A refrigeration system is to be used to cool 45,000kg water for 32 Celsius to 19 Celsius in 5 hours. The refrigerant is R-134A and the operating condition are evaporating pressure 810 kPa and 1800 kPa liquefication pressure. Determine COP, quantity of cooling water in the condenser for an increase in temperature of 7 Celsius compressor power, volume of flow rate entering the compressor. With schematic diagram.

A refrigeration system is to be used to cool 45,000kg water for 32 Celsius to 19 Celsius in 5 hours. The refrigerant is R-134A and the operating condition are evaporating pressure 810 kPa and 1800 kPa liquefication pressure. Determine COP, quantity of cooling water in the condenser for an increase in temperature of 7 Celsius compressor power, volume of flow rate entering the compressor. With schematic diagram.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter48: Cooling Towers And Pumps

Section: Chapter Questions

Problem 13RQ

See similar textbooks

Similar questions

Four methods for controlling head pressure in an air-cooled condenser are ______, ______, _______, and
Two methods used to power refrigeration compressors on a ship are _____and ____.
The seasonal energy efficiency ratio (SEER) includes the energy used in the _____and _____cycles.
Q.2: A refrigeration system using refrigerant 22 is to have a refrigerating capacity of 80 kW. The cycle is a standard vapor-compression cycle in which the evaporating temperature 42°C. -8°C and the condensing temperature (a) Determine the volume flow of refrigerant measured in cubic is meters inlet at the to the compressor. second per (b) Calculate the power required by the compressor. (c) At the entrance to the evaporator what is the fraction of vapor in the mixture.
A cooling system capacity Fifteen ton refrigeration, operating at 150 kPa in the evaporator, while in the condenser is 950 kPa. If refrigerant R-134a is in saturated conditions, calculate the power theoretical required to operate compressor. Power Compressor...kW.
An ideal refrigeration system using R-134a, working at -10 °C and 40 °C for evaporator and condenser temperature respectively. What is the Pressure of condenser and Evaporator respectively in "bar" unit.
In a 14 TR ammonia refrigeration plant, the condensing temperature is 250C and evaporating temperature -100C. The refrigerant ammonia is sub-cooled by 5 0C before passing through the throttle valve. The vapor leaving the evaporator is 0.97 dry. Find: 1. Coefficient of performance: and 2. Power required. Use refrigerant table for properties of ammonia at 250C and -100C.
9. A 9.5 tonnes capacity of ammonia refrigerator operates between evaporator and condenser temperature of -13°C and 28°C is needed in a food storage locker. The refrigerant is sub-cooled by 4°C before entering the expansion valve. The vapour is 0.90 dry as it leaves the evaporator coil. The compression in the compressor is adiabatic type. Using p-h chart find (i) Condition of vapour at outlet of the compressor (ii) Condition of vapour at entrance to evaporator (iii) С.О.Р. (iv) Power required in kW Neglect valve throttling and clearance effect.
a cooling system with a capacity of 10 tons of refrigeration, operates at 210 kPa in the evaporator, while in the condenser is 1100 kPa. if refrigerant R-717 is saturated, calculate the theoretical power required to operate the compressor. compressor power = .... kW
PLease answer with clean solution. Thanks A refrigeration system using refrigerant 12 is to have a refrigerating capacity of 80 kW. The cycle is a standard vapor-compression cycle in which the evaporating temperature is -15°C and the condensing temperature 30°C. Determine the volume flow of refrigerant measured in liters per second at the inlet to the compressor.
A plant using R134a refrigerant has a cooling capacity of 352 kW of refrigeration. It evaporates at 0 Cand condenses at 35 C, with the 5 of superheat at the evaporator outlet and 5 K of sub-cooling at the condenser outlet. Assuming isentropic compression and ignoring pressure drops in the piping, the evaporator and condenser, determi the following; a) The refrigeration effect b) The mass flow rate of refrigerant ) The compressor power d) The rate of heatrejection at the condenser e) The COP 0 The corresponding Carnot COP g) The percentage Carnot-efficiency
b. A refrigerating system using Freon-12 has an evaporator saturation temperature of - 25°C and a condenser saturation temperature of 35°C. The vapor is dry saturated at entry to the compressor and has a temperature of 65°C after compression to the condenser pressure. There is no undercooling of the liquid in the condenser. i. Calculate the input power required by the compressor per kW of refrigeration. ii. Calculate the COPRef of the refrigerating system. ii. Show the operating cycle of the refrigerating system on a T-s diagram.