An 135-pole d.c. shunt generator with wave wound armature having 620 conductors, has to supply a load of 170 lamps each of 135W at 235 v. The flux per pole is 22 mWb and Ra = 2 ohms, Rsh=70ohms. What will be the load current and e.m.f generated. Consider brush drop of 1.6v/brush. Load Current Generated EMF

An 135-pole d.c. shunt generator with wave wound armature having 620 conductors, has to supply a load of 170 lamps each of 135W at 235 v. The flux per pole is 22 mWb and Ra = 2 ohms, Rsh=70ohms. What will be the load current and e.m.f generated. Consider brush drop of 1.6v/brush. Load Current Generated EMF

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

The emf generated in each conductor of a 6-pole simplex wave armature winding is 0.48 V. If the armature has 42 slots and 125 commutator segments, and there are four turns per armature winding element, find the terminal voltage of the generator. a. 288 V b. 264 V c. 192 V d. 240 V
An 135-pole d.c. shunt generator with wave wound armature having 620 conductors, has to supply a load of 170 lamps each of 135W at 235 v. The flux per pole is 22 mWb and Ra = 2 ohms, Rsh=70ohms. What will be the load current and e.m.f generated. Consider brush drop of 1.6v/brush. Load Current Generated EMF In DC generators brushes are used for
A small single-phase 60 Hz transformer has 10.2 W at no load. The core has a volume of 750 cm3. The maximum flux density is 10,000 G and the hysteresis constant of the core is 0.0005. Using the Steinmetz law on hysteresis loss, find the eddy current loss.
The terminal voltage of a 150 kW series generator is 600 V at rated load. The armature resistance is 0.06 ohms and the series field resistance is 0.04 ohms. Find generated emf.
A three-phase, 4-pole, 1,500 rpm alternating having a double layer-windings with 18 turns per coil. The slots per pole per phase are 10 and the coil span is 22 slots. The spread phase is 60 degrees and the flux per pole is 0.0625 Weber. If the armature windings are wye connected. a) Determine the generated voltage per phase and the line to line voltages. b) If the alternator is delivering a three - phase load of 1,200KW at 0.8 lagging power factor what is the line current of the alternator
A 6 pole wave wound d.c. shunt generator has 500 conductors. A generator delivers 50 kW of power at 250 voltage at full load. The resistance of the field circuit is 125 2. Actual brush shift is 10°. Then find the demagnetizing and cross magnetizing ampere turns per pole and how many additional turns must be wound on each pole to eliminate the demagnetizing effect.
A) :) Name two types of Transformer equivalent circuit and then compare them. B) !. ) Explain why do we need a B-H curve when we solve a parallel magnetic circuit in which one of the fluxes is given. BI Ff E E E E
For operation at 60 Hz and a given peak flux density, the core loss of a given core is 1W due to hysteresis and 0.5W due to eddy currents. Estimate the core loss for 400-Hz operation with the same peak flux density.
1.) A 6-pole, 3-phase, 60-Hz alternator has 12 slots per pole and four conductors per slot. The winding is 5/6 pitch. There are 0.025 Wb entering the armature from each north pole, and this flux is sinusoidally distributed along the air gap. The armature coils are all connected in series. The winding is wye-connected. Determine the open circuit emf per phase of the alternator. Subject Electrical machine 2
An Armature runs at 250 r.p.m. and generates an e.m.f. at 50 Hz. There are 216 slots each containing 5 conductors. The winding is distributed and full pitch. All the conductors of each phase are in series and flux per pole is 30 mWb which is sinusoidal distributed.Calculate the number of pole.
The total flux per pole in the air-gap of a 50-Hz alternator is 0.06 Wb. The flux-density distribution is given by T. The coil-span is 4/5 of a pole pitch. Determine the rms emf per armature turn. Find also the emf per armature turn when the flux were assumed to be sinusoidally distributed.
A long shunt compound generator delivers a current of 10A at 200V and has a series field resistance and shunt field resistance of 1 ohm and 200 ohms respectively. Then line current is a. 2A b. 1A c. 9A d. 10A