A steel cylindrical pressure vessel with closed ends is 25 cm external diameter and 5 mm thick It is wound closely with a single layer of circular wire of diameter 1.2 mm. Under the tension of 96 N/mm2. If the cylinder is treated as thin. Calculate (1) Initial stress in cylinder. ii) Initizl pressure which will produce a stress of 48 N/mm?,

A steel cylindrical pressure vessel with closed ends is 25 cm external diameter and 5 mm thick It is wound closely with a single layer of circular wire of diameter 1.2 mm. Under the tension of 96 N/mm2. If the cylinder is treated as thin. Calculate (1) Initial stress in cylinder. ii) Initizl pressure which will produce a stress of 48 N/mm?,

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.3.9P: A cylinder filled with oil is under pressure from a piston, as shown in the figure. The diameter d...

See similar textbooks

Similar questions

A hemispherical window (or viewport) in a decompression chamber (see figure) is subjected to an internal air pressure of 85 psi. The window is attached to the wall of the chamber by 14 bolts. (a) Find the tensile force Fin each bolt and the tensile stress (T in the viewport if the radius of the hemisphere is 14 in. and its thickness is 1.25 in. (b) If the yield stress for each of the 14 bolts is 50 ksi and the factor of safety is 3.0, Find the required bolt diameter. (c) If the stress in the viewport is limited to 500 psi, find the required radius of the hemisphere.
: A hollow, pressurized sphere having a radius r = 4.8 in, and wall thickness t = 0.4 in. is lowered into a lake (see figure). The compressed air in the tank is at a pressure of 24 psi (gage pressure when the tank: is out of the water). At what depth D0will the wall of the tank be subjected to a compressive stress of 90 psi?
A safety valve on the top of a tank containing steam under pressure p has a discharge hole of diameter d(see figure). The valve is designed to release the steam when the pressure reaches the value Pmax If the natural length of the spring, is L and its stiffness is k, what should be the dimension ft of the valve? (Express your result as a formula for h.)
Engineer firms in many situations must verify the reliability of existing purchased designs. Your role as a quality engineer at an oil refinery is to confirm the maximum stresses imposed by a 1.03 MPa propane pressure inside the 20-lb design cylinder shown in Figure.3(a), at 25°C, which acts as a pressurized cylinder once the gate valve is closed. If the cylinder is made of 2.5-mm-thick steel and can be approximated as shown in Figure.3(c). Evaluate the maximum longitudinal and hoop stresses. 308 mm OL H 447 mm B (b)
A cylindrical steel pressure vessel with a diameter of 1200 mm and a wall thickness of 20 mm is subjected to an internal pressure of 4.5 MPa. Find the longitudinal stress in the tank.
A spherical pressure vessel 400 mm in diameter with a wall thickness of 15 mm. To what value may the internal pressure beincreased if the stress in steel is limited to 193 MPa?
Pressure inside the cylinder is 10 bars Is this a thin walled cylinder when the thickness is 10 mm. Estimate theoretically the hoop andlongitudinal stresses
Find the stress acting on the surface of a thin sphere of diameter 15 cm, thickness 0.25 cm and the internal pressure is 2 MPa
A steel tube of 300 mm external diameter is to be shrunk on to another steel tube of 90 mm internal diameter. After the diameter at the junction is 180 mm. Before shrinking on the difference at the junction is 0.12 mm. Find (i) The radial pressure at the junction; (ii) The circumferential stresses developed in the two tubes after shrinking on.
A steel tube of 200 mm external diameter is to be shrunkonto another steel tube of 60 mm internal diameter.The diameter at the junction after shrinking is 120 mmbefore shrinking on, the difference of diameters at the junctionis 0.08 mm. Calculate the radial pressure at the junctionand the Hoop stresses developed in the two tubes aftershrinking on.Take E = 2 x 10³ N/mm²
A cylindrical steel pressure vessel 400 mm in diameter with a wallthickness of 20 mm, is subjected to an internal pressure of 7.875 MPa.Calculate the longitudinal stress in the steel.
A cylindrical tank of 15 m high and 5 m in diameter is to be filled with water. Find the minimum thickness of the tank plating if the ultimate stress is limited to 500 MPa and the factor of safety is 2.