An eccentric cam of eccentricity 3.75 cm drives a follower of mass 1.75 kg. The spring holding the follower against the cam has stiffness of 24 N/mm and has initial compression of 3.125 cm. It is observed that jump occurs at cam rotation 100° from the lowest position of the cam. Find out the speed of cam in rpm. Also find out maximum usable speed of cam without jump.

An eccentric cam of eccentricity 3.75 cm drives a follower of mass 1.75 kg. The spring holding the follower against the cam has stiffness of 24 N/mm and has initial compression of 3.125 cm. It is observed that jump occurs at cam rotation 100° from the lowest position of the cam. Find out the speed of cam in rpm. Also find out maximum usable speed of cam without jump.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An eccentric cam of eccentricity 35 mm drives a follower of mass 1.8 kg. The spring holding the follower against the cam has stiffness of 25 N/mm and has an initial compression of 35 mm. It is observed that jump occurs at rotation of cam of 110° from the lowest position of the cam. Find out the speed of the cam in rpm. Also find out maximum useable speed of cam without jump.
A cam have the following specifications: Follower to move outward through 5 cm during 90° of cam rotation, it dwells for the next 60°. The follower then return to its original position through an angle 0R and then dwell for the rest of the cam rotation of 110°. The displacement of the follower is to take place with constant speed motion during both the outward and return strokes. The least radius of the cam is 4 cm. If the cam rotates at 300 r.p.m., construct the displacement, velocity and acceleration diagrams. Also determine The displacement, velocity, acceleration and the pressure angle for the following angles (40°, 75°, 145°, 200°).
A cam drives a flat reciprocating follower in the following manner. During the first 90° rotation of the cam, the follower moves outward through a distance of 30 mm with SHM. The follower dwells during next 90° cam rotation. During the next 90° cam rotation, the follower moves inward with SHM. The follower then dwells next 90° cam rotation. Draw the cam profile and calculate the maximum values of velocity and acceleration when cam rotates at 10 rad/s.
Please answer the question in 5mins I will rate your answer. Cam mechanisms are used in many machines. For example, cams open and close the valves in your car engine to admit gasoline vapor to each cylinder and to allow the escape of exhaust. The principle is illustrated in the figure below, showing a follower rod (also called a pushrod) of mass m resting on a wedge of mass M. The sliding wedge duplicates the function of a rotating eccentric disk on a camshaft in your car. Assume that there is no friction between the wedge and the base, between the pushrod and the wedge, or between the rod and the guide through which it slides. When the wedge is pushed to the left by the force F, the rod moves upward and does something such as opening a valve. By varying the shape of the wedge, the motion of the follower rod could be made quite complex, but assume that the wedge makes a constant angle of ? = 19.0°. Suppose you want the wedge and the rod to start from rest and move with constant…
I. 10 Q2/ Answer by using true or false 1-The offset defined as distance between center of Basic Circle and line tangent of inner Circle of the cam. * False True 2- To balancing of rotation mass system of the same plane we need to addition two masses. False True 3-There are two type of the displacement diagram of cam are simple harmonic motion and uniform motion. * False True 4-There are two methods to solve the balancing of rotation mass are analytical and evnerimantal II
The following particulars relate to a symmetrical circular cam operating a flat-faced follower : Least radius = 25 mm ; nose radius = 8 mm, lift of the valve = 10 mm, angle of action of cam = 120°, cam shaft speed = 1000 r.p.m. Determine the flank radius and the maximum velocity, acceleration and retardation of the follower. If the mass of the follower and valve with which it is in contact is 4 kg, find the minimum force to be exerted by the spring to overcome inertia of the valve parts. [Ans. 88 mm ; 1.93 m/s, 690.6 m/s, 296 m/s ; 1184 N]
The following particulars relate to a symmetrical circular cam operating a flat-faced follower : Least radius = 25 mm ; nose radius 120°, cam shaft speed = 1000 r.p.m. = 8 mm, lift of the valve = 10 mm, angle of action of cam = %3D Determine the flank radius and the maximum velocity, acceleration and retardation of the follower. If the mass of the follower and valve with which it is in contact is 4 kg, find the minimum force to be exerted by the spring to overcome inertia of the valve parts. [Ans. 88 mm ; 1.93 m/s, 690.6 m/s², 296 m/s² ; 1184 N]
Q3/Draw the displacement and profile of a cam operating a knife-edge follower when the axis of the follower is not passing through the axis of cam shaft but in offset by 25 mm from the axis of the cam shaft: fas Follower to move outwards through 50 mm during 70" of cam rotation, (b) Follower dwell for the next 50", (c) Follower to return to its original position during next 90", (d) Follower to dwell for the rest of the cam rotation The displacement of the follower is to take place with uniform acceleration and uniform retardation during both the outward and the return strokes. The least radius of cam 50 mm
2. Design a cam turning counterclockwise, to give a reciprocating follower move vertically the following motion: rise of 8 cm. with a SHM motion during 150⁰ rotation of the cam; rest for 45° decelerate UARD motion during 120° rotation of the cam 2.1Use knife edge 2.2 Roller type follower, diameter of roller follower 2cm
Draw the profile of a cam operating a roller reciprocating follower and with the following data: Minimum radius of cam =25 mm; lift=30mm; Roller diameter= 15mm. The cam lifts the follower for 120° with SHM, followed by a dwell period of 30. Then the follower lowers down during 150° of cam rotation with uniform acceleration and retardation followed by a dwell period. If the cam rotates at a uniform speed of 150 RPM. Calculate the maximum velocity and acceleration of follower during the descent period
6.7 A plate cam with a reciprocating follower is to rotate clockwise at 400 rev/min. The follower is to dwell for 60° of cam rotation, after which it is to rise to a lift of 2.5". During 1" of the return motion, it must have constant velocity of -40 in/s. Recommend standard cam motion from Sec. 6.7 to be used for high-speed operation, and determine the corresponding lifts, and cam rotation angles for each segment of the cam.
The displacement diagram of a radial plate cam with a knife edge follower is shown in Fig. 1. If the cam rotates at 6 rev per min, determine the time that it takes to Rise Dwell after the rise ay Return Dwell after the return Make one complete rotation C b B Out stroke-Del-Return stroke-Duel G H C D E F A12345 120 30 K Fig. 1 NP a 123456 120 20 mm