A house painter stands 3.00 m above the ground on a 5.00-m-long ladder that leans against the wall at a point 4.70 m above the ground. The painter weighs 698 N and the ladder weighs 106 N. A) Assuming no friction between the house and the upper end of the ladder, find the force of friction that the driveway exerts on the bottom of the ladder. If the force of friction is away from the wall, enter a negative value and if the force of friction is toward the wall, enter a positive value.in N

Q: A painter with 80 weight is on a 4 meters long platform. Platform has negligible weight. The painter…

A:

Q: Two children push on opposite sides of a door during play. Both push horizontally and perpendicular…

A:

Q: dder is tied at its bottom on the wall using a wire shown in the figure. The floor is frictionless,…

A: Given data: Mass of ladder,m=110 kg The horizontal length is 5 m The vertical length is 12 m Maximum…

Q: A 75.0N block sits on a plane inclined 25.0° with the horizontal as shown below. The coefficients of…

A:

Q: For the next three items: A 200 kg plank is projecting a distance L = 5.0 m from a wall which is…

A:

Q: A 1,137-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the…

A:

Q: In the figure below, the horizontal boom is uniform and has the same weight as the hanging weight at…

A:

Q: H.W. Determine the horizontal force P required to cause slippage to occur. The friction coefficients…

A: The normal forces, which are in they-direction, may be determined without  reference to the friction…

Q: Determine whether the block shown in the figure is in equilibrium and find the magnitude and…

A: I have used concept of equillibrium

Q: A block resting on a plane inclined at an angle e 32° from the horizontal is being held in place by…

A: Solution:-Given thatTension in cable b (Tb)=80 Nθ=32°

Q: A block resting on a plane inclined at an angle 0 32° from the horizontal is being held in place by…

A:

Q: Two identical wooden boards lean (standing still) against a frictionless wall. Board #1 makes an…

A: The objective of the question is to compare the forces acting on two identical wooden boards leaning…

Q: What is the tension force present on the string attached to the ceiling making an angle of 34° if a…

A:

Q: A sign weighing 339 N is hanging (via a wire) from a uniform 347 N beam of length L. Additionally,…

A:

Q: 1. A 150 kg uniform scaffold is 10.0 m long. It is hanging with two wires, one from each end. A 85…

A: a) The free body diagram  is given below.

Q: 1 150-N uniform boom at p = 69.5° to the vertical is supported by a cable at an angle 0 = 20.5° to…

A:

Q: A uniform horizontal strut weighs 290.0 N. One end of the strut is attached to a hinged support at…

A:

Q: A 2.0 kg box is placed on a wooden board with a static coefficient of friction= 0.2 and a kinetic…

A:

Q: A block resting on a plane inclined at an angle 0 32° from the horizontal is being held in place by…

A: Given: b=80 N.

Q: The figure below shows a bird feeder that weighs 177.7 N. The feeder is supported by a vertical…

A: Given:Weight of bird feeder = 177.7 N

Q: A 10.9 m. 265 N uniformly constructed ladder rests against a frictionless wall, making an angle of…

A: In static friction, the frictional force resists force that is applied to an object, and the object…

Q: A post is supported by a guy wire which exerts a pull of 100N on the top of the post. If the angle…

A: The free-body diagram of the guy wire with the post is shown below.

Q: Two children push on opposite sides of a door during play. Both push horizontally and perpendicular…

A: Given:Force applied by first child, F1 = 175 NDistance of application of the force(For 1st child),…

Q: 6. A beam of length L is supported by a pin and wire as shown. There is a crate hanging from the top…

A: Given : Length of beam =L Mass of crate =mc Mass of beam =mb

Q: You are pressing a 3.0 kg cubic wooden block into a corner between a wall and the floor. Your arms…

A: We are given a block being pressed to corner. We are given the angle of pressing. We first draw free…

Q: A horizontal rod of length 429 cm is held aloft by friction against a brick wall on one end and on…

A: Basic Details The torque and the force that are acting on the body is zero at the position of…

Q: A 35kg block is pushed with a force of 14.0 N across the floor. The force of friction is 2.0 N.…

A: Free Body Diagram:

Q: A 100 N block is lying along the table top as shown in the figure. The magnitude of the applied…

A:

Q: The two structural members, one of which is in tension and the other in compression, exert the…

A:

Q: A 2.00 kg block is held in equilibrium on an incline of angle e = 50° by a horizontal force F…

A: Given:m =2kgθ=50°μ=0.300

Q: A woman who weighs 533 N is leaning against a smooth vertical wall, as the drawing shows. Find (a)…

A:

Q: lock A in the figure weighs 60.0 The coefficient of static friction between the block and the…

A: For equilibrium net force acting on the system must be zero.

Q: A 12 ft long, 38 lb ladder leans against a frictionless wall. The coefficient of friction between…

A: Let;  the weight of the ladder W=34lb length of the ladder be 12ft hence the com will be at 6ft…

Q: The two structural members, one of which is in tension and the other in compression, exert the…

A: It is given that the tension force is 2.3kN and the compression force is 5.3kN. Therefore, the…

Q: A 240-kg uniform steel beam 7.75 m in length rests against a frictionless vertical wall, making an…

A: Given: Mass of the beam m = 240 kg length if steel beam L = 7.75 m inclination angle θ = 60.0° mass…

Q: How much tension must a 28.0 m long wire be able to exert without breaking when it is used to hang…

A: So here the wire must able to exert a tension of 1701.19N≃1701.2 NExplanation:

Q: A person whose mass is m = 59.5 kg steps on a mechanical bathroom scale placed on an inclined plane…

A: As the bathroom scale is placed on the inclined plane at an angle 28.3° , the reading on the scale…

Q: Problem 10: Show how to resolve each force into its x, y, z components. Set up the calculation used…

A: The component of a general vector v→ along some direction is given by V cosθ, where θ is the angle…

Q: Two children push on opposite sides of a door during play. Both push horizontally and perpendicular…

A: Given: Two children push on opposite sides of a door during play. Both push horizontally and…

Q: A uniform horizontal strut weighs 360.0 N. One end of the strut is attached to a hinged support at…

A: Kinematics.

Q: A 200 N sign hangs from the middle of a cable between two buildings. The ends of each cable are…

A: For the sign to be in equilibrium, the net force on the sign in vertical direction must be zero. The…

Q: 6. A uniform ladder 10.0 m long is leaning against a frictionless wall at an angle of 60.0° above…

A:

Q: You are working in an ice skating rink and have been asked to hang a new banner on the wall. Your…

A: For the ladder to not slip, it must remain in translational as well rotational equilibrium. The…

Q: A block with a mass of M = 10 kg is sat on a 45° slanted surface. What is the minimal force F…

A:

Center of Gravity of a system

The centre of gravity is a property that is based on the geometry of a rigid body or any particle. It is described as an equilibrium point or a hypothetical location where the total weight of the body is concentrated.