A structural member with a rectangular cross section as shown in the accompanying figure is used to support a load of 2000 N. What type of material do you recommend be used to carry the load safely? Base your calculations on the yield strength and a factor of safety of 2.0. 20 cm 10 cm 5 mm

In a hydraulic system , a piston with a cross-sectional area of 29square cm pushes on an incompressible liquid with a force of 58N.The far end of the hydraulic pipe connects to a second piston with a cross-sectional surface area of 100cm?what is the force on the second piston

After an unfortunate accident occurred at a local warehouse, you were contracted to determine the cause. A jib crane collapsed and injured a worker. An image of this type of crane is shown in the figure.The horizontal steel beam had a mass of 88.50 kg per meter of length, and the tension in the cable was T = 12560 N. The crane was rated for a maximum load of P 500 kg. If d = 5.000 m, s = 0.558 m, x = 1.050 m, and h = 1.980 m, what was the magnitude of W1 (the load on the crane) before the collapse? The acceleration due to gravity is g = 9.810 m/s². 444.23 Wi = N Incorrect What was the magnitude of force Fp at the attachment point P? Fp = N

In a hydraulic lift, the radii of the pistons are 2.01 cm and 10.0 cm. A car weighing W = 10.0 kN is to be lifted by the force of the large piston. Find the mechanical advantage of the lift