A shaft made from acrylic is subjected to the three torques indicated below. The acrylic has a shear modulus of 1.7 GPa. Determine: a. The twist at the end D if the diameter if the shaft is 100 mm. b. The minimum shaft diameter if Tallow = 10 MPa 200 N-m 800 N-m B 300 mm 400 N-m 600 mm 600 mm

A shaft made from acrylic is subjected to the three torques indicated below. The acrylic has a shear modulus of 1.7 GPa. Determine: a. The twist at the end D if the diameter if the shaft is 100 mm. b. The minimum shaft diameter if Tallow = 10 MPa 200 N-m 800 N-m B 300 mm 400 N-m 600 mm 600 mm

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A solid shaft in a rolling mill transmits a torque of 1600 N.m. Determine the diameter of the shaft…

A: Given Data T=1600 N.m = 16×105 N.mm Max. Shear stress=40 MPa Angle of twist=8° L=2500 mm G=83 GPa

Q: PROBLEM 1. The shafts are made of A-36 steel and both have 100 mm diameter. If a torque of 60 kN.m…

Q: 4. The tapered shaft is made from E- 36 steel ( G = 80 GPa ), and has a radius which can be…

A: Given Length, L = 4 m Torque, T = 450 Nm G = 80 GPa Find Angle of twist

Q: The solid shaft (G=70 GPa) has a diameter of 40 mm. Calculate: a. The magnitude and direction of the…

Q: The gears attached to the fixed -end steel shaft are subjected to the torques shown in fig .The…

A: We are suppose to solve only one question. Please post other question as a separate question.

Q: 4. The tapered shaft is made from E- 36 steel (G = 80 GPa ), and has a radius which can be described…

A: Given Torque, T = 450 Nm Length, L = 4 m Find Angle of the twist

Q: Torsion A hollow circular shaft has inside and outside diameters of 30 mm and 40 mm respectively.…

Q: 3.8 Attaching a hollow shaft to a solid shaft creates the steel shaft. Determine the maximum torque…

Q: Question 4. The shaft is made from a solid steel section AB and a tubular portion made of steel and…

A: Given data: T=50 kN.m Need to determine the angle of twist, at point C, maximum shear stress,…

Q: A hollow steel shaft with an outside diameter of 75 mm and a wall thickness of 5 mm is subjected to…

A: The given values are - do =75 mm, t=5 mm, T =4090×1000 Nmm, G =80×1000 Mpa, L=2000mm The inside…

Q: A solid titanium alloy [G=114⁢ GPa] shaft that is 950 mm long will be subjected to a pure torque of…

A: Given that G=114Gpa=114×103Mpa L=950mm T=195 N-m τall=145Mpa θall=30 min diameter on the basis of…

Q: A solid circular steel shaft having an outside diameter of 1.75 in. is subjected to a pure torque of…

A: Given data: ◆ The diameter of solid circular shaft: D = 1.75 inch ◆ The torque applied on the shaft:…

Q: What is the minimum diameter of a solid steel shaft that will not twist through more than 3.18…

Q: 2. The composite shaft of total length 1.8 m consists of 5 mm thick brass and is fixed to a 30 mm…

Q: The 6061-T6 aluminum shaft shown in Figure has a cross-sectional area in the shape of an equilateral…

A: Write the expression for cross sectional area of the cross section. Write the expression for the…

Q: The torque of 100 kip - ft is applied in the 16-ft-long hollow steel shaft. Note that the inner…

Q: J.A hollow shaft is 50 mm outside diameter and 30 mm internal diameter. An applied torque of 1.5 Nm…

A: Permissible stress is stress which produces due to pressure or forces which does not exceed the…

Q: d3 T3 T2 T1 d1 TP. B L3 L2 L1.-

A: The polar moment inertia of a circular cross-section is defined as moment of area about the axis…

Q: Determine the torque that can be transmitted by a shaft of 50 mm diameter, if the maximum allowable…

Q: The A-36 steel shaft with a diameter of 30mm is supported on smooth bearings that allow it to rotate…

A: Given: The diameter of the shaft, d = 30 mm = 0.03 m The modulus of elasticity of the A36 shaft, G =…

Q: Q.191 A solid circular shaft of diameter 100 mm is loaded with a uniformly distributed torque of 4…

Q: A solid circular steel shaft having an outside diameter of D = 1.25 in. is subjected to a pure…

Q: A steel shaft ABCD having a total length of 3.5 m consists of three lengths having different…

A: Torque is the rotational equivalent of linear force. It is also referred to as the moment, moment of…

Q: Q.4) A composite shaft is subjected to two torques as shown below. Shaft ABC is a hollow…

Q: A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 MPa. It is further…

A: Given, Diameter of shaft = d = 100 mm Axial stress = σa = 50 MPa Torque = T = 10 kNm = 10 x 106 Nmm…

Q: 5. The shaft of a motor has a length of 15 times its diameter and has a maximum twist of 1.5 degrees…

Q: Problem1: The entire composite shaft shown in the following figure is manufactured using steel with…

A: GivenG=80GPatorque =Tτa=75MPa

Q: A circular steel shaft of diameter 30 mm is subjected to a torque of 60 N-m. Calculate the angle of…

A: Given:Diameter of steel shaft,d=30mm=301000m=0.03 mTorque on shaft,T=60 NmLength of shaft,L=20…

Q: II. If the permissible shear stress of a solid shaft is of 70 MPa, the torque angle between two…

A: a. Determine the required diameter in the function of the shear stress…

Q: Q.191 A solid circular shaft of diameter 100 mm is loaded with a uniformly distributed torque of 4…

Q: A tapered, wrought iron shaft of length 5 ft, has 2 inch diameter at the fixed end and 0.8 inch…

A: Given data,length=5ftdiameter=2indiameter at free end=0.8intorque T=2000 lb-ing=107psiTo determine :…

Q: Question 1 A solid shaft has a diameter of 25 mm and is subjected to a torque of 200 Nm at one end.…

A: Given data: Diameter of shaft d=25 mm Torque T=200 N-m Length of the shaft L=0.8 m Modulus of…

Q: A solid constant-diameter shaft is subjected to the torques shown. The bearings shown allow the…

Q: Problem 3

A: Sign Convention: Consider anticlockwise torque as positive and clockwise torque as negative.Refer to…

Q: A hollow steel [G = 12,000 ksi] shaft with an outside diameter of 3.50 in. will be subjected to a…

Q: Determine the torque that can be transmitted by this shaft. D = 120 mm d = 80 mm L = 3 m Modulus of…

A: outside dia (D) = 120 mm = 0.120 m inside dia (d) = 80 mm = 0.08 m length (L) = 3 m modulus of…

Q: 4. The tapered shaft is made from E- 36 steel ( G = 80 GPa ), and has a radius which can be…

A: Given Torque, T = 450 Nm Length, L = 4 m Find Angle of the twist

Q: The shaft shown has a diameter of 30 mm and is fixed at points A and B. Shear Modulus = 75 GPa.…

Q: Determine the diameter of a solid steel shaft which will transmit 112.5 kW at 200 rpm. Also…

A: Given data, P= 112.5 kW =112500 W N= 200 rpm. θ=1.5° =0.0261799 rad. τ=55 N/mm² =55000000 N/m²…

Q: 1) A straight hollow shaft is fixed at one end and free at the other end. The shaft is made of…

A: A moment of inertia is a mass of the body when a body is rotating on an axis. The moment of inertia…

Q: The torques shown are applied to a 6 mm radius solid shaft with G = 70 GPa. Determine the maximum…

Q: A steel shaft with a diameter 45 mm and length 1.30 m transmits 55.50 kW from an electric motor to a…

A: Given data Diameter of shaft = d= 45 mm = 0.045 mLength of shaft =l = 1.30 mPower Delivered =P =…

Q: 3 T 100 mm 75 mm В 3.00 m 2.70 m G=28 GPa G=35 GPa

A: Stress: When a component or a part is subjected to any external force, a resisting force will be…

Q: A solid steel shaft of circular cross-section has diameter 50 mm, length 1,028 mm and shear modulus…

A: Let T =Maximum permissible torque d =Diameter =50mm J=Polar moment of inertia =613592.31mm4 τ…

Q: A hollow steel shaft with an outside diameter of 75 mm and a wall thickness of 5 mm is subjected to…

Q: Determine the torque that can be transmitted by this shaft. D = 120 mm Outer diameter, Inside…

Q: A hollow steel shaft 2540 mm long must transmit a torque of 34 kN-m. The total angle of twist must…

Q: What is the minimum diameter of a solid steel shaft that will not twist through more than 3˚ in a…

Q: Consider two steel shafts CFG and HJ of diameters 50 mm and 70 mm respectively as shown in fig. The…

Concept explainers

Power Transmission Elements

It is defined as the energy transfer from one location to another location. The energy will start moving from the energy generation source to the energy applied position to obtain the work output. From this method, a large amount of electric energy moves from the power station to various electrical substations.

Question

100%

A shaft made from acrylic is subjected to the three torques indicated below. The acrylic has a
shear modulus of 1.7 GPa. Determine:
a. The twist at the end D if the diameter if the shaft is 100 mm.
b. The minimum shaft diameter if Tallow = 10 MPa
200 N•m
A
800 N•m
300 mm
B
400 N•m
600 mm
C
600 mm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Design of Power Transmission Elements and Power Transmission Systems

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

3. The two identical shafts, 1 and 2, are built into supports at their left ends. Gears mounted on their right ends engage a third gear that is attached to shaft 3. Determine the torques in shafts 1 and 2 when the 500N -m torque is applied to shaft 3. 40 500 Nm 80 Dimensions in mm 4. A 4-ft-long tube with the cross section shown in the figure is made of aluminum. Find the torque that will cause a maximum shear stress of 10 000 psi. Use G = 4 x 106 psi for aluminum. +4 in. → 0.04 in. 0.08 in.´ 5. Two steel springs are arranged in series as shown. The upper spring has 36 turns of 100-mm- diameter wire on a mean radius of 350 mm. The lower spring consists of 24 turns of 75-mm diameter wire on a mean radius of 245 mm. If the ultimate shearing stress in either spring must not exceed 692 MPa, (a) compute the maximum value of P and total elongation using factor of safety equal to 1.5. (b) What is the equivalent spring constant? Use G = 83 GPa. 2 of 2 4 in. wwwww.-
A hollow steel shaft is stressed to 35 MPa by a torque of 200000Nm. Determine the outside diameter in mm if the inside diameter is 2/3 of the outside diameter both in mm.
A solid constant-diameter circular shaft is subjected to the torques of TA = 480 lb-ft, TB = 1060 lb-ft, Tc= 860 lb-ft, and Tp = 280 lb-ft, acting in the directions shown. The bearings shown allow the shaft to turn freely. (a) Plot a torque diagram showing the internal torque in segments (1), (2), and (3) of the shaft. Use the sign convention presented in %D Section 6.6. (b) If the allowable shear stress in the shaft is 5800 psi, what is the minimum acceptable diameter for the shaft? TB TA Tc (1) Tp (3) В C D Answer: (a) T1 = Ib-ft T2 = Ib-ft T3 = Ib-ft (b) d = in.
A shaft ABCD is fixed at end D and has torques acting at points A, B, and C as shown below. The bearing support between A and B allows free rotation. If we know that A = −0.382 rad, A/B = 0.358 rad, and B/C = −0.233 rad, calculate the absolute twist of the shaft at point C(oc) and enter it in rad (radians) correct to 3 significant digits below. Make sure to include the sign if it is negative noting that CCW rotations are positive and CW rotations are negative. 150 N.m 280 N.m B 40 N-m D
If the permissible shear stress of a solid shaft is of 70MPa, the torque angle between two cross sections separated 2.5m does not exceed 3°, the applied torque is of 1400N.m and G=11Gpa a. Determine the required diameter in function of the shear stress b. Determine the required diameter in function of the angle of twist
A solid constant-diameter shaft is subjected to the torques shown. The bearings shown allow the shaft to turn freely. Determine the internal torque in segment (2) of the shaft. Assume that TA = 130 N-m, TB = 300 N-m, Tc= 365 N-m, and Tp = 195 N-m. X TD O -155 N-m -204 N-m O -170 N-m -230 N-m O-214 N-m Tc C (2) B TB (1) TA
What is the minimum diameter of a solid steel shaft that will not twist through more than 3° (degrees) in a 6 m. length when subjected to a torque of 14 kN-m? Use G = 83 kN/ m^2. Convert your answers to mm.
A hollow steel shaft is stressed to 55 MPa by a torque of 135600Nm. Determine the outside diameter in mm if the inside diameter is 2/3 of the outside diameter and G = 83 GPa.
A hollow aluminium shaft of 80 mm outer diameter & 60 mm inner diameter is rotating @ 5 Hz when constant 120 KW is applied. Use the following: G(alum)=28 GPa, a=1.80 m, b=0.80m & L=2.60 m. Assumed that the angle of twist is constant.The torque "T2" developed at right fixed support at B is ___KN-m 3.82 2.64 0.48 1.18 5.03
A shaft is designed to transmit power of 100 kW at 180 rpm. The allowable shear stress is 50MPa and modulus of rigidity of 80 GPa. The angle of twist is not to exceed to 1° in 4-meter length A. Calculate the diameter of the shaft in inches. B.If the shaft in A is to be fitted to a hub with material SAE 0105 and fit classification of FN3, what will be the maximum and minimum stresses based on the interference of metal.
The dimensions of a stepped shaft are shown below. The maximum shear stress specification of the material is 67.1 MPa. Calculate the allowable torque for the shaft. r= 2.4 mm 12 mm 15 mm
The compound shaft carries the two torques shown. The shear moduli are 28 GPa for aluminum, 83 GPa for steel, and 35 Gpa for bronze. If T = 1168.7 Nm, U = 4515 Nm, x = 3.01 m, y = 2.36 m, z = 1.35 m, d = 90 mm, and e = 83 mm, find the angle of rotation of the free end of the shaft. Round off the final answer to two decimal places. U T Aluminum Steel Bronze