A water tank, 22 ft in diameter, is made from steel plates that are ½ in. thick. The circumferential stress is limited to 6000 psi. The specific weight of water is 62.4 lb/ft³. Now, given a free surface of water, the actual pressure distribution on the vessel is not uniform. It varies linearly from 0 at the free surface to yh at the bottom (see figure shown). Using this actual pressure distribution, find the allowable height if the total hydrostatic pressure is reduced by 50%.

A water tank, 22 ft in diameter, is made from steel plates that are ½ in. thick. The circumferential stress is limited to 6000 psi. The specific weight of water is 62.4 lb/ft³. Now, given a free surface of water, the actual pressure distribution on the vessel is not uniform. It varies linearly from 0 at the free surface to yh at the bottom (see figure shown). Using this actual pressure distribution, find the allowable height if the total hydrostatic pressure is reduced by 50%.

Name: Provide an FBD on this problem and please show a complete answer. Solv
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Provide an FBD on this problem and please show a complete answer. Solve the problem in a paper. Problem#2:A water tank, 22 ft in diameter, is made fromsteel plates that are ½ in. thick. Thecircumferential stress is limited to 6000 psi. Thespecific we

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

5. A cylindrical pressure vessel has an inner diameter of 240mm and a wall thickness of 1.5mm. If the hoop stress at point A is 100 MPa, find the pressure inside the tank.
Q11: In Figure below find the hydrostatic forces on the curve ABC. 4Psi A Tank full of water Empty cylinder r= 4.5 ft
A 4 m long metal cylinder with an external diameter of 600 mm anda wall thickness of 10 mm is filled with water at a pressure of 35 Bar. Young's modulus E = 60 GPa, Poisson's ratio v = 0.3 Calculate the hoop stress, OH, in megapascals (MPa) correct to two decimal places. OH: MPа Calculate the longitudinal stress, L, in megapascals (MPa) correct to two decimal places. OL: MPа Hence, calculate the maximum strain, eH, in the cylinder. Enter your answer in micro-strain correct to two decimal places: EH micro-strain
PROBLEM 3 GIVEN THE FIGURE. SOLVE FOR 4 m Hinge THE MAGNITUDE OF THE WL Gate REULTANT FORCE DUE TO 4m 4 m WATER.
5. Calculate the total hydrostatic force on the gate with width 2.5 m and pivoted at O; D is 3 m shown in Figure 5. The gate is composed of a lower curved section and an upper vertical section. The curved section is parabolic and is described by the equation y = cx², where c = 0.2.5 m ¹. Also, compute the height H, if a horizontal force P = 30 kN is applied to point A. y Water y = (x² ← P Gate Figure 5
B: A water tank, 6 m in diameter, is made from steel plates that are 13mm thick. Find the maximum height to which the tank may be filled if the circumferential stress is limited to 40 MPa and longitudinal stress of 18 MPа.
A 2 m long metal cylinder with an external diameter of 700 mm and a wall thickness of 45 mm is filled with water at a pressure of 10 Bar. Young's modulus E = 80 GPa, Poisson's ratio v = 0.3 Calculate the hoop stress, oH, in megapascals (MPa) correct to two decimal places. MPa Calculate the longitudinal stress, OL, in megapascals (MPa) correct to two decimal places. MPa Hence, calculate the maximum strain, ɛH, in the cylinder. Enter your answer in micro-strain correct to two decimal places: EH micro-strain
The wall thickness of a 6-ft diameter spherical tank is 5/8-in. Calculate the allowable internal pressure (in psi) if the stress is limited to 7 ksi.
A cylindrical steel pressure vessel with a diameter of 1200 mm and a wall thickness of 20 mm is subjected to an internal pressure of 4.5 MPa. Find the longitudinal stress in the tank.
1. Gate AB in Fig. below is 15 ft long and 8 ft wide into the paper and is hinged at B with a stop at A. The water is at 20°C. The gate is 1-in-thick steel, SG = 7.85. Compute the water level (h) for which the gate will start to fall. Pulley 15 f 60° 10,000 lb B Water
a. The hydrostatic force on the gate and its position as function of h and show its direction on the figure. b. The tension in the wire rope as function of h. c. The required value for M. d. The hydrostatic force on the vertical surface of the cylinder where the submerged area is equal to 2.8 m2e. The hydrostatic force on the horizontal surface of the cylinder. Interpret you result. f. For the same submerged volume, does the required value for M change if the cylindrical mass is replaced by a cubic mass? Explain.
5. The gate in the figure below is 5 ft wide, is hinged at point B, and rests against a smooth wall at point A. (1) Compute the force on the gate due to water pressure (Must include the magnitude and the center of pressure) (2) Compute the horizontal force exerted by the wall at point A. (3) Compute the reaction force at the hinge B (Must include the magnitude and direction)