A vinyl siding panel for a house is installed on a day when thetemperature is 15.6 °C. If the coefficient of thermal expansion forvinyl siding is 55.8 * 10-6K-1, how much room (in mm) shouldthe installer leave for expansion of a 3.66-m length if the sunlittemperature of the siding could reach 48.9 °C?

A vinyl siding panel for a house is installed on a day when thetemperature is 15.6 °C. If the coefficient of thermal expansion forvinyl siding is 55.8 * 10-6K-1, how much room (in mm) shouldthe installer leave for expansion of a 3.66-m length if the sunlittemperature of the siding could reach 48.9 °C?

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter16: Temperature And The Kinetic Theory Of Gases

Section: Chapter Questions

Problem 33P: At 25.0 m below the surface of the sea, where the temperature is 5.00C, a diver exhales an air...

See similar textbooks

Similar questions

The thermal conductivities of human tissues vary greatly. Fat and skin have conductivities of about 0.20 W/m K and 0.020 W/m K, respectively, while other tissues inside the body have conductivities of about 0.50 W/m K. Assume that between the core region of the body and the skin sin face lies a skin layer of 1.0 mm, fat layer of 0.50 cm, and 3.2 cm of other tissues. (a) Find the R-factor for each of these layers, and the equivalent R-factor for all layers taken together, retaining two digits. (b) Find the rate of energy loss when the core temperature is 37C and the exterior temperature is 0C. Assume that both a protective layer of clothing and an insulating layer of unmoving air a absent, and a body area of 2.0 m2.
At 25.0 m below the surface of the sea, where the temperature is 5.00C, a diver exhales an air bubble having a volume of 1.00 cm3. If the surface temperature of the sea is 20.0C, what is the volume of the bubble just before it breaks the surface?
Two concrete spans that form a bridge of length L are placed end to end so that no room is allowed for expansion (Fig. P16.63a). If a temperature increase of T occurs, what is the height y to which the spans rise when they buckle (Fig. P16.63b)?
A square pane of glass 0.500 m on a side is 6.00 mm thick. Whenthe temperatures on the two sides of the glass are 25.0°C and -10.0°C,the heat current due to conduction through the glass is 1.10 * 10^3 W.(a) What is the thermal conductivity of the glass? (b) If the thickness of theglass is increased to 9.00 mm, what will be the heat current?
A metal plate 4.00 mm thick has a temperature difference of 32.0°C between 6. A metal plate 4.00 mm thick has a temperature difference of 32.0°C between its faces. It transmits 200 kcal/h through an area of 5.00 cm. Calculate the its faces. It transmits 200 kcal/h through an area of 5.00 cm. Calculate the thermal conductivity of this metal in W/m K.
An electric kitchen range has a total wall area of 1.40 m2and is insulated with a layer of fiberglass 4.00 cm thick. The insidesurface of the fiberglass has a temperature of 175°C, and its outsidesurface is at 35.0°C. The fiberglass has a thermal conductivity of0.040 W /m . K. (a) What is the heat current through the insulation,assuming it may be treated as a flat slab with an area of 1.40 m2?(b) What electric-power input to the heating element is required tomaintain this temperature?
A spherical steel ball bearing has a diameter of 2.540 cm at 26.00°C. (Assume the coefficient of linear expansion of the steel is 1.10 10-5(°C-1), and the average volume expansion coefficient is 3.30 10-5(°C-1).) A) What is its diameter when its temperature is raised to 97.0°C? (Give your answer to four significant figures in cm.) B) What temperature change is required to increase its volume by 1.100%?
What will be the rise in temperature in 30 minutes of a block of copper of 500-gram mass if it is joined to a cylindrical copper rod 20 cm long and 3.0 mm in diameter when a temperature difference of 80 degree Celsius is maintained between ends of the rod? The thermal conductivity of copper is 1.02 cal/cm2-sec-°C/cm (neglect heat losses). COMPLETE FBD SOLUTION AND REQUIREMENTS PS. THIS IS A HEAT TRANSFER PROBLEM
Suppose a house's walls are 13.5 cm thick and and have an average thermal conductivity twice that of glass wool. Given: Thermal Conductivity of glass wool= 0.042k Calculate the rate of heat conduction, in watts, through the house's walls. Assume there are no windows or doors. The surface area of the walls is 120 m2 and their inside surface is at 16°C, while their outside surface is at 5.15°C .
Under steady state conditions, a piece of wood 350 mm by 350 mm and 15 mm thick conducts heat through its thickness and loses no appreciable heat through its well-insulated sides. The rate of heat flow is measured to be 14.0 W when the temperature difference across its thickness is 28 C°. Determine the thermal conductivity of this wood.
(a) Calculate the rate of heat conduction (in W) through house walls that are 11.5 cm thick and that have an average thermal conductivity twice that of glass wool. Assume there are no windows or doors. The surface area of the walls is 150 m? and their inside surface is at 20.0°C, while their outside surface is at 5.00°C. 1560 X W (b) How many 1 kW room heaters would be needed to balance the heat transfer due to conduction? (Round your answer to the next whole integer.) 1 kW room heaters (a) Calculate the rate of heat conduction (in W) through house walls that are 11.5 cm thick and that have an average thermal conductivity twice that of glass wool. Assume there are no windows or doors. The surface area of the walls is 150 m? and their inside surface is at 20.0°C, while their outside surface is at 5.00°C. 1565.21 X W (b) How many 1 kW room heaters would be needed to balance the heat transfer due to conduction? (Round your answer to the next whole integer.) 12 1 kW room heaters now from O…
A wooden ice box has a total area of 1.50 m2 amd walls with an average thickness of 2.0 cm. The box contains ice at 0.0 oC. The inside of the box is kept cold by melting ice. How much ice melts in one day if the ice box is kept in the shade of tree at 29 oC. (Assume the thermal conductivity of wood is 0.16 kJ/s m oC)