A pair of overlap aerial photographs was taken with a camera from an altitude of 3000 m above datum The focal length of camera was 120 mm and the mean distance between two principal points both of which lie on the datum, was 71.20 mm. In the common overlap area, a tall chimney 200 m high with its base in the datum surface was observed. Find out the difference of parallax for the top and bottom of the chimney.

A pair of overlap aerial photographs was taken with a camera from an altitude of 3000 m above datum The focal length of camera was 120 mm and the mean distance between two principal points both of which lie on the datum, was 71.20 mm. In the common overlap area, a tall chimney 200 m high with its base in the datum surface was observed. Find out the difference of parallax for the top and bottom of the chimney.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The.survey
A vertical photograph of a flat area having an average elevation of 250 m above mean sea level was taken with a camera of focal length 25 cm. A section line AB 300 m appears 15 cm on the photograph. The distance b/w images of top and bottom of the tower measures 0.5 cm on the photograph. The distance of the image of the top of the tower is 10 cm. Find the actual height of the tower.
Problem 2. The following observations were taken during a tacheometric survey using the stadia lines of a theodolite (multiplying constant 100, no additive constant.) Station Set Station Observed at B Calculate: A с Staff Readings M U L 5.62 6.92 8.22 3.14 4.45 5.76 a) the horizontal lengths AB and BC b) the difference in level between A and C; Vertical angle +5°32' -6°46' Bearing 26°36′ 174°18'
I need the answer as soon as possible
11. (a) Calculate the minimum arrival times for seismic reflections from each of the reflecting interfaces in the following section. Consider the base of the lower- most bed to be a reflector as well. (b) What is the average velocity of the section for a reflection from the base of the dolomite? (c) Using the listed densities calculate the reflection coefficient for each interface (except the base of the dolomite). Which interface gives the strongest
Soil or rock layer thickness may be calculated when the sound velocity decreases with layer depth True False
b) Seismic refraction survey is widely used as one of geophysical tool to investigate the ground condition. Sketch and explain the mechanism of the seismic refraction method on how the wave travels in different ground materials for the estimation of the thickness of i. the earth's formation.
A fishing vessel with a green light on its deck, 20.5m above the water, disappears from the sight of a man on shore whose eye level measures 1.50 m above the water. Determine the distance between the vessel and the man considering the effect of earth's curvature and atmospheric refraction Select the correct response: 26.67m 25.45km 23.56km 22.14km
If the rod reading taken at 1 is 2.735 m, the elevation of 2 is 225.395 m, the difference in elevation between stations 1 and 2 is 25.650m and the difference in elevation between the instrument station and station 2 is 33.642m, determine the following: a. Height of the instrument. b. Horizontal distance between stations 1and 2.
i need the answer quickly
EDM 1) A line was measured by EDM found 4032.32 m, what is the probable error in this distance if the EDM precision is + (2 mm+3 ppm)? 2) The modulation frequency of a red laser beam (A=0.6328 µm) is 24 MHz. This beam travels through the atmosphere, the temperature of which is 26°C and the atmospheric pressure 1011.92 hPa. What is the modulated wavelength of the light? (Answer 2=12.4879 m) 3) A slope distance of 204.834 m was determined by EDM, the instrument and prism having been set up 1.645 m and 1.873 m respectively above their stations. The altitude angle between the stations was later measured as 2°17'40", the instrument station being the higher on the two. Calculate the horizontal length of the line. (Answer 204.679 m)
Use double integration method