A vehicle is modelled as a combined mass-spring-damper system that oscillates in the vertical direction only. The driver of the vehicle travels along a road whose elevation varies sinusoidally as shown in Figure 2. The mass of the vehicle, which includes the driver, is 2500 kg. The stiffness and damping of the shocks are 40 kN/m and 3000 kg/s respectively. i. Determine the amplitude of vibration of the vehicle when it travels at a constant speed of 90 km/hr along the sinusoidal road. y/m 0.6 ►Velocity of vehicle m 0.4 ► Rigid massless tyre 0.2 distance (m) 20 60 80 -0.2 Figure 2

A vehicle is modelled as a combined mass-spring-damper system that oscillates in the vertical direction only. The driver of the vehicle travels along a road whose elevation varies sinusoidally as shown in Figure 2. The mass of the vehicle, which includes the driver, is 2500 kg. The stiffness and damping of the shocks are 40 kN/m and 3000 kg/s respectively. i. Determine the amplitude of vibration of the vehicle when it travels at a constant speed of 90 km/hr along the sinusoidal road. y/m 0.6 ►Velocity of vehicle m 0.4 ► Rigid massless tyre 0.2 distance (m) 20 60 80 -0.2 Figure 2

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A vehicle is modelled as a combined mass-spring-damper system that oscillates in the vertical direction only. The driver of the vehicle travels along a road whose elevation varies sinusoidally as shown in Figure 2. The mass of the vehicle, which includes the driver, is 2500 kg. The stiffness and damping of the shocks are 40 kN/m and 3000 kg/s respectively. i. Determine the amplitude of vibration of the vehicle when it travels at a constant speed of 90 km/hr along the sinusoidal road. ii. If additional load having a combined mass of 1000 kg is placed in the vehicle, determine the travelling speed of the vehicle that would result in a resonant condition. What is the amplitude of the vehicle at resonance? Using an appropriate graph and suitable equations, explain how the oscillations of the vehicle can be significantly reduced when travelling at very high speeds. Please note that a simple graphical sketch with your pen that clearly identifies the key points is acceptable. Your axes must…
Shock absorber. What is the smallest value of the damping constant of a shock absorber in the suspen- sion of a wheel of a car (consisting of a spring and an absorber) that will provide (theoretically) an oscillation- free ride if the mass of the car is 2000 kg and the spring constant equals 4500 kg/sec²?
A mass of 5 kg is suspended on a spring and set on oscillations. It is observed that theamplitude reduces to 5% of its initial value after 2 oscillations. It takes 0.5 seconds to do thetwo oscillations. Calculate the following.(i) The damping ratio(ii) The natural frequency(iii) The actual frequency(iv) The spring stiffness(v) The critical damping coefficient(vi) The actual damping coefficient
A 0.450kg mass oscillates at the end of a spring with the stiffness of 250 N/m. Thedamping force is proportional to the velocity –av and a= 8.50 kg/s. what is the frequencyof oscillation? What is the damping constant for a critically damped system?
A 10 kg vibrating system is placed on a table which is bolted to the floor. Due to operation of rotating equipment, the floor has a vibration amplitude of 0.2 mm at a frequency of 30 Hz. If the table is modeled as a spring of stiffness 1.3x106 N/m with a damping ratio of 0.04. Find the steady state acceleration amplitude of the vibrating system.
A mass weight 100 N is supported by a spring of stiffness 20 KN/m and a viscous damper. During free vibrations, the amplitude of vibrations decreases to one-tenth of its initial value in two complete oscillations. Find the value of damping coefficient of the damper.
A horizontal spring mass system with Coulomb damping has a mass of 5 kg attached to a spring of stiffness 980 N/m. If the coefficient of friction is 0.025,calculate the frequency of free vibrations, the number of cycles corresponding to 50% reduction in amplitude if the initial amplitude is 5cm and the time taken to achieve this 50% reduction.
A machine of mass 170.8 kg is mounted on four parallel springs each of stiffness 2.2 x 105 N/m. When the machine operates at 57.5 Hz, the machine's steady state amplitude is measured as 1.4 mm. What is the magnitude of force transmitted to the foundations of the machine at this speed? The damping in the system is negligible. (Express answers to 3sf) Answer:
This problem is an example of critically damped harmonic motion. A mass m = 7 kg is attached to both a spring with spring constant k = 448 N/m and a dash-pot with damping constant c = 112 N. s/m. The ball is started in motion with initial position = 6 m and initial velocity v₁ = -52 m/s. Determine the position function (t) in meters. x(t) =
A rotating mass machine has a mass of 200 kg and It rests on four shock absorbers, one of which has a stiffness of 250 N/mm. 450 N when the machine is started amplitude creates a 50 Hz harmonic force. The damping rate is assumed to be 20% and the movement Check whether the amplitude exceeds the allowable 0.03 mm
A rail road bumper is designed as a spring in parallel with a viscous damper. What is the bumper's damping coefficient such that the system has a damping ratio of 1.25, when the bumper is engaged by a rail car of 20,000 kg mass. The stiffness of the spring is 200 kN/m. If the rail car engages the bumper, while traveling at a speed of 20m/s, what is the maximum deflection of the bumper? poooo m
Consider a spring-mass system with mass equal to 1 kg, spring constant equal to 25 Newton/meter.Which damping constant b causes critical damping?If the damping constant b in the above system is set to 3 N ∙ sec/m, then what can be said about the number of timesdoes the object pass through its equilibrium position?If the damping constant b in the above system is set to 8 N ∙ sec/m, then what is the interval of time between thesecond time the object returns to its equilibrium position and the third time it returns to its equilibrium position?