at constant pressure. O None of the answers provided.