a) What is the mechanical advantage of a wheelbarrow, such as the one in Figure 9.24, if the center of gravity of the wheelbarrow and its load has a perpendicular lever arm of 5.50 cm, while the hands have a perpendicular lever arm of 1.02 m? (b) What upward force should you exert to support the wheelbarrow and its load if their combined mass is 55.0 kg? (c) What force does the wheel exert on the ground?

7

A three wheeled OTV has been designed such that the forces from the wheels and motors are uniform, hence the reaction forces at the point of contact with the upper surface can be modeled as a single vertical reaction support. The platform is a square with side length 200mm and has a thickness of 20mm. Plywood has a density of 0.3 g/cm^3. For the purposes of finding the platform weight, W, ignore any holes in the plywood for motor mounts. Due to a misscommunication in the team, the motor mounts M1, M2, and M3 were not attached symmetrically! The potential consequences of this are a difference in reaction forces at the platform to keep it balanced. This difference in reaction forces will result a different normal force at each wheel, and hence the potential for different traction forces, leading to an inability to drive the OTV straight. Co • F: (-75,-75) F₂: (85, -75) • F3: (15,85) -17.4319 MAT 1.338758 3.18886 7 Top View A coordinate system has been defined, such that middle of the…

A sectional steel cable of 3.00 cm2 has a mass of 2.40 kg per meter. If the cable is  500 m long hanging on a vertical cliff, how far the cable is stretched due to  weighs itself? Known young steel modulus 2.00 x 10¹¹ N/m2 .  (b). If there are two climbers hanging on the cable, determine how far  cable is stretched. The mass of climbers is 60 kg and 70 kg, respectively.