A sample of saturated clay from a consolidometer test has a total weight of 1.526 kg and a dry weight of 1.053 kg. The specific gravity of the solid particles is 2.7 1. Determine the water content. 2. Calculate the porosity. 3. Determine the total unit weight.

A sample of saturated clay from a consolidometer test has a total weight of 1.526 kg and a dry weight of 1.053 kg. The specific gravity of the solid particles is 2.7 1. Determine the water content. 2. Calculate the porosity. 3. Determine the total unit weight.

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter10: Shear Strength Of Soil

Section: Chapter Questions

Problem 10.20P

See similar textbooks

Related questions

Q: DEPARTURE LATITUDE AZIMUYH COURSE LENGTH FROM NORTH +N -S +E 5.53 0°50' 296°06' 205 54' 135 20' 33 2...

A: Transit Rule: Transit rule is generally used in surveying for balancing the traverse. In other words...

Q: OPEN CORPASS TRAVERSE. Given in the accompanying sketch pass traverse. alues accordingly. 23. the ob...

A: A sketch depicting the forward and back bearings of an open traverse is given. In accordance with th...

Q: A constant head permeability test is performed on soil that is 2 cm x 2 cm square, and 2.5cm long. T...

Q: Find the moment capacity with the given concrete beam cross section.

Q: 3-63* At a point on the outside surface of a steel (v 0.30) thin-walled pressure vessel the strain r...

Q: e having a weight of in E3.5. It deforms hori

A: given:

Q: A coffer dam is designed for a 25 year flood and constructed. If it takes 5 years to complete the co...

A: Given data, T= 25years n= 5 years To find:- Risk of failure of dam=?

Q: Give an example of industry-level filtration, preferably related to your career; in your example it ...

A: industrial filtration has been used to trap and remove the contaminants and safely remove and dump t...

Q: A truck and trailer combination crossing a 10m simply supported span has axle loads of 0.8X, Y, and ...

A: Rolling loads are those loads, which roll over the given structural element from one end to the othe...

Q: Determine the equation of the elastic curve for the beam using the x coordinate that is valid for 0<...

A: As per bartleby guidelines, experts are allowed to solve only first three parts. For solution of re...

Q: An axially loaded tied column must sustain the following service loads: = 1,000 kN 1,600 kN Total De...

A: DL = 1000 kNLL = 1600 kNPu = 1.2DL + 1.6LL = 3760 kNφ = 0.65f'c = 21 MPafy = 420 MPaρ = 3% = 0.03Ag ...

Q: A structural beam of the cross-section shown is extruded from an aluminum alloy for which the ulti...

A: Given, Ultimate strength (σu) = 450 MPa Factor of safety (FS) = 3 The bending stress at any point ...

Q: ubjected to an evented by the

Q: The kinetic energy of a 4.0 kg object moving at 3.0 m/s is: 1. 12 J *2. 18 J 3. 36 J 4. 48 J

Q: A beam of rectangular cross-section is subjected to a vertical shear force 'V. The shear force carri...

Q: As2 h

Q: A concrete dam retaining water is shown. If the specific weight of the concrete is 23.5 kN/m?, find ...

Q: Compare and analyze plotting in Model space and in Layout Tabs. What are their advantages and disadv...

A: every drawing in AutoCAD is having two-part both model space and layout tabs. By default we work on ...

Q: A cylindrical tank 6 m in diameter and 4 m high is filled with water. If an orifice 200 mm in diamet...

Q: 10 KN 20 KN / m 5 KN / m A В SIMPLE STRESSES 5 KN / m D 50 KN-m 5 KN / m F E 3. Points C and D of th...

Q: A constant head permeability test is performed on soil that is 4 cm2, and 2.5cm long. The head diffe...

Q: A soil sample having a void ratio of 1.3, water content of 50% and a specific gravity of 2.60, is in...

A: We have to asked a soil sample is which saturation in following option.

Q: 100 units of prefabricated blocks with dimensions of 2.00 m x 0.9 m x 0.2 m will be stored on a site...

Q: Determine average precipitation

A: Given data : Depth of precipitation at station A PA=2.65 in Depth of precipitation at station B PB=1...

Q: A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars a...

Q: Determine the section classification of W10x33 if Fy = 350 MPa bf = 202.18 mm tf = 11.05 mm d = 247....

A: Given that for a section W10x33, fy = 350 MPa bf = 202.18 mm tf=11.05 mm d=247.14 mm tw=7.37 mm k=2...

Q: • Determine the reactions at supports A, B, C, and D: a.) using portal method K 9 kN 4 m E F G H 12 ...

A: We have to determine the value of reaction at supports A,B,C and D using the portal method of analys...

Q: Problem 1. From the given data of a three wire leveling as shown in the tabulation: Point Backsight ...

A: The given table is shown below:

Q: *4-48. Draw the shear and moment diagrams for each member of the frame. The joints at A, B, and C ar...

A: Given,

Q: 11. Which IS codes gives details about elevators? A. O IS 27752 B. O IS 38665 C. O IS 14665 D. O IS ...

A: IS code that gives details about elevators

Q: Deparrtese Azimuth line Distanze frem. Latitude, Calcalated Comection Corected Coleulated Conrection...

Q: Given the following: Column: 600 mm x 600 mm Axial Dead Load = 1680 kN Axial Live Load = 1350 kN Dep...

Q: A uniform block of steel (SG = 7.85) will float at a mercury-water interface. What is the ratio of t...

Q: Draw the shear and moment diagrams for the beam using both method of sections and method of integrat...

Q: The small body has a speed vA = 6.5 m/s at point A. Neglecting friction, determine its speed at poin...

Q: A homogeneous, simply supported prismatic beam of width B, depth Dand span Lis subjected to a concen...

A: Depth of beam = D Width of beam= B Span length = L Load = P (point load)

Q: Precipitation (in.) Gage 2.65 1.98 0.85 2.35 ABCA

Q: Determine the deflection and rotation at point C. Aluminum rod E= 70 GPa G-26 GPa A 100 mm? a 23,6 x...

A: Deflection of a beam is capacity of its heap design, length, snapshot of inactivity, modulus of vers...

Q: A concrete floor slab 100 mm thick is cast monolithic with concrete beams 2.0 m on centers. The bea...

Q: A two-engine jet transport has a loaded weight of 90000 lb and a forward thrust of 9170lb per engine...

Q: Three standard mortar cubes were made using nonpotable water available at the job site, and three ot...

A: Standard Requirements of ASTM for adding water in concrete are as follow ; - Average compressive str...

Q: What is capillarity in parallel plates? What are the uses of it and how does it work?

A: When the distance between the plates is very small and plates are immersed in liquid, the liquid may...

Q: A cylindrical metal specimen having an original diameter of 10.63 mm and gauge length of 50.1 mm is ...

Q: The dimensions of a rectangular beam are limited to b = 300 mm and effective depth, d = 700 mm. Usin...

Q: tively. For both values of P. the column will be subje factored bending moments M, of 295 and 24 ft-...

A: According to given data 20 in. square lower storey interior building Pu= 880 Pu min. 551 Kips Mu=2...

Q: Find the total head for points A and B Find the hydraulic gradient for the system What is the pressu...

A: The total head (H) in the soil is equal to the sum of the pressure head and datum head. The velocity...

Q: AN ALUMINUM ROD IS RIGIDLY ATTACHED BETWEEN A STEEL ROD AND A BRONZE ROD AS SHOWN IN THE FIGURE. AXI...

Q: The 20mmØ bottom bars in the figure are epoxy coated. Assuming normal weight concrete, fy= 420 MPa, ...

Q: Given a vertical alignment connecting a -4% grade with a +2% grade with the PVC station at 34+64 wit...

Q: CONSTANT HEAD PERMEABILITY TEST a. why the need to get the temperature of the collected water? b. wh...

A: Concept Constant head permeability test Permeability also known as hydraulic conductivity is measure...

Concept explainers

Weight-Volume relationships

Weight is defined as the quantity of matter contained in a body. Weight can also be defined as the force acting on a body due to gravity. Mathematically, weight can be defined as-

Question

A sample of saturated clay from a consolidometer test has a total weight of 1.526 kg and a dry weight of 1.053 kg. The specific gravity of the solid particles is 2.7

1. Determine the water content.

2. Calculate the porosity.

3. Determine the total unit weight.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A sample of saturated clay was placed in a container and weighed. The weight was 6N. The clay in its container was placed in an oven for 24 hours at 105˚C. The weight reduced to a constant value of 5N. The weight of the container is 1N. If Gs = 2.7, determine: a) Water Content b) Void Ratio c) Bulk Unit Weight d) Dry Unit Weight e) Effective Unit Weight
2. A sample of saturated clay was placed in a container and weighed. The weight was 6N. The clay in its container was placed in an oven for 24 hours at 105° C. The weight reduced to a constant value of 5N. The weight of the container is 1N. If G, 2.7, determine the (a) water content; (b) void ratio; (c) bulk unit weight; (d) dry unit weight; and (e) effective unit weight.
Homeworks 2. The following results were obtained from an oedometer test on a specimen of saturated clay: Pressure (kN/m?) 27 54 107 214 429 214 107 54 Void ratio 1.243 1.217 1.144 1.068 0.994 1.001 1.012 1.024 A layer of this clay 8m thick lies below a 4m depth of sand, the water table being at the surface. The saturated unit weight for both soils is 19kN/m3. A 4m depth of fill of unit weight 21 kN/m3 is placed on the sand over an extensive area. Determine the final settlement due to consolidation of the clay. -1 e -eo 1+e, o'y-o'vo my S = i=l
Permeability tests were performed on a soil sample, under different void ratio and different temperatures and the following results were obtained. Test No. 1 2 Void ratio (e) 0.65 1.02 Temperature °℃ 25° 40⁰ Estimate the coefficient of permeability at a temperature of 20°C for a voids ratio of 0.80. Given the following physical properties of water: At 20°C, n = 10.09 × 10+ and p„ = 0.998 g/cm³ At 25°C, n = 8.95 × 104 g sec/cm² and p k(cm/s) 0.4x10 1.9x10-¹ At 40° C, n = 6.54 × 10-¹ g sec/cm² and p $0.997 g/cm³ = = 0.992 g/cm³
a wet sand sample has a volume of 4.6 x 10^-4 m^3 and weighs 8.1 N. After oven-drying, the weight reduces to 7.5 N. Use Gs=2.59. Calculate the degree of saturation in decimal form
Permeability tests were performed on a soil sample, under different void ratio and different temperatures and the following results were obtained. Test No. 1 2 Void ratio Temperature °C (e) 0.65 1.02 25° 40⁰ Estimate the coefficient of permeability at a temperature of 20°C for a voids ratio of 0.80. Given the following physical properties of water: At 20°C, n = 10.09 × 10+ and p„ = 0.998 g/cm³ At 25°C, n = 8.95 × 104 g sec/cm² and p k(cm/s) 0.4x10 1.9x10¹ At 40° C, n = 6.54 × 10 g sec/cm² and p 8 0.997 g/cm³ = 0.992 g/cm³
A sample of silty sand in its natural conditions had a volume of 120cm3 and weighed 149g. After saturating the sample with water, it weighed 188g. The sample was then drained by gravity until it reached a constant weight of 133g. Finally the sample was oven dried for 2 days at 221 degrees fahrenheit after which it weighed 120 g. Note that the volume of the voids in the sample under natural conditions is the volume of water in the sample at saturation. Assuming that the density of water is 1 g/cc. Perform the following calculations: a) Water content on a mass basis under natural conditions b) Specificyield c) Specific retention d) Totalporevolume e) Porosity under natural conditions
A sample of saturated clay was placed in a container and weighed. The weight was 6N. The clay in its container was placed in an oven dray for 24 hours @ 105°C. The weight reduced to a constant weight of 5N. The weight of the container is IN. If Gs = 2.7, determine: (a). Water content. (b). Void ratio. (c). Moist unit weight. (d). Dry unit weight. (e). Effective unit weight (Submerged unit weight).
A sample of soil in natural state having a volume of 0.00934 m3 weighs 18.11 kg. The sample is allowed to dry in an oven and the weight was reduced to 15.68 kg. The specific gravity of the solid was found to be 2.67. What is the porosity?
PROBLEM No. 4 A sample of dry sand having a unit weight of 17.50 kN/m³ and a specific gravity of 2.69 is placed in the rain. During the rain, the volume of the sample remains constant but the degree of saturation increases to 45%. Determine the following: The void ratio of the sample in percent. b. The unit weight of the sample after being in the rain. The water content of the sample after being in the rain. a. С.
A fully saturated soil sample has a volume of 28 cc. The sample was dried in oven and the weight of the dry soil pat was found to be 48.76 g. Given G= 2.68. Determine the porosity in percent.
14. The soil sample in natural state having a volume of 0.0012 m³ weighs 1.73 kg. The degree of saturation being 45.6%. After drying in an oven, the final weight of the sample was 1.44 kg. a. Find the specific gravity of solid. b. Determine the void ratio.