A parallel generator gives KWD 260 volts at a speed of 1100 revolutions per minute, if the product resistance is 0.5 ohms and the field resistance is 260 ohms, and the machine works as a motor and is equipped with a voltage of 260 volts at no load and draws a current of 5 amps. Calculate the speed of the machine when it works as a motor that draws a current of 50 amperes at a voltage of 260 volts. (Ignore the reaction of the product).

A parallel generator gives KWD 260 volts at a speed of 1100 revolutions per minute, if the product resistance is 0.5 ohms and the field resistance is 260 ohms, and the machine works as a motor and is equipped with a voltage of 260 volts at no load and draws a current of 5 amps. Calculate the speed of the machine when it works as a motor that draws a current of 50 amperes at a voltage of 260 volts. (Ignore the reaction of the product).

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

10. A potential difference of 250 V is applied to a field winding at 15-C and the current is 5 A. What will be the temperature of the winding when current has fallen to 3.91 A applied voltage being constant. Assume temperature coefficient at 15'C is equal to 1/254.5 per °C
What are the rotating parts on d.c machine. commutator segments O brushes O inter-pole O pole shoe
O c. K = 101.86 and flux =3.33 mWb / pole O d. K = 59.5 and flux = 1.33 mWb/pole In a given DC motor, the output power is 45 HP, and the copper losses are 2.005 KW. If the rotational losses is one tenth of the output power, find the converted power and the efficiency of the motor. Select one: O a. None O b. Prony = 33.57 KW and % efficiency 89.2 % O c. Pcony = 39 KW and % efficiency 75.8 % O d. Pcony = 36.927 KW and % efficiency 86.2 % Ps Ae Pr Ai
Iron losses in a DC machine are independent of variations in ) load voltage speed O All of these
A dc machine has hysteresis loss of 300 W and an eddy current loss of 200 W when running at 1200 rpm. At what speed will the total core losses be a quarter of the original if the flux is to be twice as the original.
The sinewave has a peak voltage of 7 A and a Half cycle value of 9.3333 ms. What is the frequency? a. 214.28 Hz b. 321.42 Hz c. 53.57 Hz d. 35.71 Hz
Q- The armature resistance of a permanent magnet dc motor is 0.80. At no load, the motor draws 1.5 A from a supply voltage of 25 V and runs at 1500 rpm. The efficiency of the motor while it is operating on load at 1500 rpm drawing a current of 3.5 A from the same source will be
The maximum speed of an alternator working at 60 Hz is possible when the number of poles of the machine is ........ a. 4 b. 5 c. 3 d. 2
The DC shunt generator with the terminal voltage 325 V, armature drop 9 V and the each brush drop 4 V, then the value of generated emf is n
A separately-excited dc generator develops running at 1189 rpm at a certain flux generate a certain voltage. What should be the new speed in rpm if the voltage is intended to increase by 32 % and the flux is reduced to 73 % from the original value?
Q3: A universal fractional horsepower series motor has a resistance of 30 Q and a total inductance of 0.5 H. When connected to a 250 V d.c. supply and loaded to take 0.8 A, it runs at 2000 r.p.m. Estimate the speed and p.f. when connected to a 250 V a.c. supply and loaded to the same current.
Q3: A universal fractional horsepower series motor has a resistance of 30 22 and a total inductance of 0.5 H. When connected to a 250 V d.c. supply and loaded to take 0.8 A, it runs at 2000 r.p.m. Estimate the speed and p.f. when connected to a 250 V a.c. supply and loaded to the same current.