A simple ideal Rankine cycle with water as the working fluid operates between the pressure limits of 15 MPa in the boiler and 100 kPa in the condenser. Saturated steam enters the turbine. Determine: 1 2 .3 the work produced by the turbine, the heat transferred in the boiler, and thermal efficiency of the cycle.

A simple ideal Rankine cycle with water as the working fluid operates between the pressure limits of 15 MPa in the boiler and 100 kPa in the condenser. Saturated steam enters the turbine. Determine: 1 2 .3 the work produced by the turbine, the heat transferred in the boiler, and thermal efficiency of the cycle.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

PROBLEM: Steam power plant with ideal Rankine cycle. Steam enters the turbine at 4MPA and 700°C. The steam is cooled in the condenser at 20 kPa using cooling water. The net power output of the cycle is 100MW. Determine: a) The power produced by the turbine and consumed by the pump, b) thermal efficiency of the cycle, c) mass flow rate of the steam, and d) the mass flow rate of the condenser cooling water, if the cooling water enters the condenser at 15 °C and exits at 35°C. Draw the T-s diagram.
Consider an ideal Rankine cycle with reheating as shown. Steam enters a high-pressure turbine at 6 MPa and 440°C and expands to 0.5 MPa then reheated to 400°C. The condenser pressure is 8 kPa. • Calculate the quality at the exit of the low-pressure turbine, x6 = • Calculate the work produced by the low-pressure turbine in kJ/kg • Calculate the heat transfer in reheating (greheat) in kJ/kg = Boiler Turbine 3 QH 5 Condenser 87.3% || 89.0%||| 91.1% | 94.3% || 95.9% || 99.0% 763 |805 || 832 || 851878 || 901 513 556| 581 665 | 697|| 758
2. A Rankine cycle is characterized by turbine inlet conditions of 10 MPa and 500°C. The condenser pressure is 6 kPa. The heat transfer to the steam in the boiler occurs at the rate of 7.0 X 100 kW. The cooling water in the condenser increases in temperature from 20⁰ to 30°C. Determine (a) the net power produced; (b) the cooling-water flow rate in kg/s; (c) the cycle thermal efficiency.
There is a simple real rankine cycle, in which the steam enters the turbine with a pressure of 5MPa and a temperature of 500°C. The working pressure of the condenser is 20kPa. The mass flow of steam 35.4 kg/s. The Isoentropic efficiency of the turbine is 88% And the isoentropic efficiencyof the pump is 84%. Determine: a) The thermal efficiency of the cycle b) The net power produced by this cycle
4. Consider a simple ideal Rankine cycle. The pressure of the boiler and the condenser are 3 Mpa and 10 kPa respectively. The temperature of the steam entering the turbine is 350°C, and the quality of mixture leaving the turbine is 0.8. Calculate the back work ratio, in %. 0.4% - 0.5% · 0.3 % - 0.6%
A simple ideal Rankine cycle with water as the working fluid operates between the pressure limits of 10 MPa in Boiler the boiler and 10 kPa in the condenser and a turbine inlet temperature of 500°C. The boiler is sized to provide a steam flow of 165 kg/s. Determine: (a)(s) the quality of the steam at the turbine exit, (b) the thermal efficiency of the cycle, and (c) 2) the net power produced by the cycle Wa Condesser Turbine
Consider a steam power plant operating on a simple ideal Rankine cycle. Steam enters the turbine at 15 MPa and 650°C and is condensed in the condenser at a pressure of 15 kPa. Determine the Qin (kJ/kg). (Use 2 decimal places for the final answer.)
Problem: Water is used as the working fluid in an ideal Rankine cycle. Saturated liquid enters the pump with a specific volume of 1.2720 X 10-3m3/Kg and exits (the pump) at 1.7530 X 10-3 m3/Kg and a temperature of 380°C.The internal energy at the exit of the turbine is 2,500KJ/Kg. Determine:1. The network produced in KJ/Kg2. The heat transfer to the steam in the steam generator in KJ/Kg3. The thermal efficiency4. The heat transfer to cooling water passing through the condenser in KJ/Kg of steam condensed.
A simple Rankine cycle uses water as the working fluid. The boiler operates at 6400 kPa and the condenser at 70 kPa. At the entrance to the turbine, the temperature is 490 °C. The isentropic efficiency of the turbine is 84 %, pressure and pump losses are negligible, and the water leaving the condenser is subcooled by 6.7 °C. The boiler is sized for a mass flow rate of 18 kg/s. Determine the following values. (1) The temperature at the pump inlet. / 80.3 (2) The specific volume at the pump inlet. (3) The specific enthalpy at the turbine exit. X 346 (4) The rate at which heat is added in the boiler. (5) The power required to operate the pumps. (6) The net power produced by the cycle. (7) The thermal efficiency. o °C O m/kg O kJ/kg O kW O kW O kW 0.001030
14
A Rankine Cycle operates at a throttle pressure and temperature of 5 MPa and 450°C, respectively. The generator produces 20 MW at an efficiency of 95% while the mechanical efficiency is 97%. The actual expansion efficiency of the turbine is 85% and the pressure of the condenser is 10 kPa. Determine the mass flow rate of steam in kg/s